Coding - Pay It Forward

[shawnsheridan]

Originally Posted by vafan13

wanted to double check...is there a newer version of the "E-Sys - Getting Started Coding v.2.pdf" linked to in the first thread? Want to make sure I don't F anything up when coding Euro MDM* on my F10 M5.

*and probably TPMS to show temp/pressure and a few other smaller things.

No, there is not.

[vafan13]

Originally Posted by shawnsheridan

No, there is not.

OK, thanks. So after setting up the software, to do my Euro MDM coding I'd want to:

1. connect to the car using the "...VehicleInfo=F010" (non-direct) Target & Connection Via VIN

2. Click Read (and, to be safe, save a backup?)

3. Click Read SVT

4. Select the CAFD under DSC and select "Read coding data"

5. Right-click the new CAFD file under said CAFD and select "Edit FDL"

6. Update the 7 entries listed here

7. Click "Save", hit green back arrow, right-click FA, and select "Activate FA"

8. Re-select the same CAFD file I did the updates in and select "CODE FDL"

9. Wait for that to be Done, then disconnect and I'm done?

[shawnsheridan]

Originally Posted by vafan13

OK, thanks. So after setting up the software, to do my Euro MDM coding I'd want to:

1. connect to the car using the "...VehicleInfo=F010" (non-direct) Target & Connection Via VIN

2. Click Read (and, to be safe, save a backup?)

3. Click Read SVT

4. Select the CAFD under DSC and select "Read coding data"

5. Right-click the new CAFD file under said CAFD and select "Edit FDL"

6. Update the 7 entries listed here

7. Click "Save", hit green back arrow, right-click FA, and select "Activate FA"

8. Re-select the same CAFD file I did the updates in and select "CODE FDL"

9. Wait for that to be Done, then disconnect and I'm done?

That's the process.

[vafan13]

Originally Posted by shawnsheridan

That's the process.

awesome, thanks!

[scop1971]

Hi Guys,

I'm getting totally confused and lost track of versions, files and so on...

At the moment i'm using ISTA/D (basically for adaptations and diagnosis) and i would like to start poking around with coding.

Can someone send me a link to the last version of E-Sys please? I'd be really grateful, more i read more i find lost

[shawnsheridan]

Originally Posted by scop1971

Hi Guys,

I'm getting totally confused and lost track of versions, files and so on...

At the moment i'm using ISTA/D (basically for adaptations and diagnosis) and i would like to start poking around with coding.

Can someone send me a link to the last version of E-Sys please? I'd be really grateful, more i read more i find lost

PM sent.

[warpeacelove]

Originally Posted by JNoSol

Guys, I just wanted to give a shout-out to shawnsheridan. He's the most helpful member on this forum. Without his help, I wouldn't even know where to start.

Messaging with Shawn back and forth, I finally loaded the software to another laptop (work laptop had firewall, so it wouldn't connect). I went code crazy all morning. Coded the following:
- Euro MDM
- Rear Fog Light - thanks to tom @ eas
- Remove legal warning on nav screen
- Remove seatbelt warning
- DVDinMotion
- A/C memory
- Unlock doors at engine shut-off
- Brake Force Flashing

Refer to the VO coding document for the anti-dazzle or Euro LED headlight. U.S. DOT didn't approve BMW's anti-dazzle technology so you must change the vehicle order (VO). Follow each step carefully.

Cable Link: http://www.ebay.com/itm/OBD2-ENET-Et...135320&vxp=mtr

If you guys have any questions on how to get started, let me know. If you need the links to the software files, ping Shawn.

Shawn doesn't want any money for helping us out. If you're feeling generous, please donate to his buddy who's been providing the Coding Application data and hosting all the coding software/data. Paypal email below.

warpeddriveservices@gmail.com

I gotten hundreds of dollars worth of features for my car. I hooked his buddy up with a small donation for the support to the BMW community. Pay it Forward.

