bootmod3: Direct ENET cable support for iOS/Android (BETA)

EricP3 · 09-09-2021, 06:39 AM

Quote:

Originally Posted by fiveohwblow

Are you guys disabling wifi on your phones first? If you do not, it will not connect.

Not only wifi but I also usually disable bluetooth otherwise you cant have multiple things connected at once. I just flashed on iOS 14.7.1 the other day.

mike@x-ph.com · 09-09-2021, 08:39 AM

Quote:

Originally Posted by EricP3

Not only wifi but I also usually disable bluetooth otherwise you cant have multiple things connected at once. I just flashed on iOS 14.7.1 the other day.

I do the same, pretty much disable all outside connections

hellokitty · 09-09-2021, 09:01 AM

Quote:

Originally Posted by vrooooom

Quote:

Originally Posted by fiveohwblow

Are you guys disabling wifi on your phones first? If you do not, it will not connect.

Yup, wifi disabled so CarPlay won't engage.

Yup, manual IP: 169.254.250.250 with Subnet Mask: 255.255.0.0

No luck. Eventually I'll get this working. Eventually.

Did you disconnect the battery, wait for 10 mins and reconnect?

vrooooom · 09-09-2021, 10:32 AM

Quote:

Originally Posted by mike@x-ph.com

I do the same, pretty much disable all outside connections

BM3 needs to be connected to the net doesn’t it? My LTE is the only thing that’s on.

mike@x-ph.com · 09-09-2021, 11:25 AM

Quote:

Originally Posted by vrooooom

BM3 needs to be connected to the net doesn’t it? My LTE is the only thing that’s on.

yes you need to keep one connection and disable everything else including bluetooth

hellokitty · 09-25-2021, 07:55 AM

Well going from 14.7.1 to iOS 15 broke my direct enet connection.

Anyone know how to fix or does bootmod need to update their app?

hellokitty · 09-25-2021, 08:34 AM

Quote:

Originally Posted by hellokitty

Well going from 14.7.1 to iOS 15 broke my direct enet connection.

Anyone know how to fix or does bootmod need to update their app?

Nvm I fixed it by adjusting Ethernet IP manually.

sly1types · 09-27-2021, 06:11 PM

Quote:

Originally Posted by hellokitty

Nvm I fixed it by adjusting Ethernet IP manually.

Did you have to do anything else? my ethernet settings were gone, but i put them in and it still won't connect. Works just fine with my laptop...

I did update to IOS15 yesterday.

hellokitty · 09-27-2021, 06:38 PM

Quote:

Originally Posted by sly1types

Did you have to do anything else? my ethernet settings were gone, but i put them in and it still won't connect. Works just fine with my laptop...

I did update to IOS15 yesterday.

Per my discussion with PTF, iOS15 broke ethernet connectivity. Apple is working on fixing this.

tomfraser · 10-01-2021, 02:14 PM

Worked fine for me with my iPhone 13 - connected and flashed some settings changes on the stage 2 multi-map - did not manually change any of the Ethernet settings.

hellokitty · 10-01-2021, 11:52 PM

15.0.1 still broken for me :/

CT92F80 · 10-02-2021, 12:47 AM

Just my luck updated my iPhone, now things don't work!!!=(…

hellokitty · 10-02-2021, 12:00 PM

Quote:

Originally Posted by CT92F80

Just my luck updated my iPhone, now things don't work!!!=(…

Just spent a good portion of this morning going back to 14.8 via iTunes restore.

Everything works again lol

18BMWX5M · 10-02-2021, 08:31 PM

I'm having a similar issue as everyone here, except I'm able to connect to the vehicle and get an ip and I'm able to log into the app and connect the vehicle and it sees the vin. While using the app it constantly disconnects and I get the yellow bar that says vehicle not connected and then it reconnect sometimes. This is with the lightning to ethernet adaptor. When I updated the WI-Fi agent I have, it does the same exact thing. I know I'm still connected to the vehicle has my e-net cable has a light letting me know I'm connected to the vehicle and that's always lit up. The lightning adaptor also has a connection light, so I don't think it's the cable or adaptors. When I use this same setup for bimmercode it works flawlessly and no issue with it dropping connection, so I'm assuming it's the BM3 app on my phone. I've deleted the app and restated the phone and then re-downloaded the app to the phone and still same issue.

I'm at my wits end with this as to be honest, does anyone else have a possible solution?

vrooooom · 10-02-2021, 11:24 PM

Use your laptop and not risk it.

My first BM3 connection I used my iphone and for some reason it was able to see it. I flashed it but halfway thru it disappeared and didn't finish flashing. That got my heart beating fast.

I want to still connect my phone (but unsuccessful) but more for monitoring AIT temps etc.

chewbakam4 · 10-03-2021, 07:37 AM

Its an Apple issue as of iOS 15. There is a post on the bootmod3 ethusiasts facebook group discussing it and a screenshot of Apple confirming the issue on their end was shown and an indication that they (Apple) are working to fix it. This affects any app using ethernet on iOS 15 not just BM3. Funny enough Apple didn’t break iPadOS 15, works just fine there still. I don’t know why but Apple’s updates over the last 2 years have always been so buggy at start.