Once your software is installed, you'll just need these 2 documents attached. If you follow these 3 simple rules, you will not do any damage to your car:

1. Never click on the "Code Default Values" button
2. Backup (Read and Save) FA, SVT, and CAFD files before you start
3. Only code the CAFD files (green circle)

Euro MDM parameter under DSC Module:
C_Laenderkennung => ECE
CTpmsMarket => EU
CPrewarnEnable => enable
CPrewarnIgnition => enable
CalLrPDevMax => 50kpa
CPInitRangeMax => 80kpa
UiaSetLevelPc => 20%
UiwSetLevelPc => 15%

More info here: http://x3.xbimmers.com/forums/showthread.php?t=715297

I don’t see those parameters at all in the CAF [DSC_CT01M]. I am trying to enable the Euro MDM. Any assistance will be appreciated!

[emgee]

Hi Shawn where can I get the latest E-sys?

[shawnsheridan]

Originally Posted by emgee

Hi Shawn where can I get the latest E-sys?

PM sent.

[johnboy151]

Hey Shawn, Can I get the latest e-sys software kink? Much appreciated!

[shawnsheridan]

Originally Posted by johnboy151

Hey Shawn, Can I get the latest e-sys software kink? Much appreciated!

PM sent.

[ownalaneF82]

Hi Shawn, am reading around and you really know your stuff. I am trying to learn how to FDL code my F82 to get the GTS steering, diff and maybe Euro MDM. Already BM3'd the DCT.

My I step is F020-17-07-507. I just downloaded ESys v3.27.1 and have a v4.27.20_PSdZData_Full file loaded.(not sure how to cross reference to versions called out on this forum like 58 etc. ?) Also have the launcher and Rearm and it fires up for me ok.

My main question is do I have the software correct and will I still be able to FDL code all GTS goodies less the DCT without any compatibility issues due to the older I-step??

Wanting -M4GTS coding; GHAS, EPS, ICM EDC/VDC -(DSC??); Euro MDM.

Any guidance and potential cheat sheets for this would be a blessing post Christmas here.

[shawnsheridan]

Originally Posted by ownalaneF82

Hi Shawn, am reading around and you really know your stuff. I am trying to learn how to FDL code my F82 to get the GTS steering, diff and maybe Euro MDM. Already BM3'd the DCT.

My I step is F020-17-07-507. I just downloaded ESys v3.27.1 and have a v4.27.20_PSdZData_Full file loaded.(not sure how to cross reference to versions called out on this forum like 58 etc. ?) Also have the launcher and Rearm and it fires up for me ok.

My main question is do I have the software correct and will I still be able to FDL code all GTS goodies less the DCT without any compatibility issues due to the older I-step??

Wanting -M4GTS coding; GHAS, EPS, ICM EDC/VDC -(DSC??); Euro MDM.

Any guidance and potential cheat sheets for this would be a blessing post Christmas here.

ESys v3.27.1 and have a v4.27.20_PSdZData is fine. You also need E-Sys Launcher for FDL Coding:

Links are there:

http://tokenmaster.blogspot.com/2019...r-pro-282.html

[ownalaneF82]

Originally Posted by shawnsheridan

ESys v3.27.1 and have a v4.27.20_PSdZData is fine. You also need E-Sys Launcher for FDL Coding:

Links are there:

http://tokenmaster.blogspot.com/2019...r-pro-282.html

Thanks Shawn I forgot to mention I have the Esys Launcher Premium V.2.8.2.155 with a Premium Rearm if that works the same as the Pro?

[shawnsheridan]

Originally Posted by ownalaneF82

Thanks Shawn I forgot to mention I have the Esys Launcher Premium V.2.8.2.155 with a Premium Rearm if that works the same as the Pro?

It should although PRO 2.8.2 is better than PREMIUM 2.8.2.

[F82SO2]

Quick question, after coding gts features in the car if I were to use the app Bimmercode (android) to code a different feature would that override things that I had already coded with Esys?

[An20Olives]

Hey Shawn would you be able to point me in the direction of the latest software? Thank you.shawnsheridan

[shawnsheridan]

Originally Posted by An20Olives

Hey Shawn would you be able to point me in the direction of the latest software? Thank you.shawnsheridan

PM sent.

[Eldaes]

is this ISTA or Esys?

[shawnsheridan]

Originally Posted by Eldaes

is this ISTA or Esys?

E-Sys.

[Imperial328i]

Oh great shawnsheridan, could I please have a link?

[toni8284]

Can I have the link please?