TopJimmy · 10-03-2021, 09:57 AM

It's slightly off topic but one of these WiFi jobs is my new go-to for flashing and logging. There's no wire to get stuck underfoot, but you can plug in an Ethernet patch cord to make it a full ENET cable.

Someone else mentioned MHD makes them too. Bryan from Kies hooked me up with one.

CT92F80 · 10-07-2021, 08:17 PM

Quote:

Originally Posted by TopJimmy

It's slightly off topic but one of these WiFi jobs is my new go-to for flashing and logging. There's no wire to get stuck underfoot, but you can plug in an Ethernet patch cord to make it a full ENET cable.

Someone else mentioned MHD makes them too. Bryan from Kies hooked me up with one.

I got the same one from Kies. Do you notice the wifi dongle get hot after use? I tried to connect with my iphone with ios 15.0.0 still can't connect. I have not tried hard wiring it yet, but that defeats the purpose....

TopJimmy · 10-07-2021, 08:28 PM

Quote:

Originally Posted by CT92F80

Quote:

Originally Posted by TopJimmy

It's slightly off topic but one of these WiFi jobs is my new go-to for flashing and logging. There's no wire to get stuck underfoot, but you can plug in an Ethernet patch cord to make it a full ENET cable.

Someone else mentioned MHD makes them too. Bryan from Kies hooked me up with one.

I got the same one from Kies. Do you notice the wifi dongle get hot after use? I tried to connect with my iphone with ios 15.0.0 still can't connect. I have not tried hard wiring it yet, but that defeats the purpose....

I have not noticed mine hot, but next time I'll pay more attention.

Uni-Rapide · 10-11-2021, 07:38 AM

Quote:

Originally Posted by 18BMWX5M

I'm having a similar issue as everyone here, except I'm able to connect to the vehicle and get an ip and I'm able to log into the app and connect the vehicle and it sees the vin. While using the app it constantly disconnects and I get the yellow bar that says vehicle not connected and then it reconnect sometimes. This is with the lightning to ethernet adaptor. When I updated the WI-Fi agent I have, it does the same exact thing. I know I'm still connected to the vehicle has my e-net cable has a light letting me know I'm connected to the vehicle and that's always lit up. The lightning adaptor also has a connection light, so I don't think it's the cable or adaptors. When I use this same setup for bimmercode it works flawlessly and no issue with it dropping connection, so I'm assuming it's the BM3 app on my phone. I've deleted the app and restated the phone and then re-downloaded the app to the phone and still same issue.

I'm at my wits end with this as to be honest, does anyone else have a possible solution?

I had that same issue because I selected one or more datalog channels (in the Other Channels section) that were not compatible with my car. As soon as I turned those off all was fine again.
Maybe that works for you as well?

18BMWX5M · 10-11-2021, 11:04 AM

Quote:

Originally Posted by Uni-Rapide

I had that same issue because I selected one or more datalog channels (in the Other Channels section) that were not compatible with my car. As soon as I turned those off all was fine again.
Maybe that works for you as well?

I have no other channels selected. I never added any channels other than what's on by default.

hellokitty · 10-11-2021, 11:16 PM

iOS 15.0.2 came out today. Anyone know if this fixes the Ethernet connectivity bug?

09-25-2021, 07:55 AM	#94
hellokitty Brigadier General 2937 Rep 3,737 Posts Drives: '17 M3 ZCP DCT Join Date: Jul 2010 Location: Southern California iTrader: (2)	Well going from 14.7.1 to iOS 15 broke my direct enet connection. Anyone know how to fix or does bootmod need to update their app? __________________ 2017 F80 M3 ZCP / AA GESI DPs / Akrapovic Evo / BBS FI-R 19" / Bend Calibration ECUTEK Flex Fuel \| Bilstein B16 DDC + CS EDC / BMC Filters / BMS OCC / CSF HE / ESS CP / Nitto NT555R2 / PD Crank Hub / SPL Suspension / Uniden R7 / Wagner Top Mount IC 2021 Mini GP3 / BMC Filters / BM3 / Cary Jordan E30 / Wagner IC / Remus Race
	Appreciate 0 Quote

10-01-2021, 02:14 PM	#98
tomfraser Private 109 Rep 93 Posts Drives: 2014 Mineral Grey F80 M3 Join Date: Jun 2016 Location: Auckland iTrader: (0)	Worked fine for me with my iPhone 13 - connected and flashed some settings changes on the stage 2 multi-map - did not manually change any of the Ethernet settings.
	Appreciate 0 Quote

10-01-2021, 11:52 PM	#99
hellokitty Brigadier General 2937 Rep 3,737 Posts Drives: '17 M3 ZCP DCT Join Date: Jul 2010 Location: Southern California iTrader: (2)	15.0.1 still broken for me :/ __________________ 2017 F80 M3 ZCP / AA GESI DPs / Akrapovic Evo / BBS FI-R 19" / Bend Calibration ECUTEK Flex Fuel \| Bilstein B16 DDC + CS EDC / BMC Filters / BMS OCC / CSF HE / ESS CP / Nitto NT555R2 / PD Crank Hub / SPL Suspension / Uniden R7 / Wagner Top Mount IC 2021 Mini GP3 / BMC Filters / BM3 / Cary Jordan E30 / Wagner IC / Remus Race
	Appreciate 1 JohnM47.50 Quote

10-02-2021, 12:47 AM	#100
CT92F80 First Lieutenant 137 Rep 328 Posts Drives: 2017 F80 Join Date: Apr 2018 Location: SoCal iTrader: (4)	Just my luck updated my iPhone, now things don't work!!!=(…
	Appreciate 0 Quote

10-02-2021, 08:31 PM	#102
18BMWX5M First Lieutenant 569 Rep 379 Posts Drives: 2016 BMW M4 Join Date: Mar 2018 Location: Rhode Island iTrader: (0)	I'm having a similar issue as everyone here, except I'm able to connect to the vehicle and get an ip and I'm able to log into the app and connect the vehicle and it sees the vin. While using the app it constantly disconnects and I get the yellow bar that says vehicle not connected and then it reconnect sometimes. This is with the lightning to ethernet adaptor. When I updated the WI-Fi agent I have, it does the same exact thing. I know I'm still connected to the vehicle has my e-net cable has a light letting me know I'm connected to the vehicle and that's always lit up. The lightning adaptor also has a connection light, so I don't think it's the cable or adaptors. When I use this same setup for bimmercode it works flawlessly and no issue with it dropping connection, so I'm assuming it's the BM3 app on my phone. I've deleted the app and restated the phone and then re-downloaded the app to the phone and still same issue. I'm at my wits end with this as to be honest, does anyone else have a possible solution?
	Appreciate 0 Quote

10-02-2021, 11:24 PM	#103
vrooooom New BMW owner 337 Rep 872 Posts Drives: 2018 BMW M2 LCI Join Date: Feb 2021 Location: Philippines iTrader: (0)	Use your laptop and not risk it. My first BM3 connection I used my iphone and for some reason it was able to see it. I flashed it but halfway thru it disappeared and didn't finish flashing. That got my heart beating fast. I want to still connect my phone (but unsuccessful) but more for monitoring AIT temps etc. __________________ 2018 BMW M2 LCI BM3 Stage 2 + MPE + FTP charge pipe + MST V2 Inlet + TurboSmart DV + CSF FMIC + AA Hi-flow Downpipe + Turner Rear Shifter Bushing + Wiechers Strut Brace + Bilstein B16 PSS10 + Apex VS-5RS
	Appreciate 0 Quote

10-03-2021, 07:37 AM	#104
chewbakam4 Major 718 Rep 1,182 Posts Drives: F82 M4 Join Date: Oct 2015 Location: Malton iTrader: (0)	Its an Apple issue as of iOS 15. There is a post on the bootmod3 ethusiasts facebook group discussing it and a screenshot of Apple confirming the issue on their end was shown and an indication that they (Apple) are working to fix it. This affects any app using ethernet on iOS 15 not just BM3. Funny enough Apple didn’t break iPadOS 15, works just fine there still. I don’t know why but Apple’s updates over the last 2 years have always been so buggy at start.
	Appreciate 1 hellokitty2936.50 Quote

10-03-2021, 09:57 AM	#105
TopJimmy Major General 6151 Rep 5,524 Posts Drives: 2023 M3 Comp xDrive Join Date: Jul 2019 Location: Chester County, PA iTrader: (5)	It's slightly off topic but one of these WiFi jobs is my new go-to for flashing and logging. There's no wire to get stuck underfoot, but you can plug in an Ethernet patch cord to make it a full ENET cable. Someone else mentioned MHD makes them too. Bryan from Kies hooked me up with one. Attached Images __________________ '18 F80 Base 6MT \| '19 F82 Exec DCT \| '18 F82 Comp Exec DCT \| '23 G80cx
	Appreciate 1 fiveohwblow3631.50 Quote

10-11-2021, 11:16 PM	#110
hellokitty Brigadier General 2937 Rep 3,737 Posts Drives: '17 M3 ZCP DCT Join Date: Jul 2010 Location: Southern California iTrader: (2)	iOS 15.0.2 came out today. Anyone know if this fixes the Ethernet connectivity bug? __________________ 2017 F80 M3 ZCP / AA GESI DPs / Akrapovic Evo / BBS FI-R 19" / Bend Calibration ECUTEK Flex Fuel \| Bilstein B16 DDC + CS EDC / BMC Filters / BMS OCC / CSF HE / ESS CP / Nitto NT555R2 / PD Crank Hub / SPL Suspension / Uniden R7 / Wagner Top Mount IC 2021 Mini GP3 / BMC Filters / BM3 / Cary Jordan E30 / Wagner IC / Remus Race
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search