NYC/Tri-state recommendations for a crank hub installer/shop?

[Pewtinn]

From NYC. Looking for a recommended shop to get crank hub work done. Thanks in advance!

[G MONEY]

Originally Posted by Pewtinn

From NYC. Looking for a recommended shop to get crank hub work done. Thanks in advance!

Kies motor sports

[Info@mad-us.com]

Mpire Performance

[slowpokemd]

Autocouture in fairlawn, NJ seems well reviewed. I stopped by there the other day, and they seem to have an impressive operation. If I go this route, I will likely use them for this.

[RElias21]

The Stance Shop to have it done at half the price.

[Pewtinn]

All suggestions seem like reputable shops. Anyone personally had their work done there, and if so what was the pricing?

[Info@mad-us.com]

Originally Posted by Pewtinn

All suggestions seem like reputable shops. Anyone personally had their work done there, and if so what was the pricing?

Called the owner of Mpire Performance for you. He said $4000 Including the Insane performance crank hub.

https://insanecrankhub.com/collectio...37519541272771

They are an extremely qualified shop many engine builds, crank hubs and performance part installs.

[RElias21]

I asked Keith (owner of the Stance Shop).

He said:

4K Installed
Insane performance 4 pin 1 piece
1 day turnaround.


I personally have not done my crank hub anywhere.

[Info@mad-us.com]

Originally Posted by RElias21

I asked Keith (owner of the Stance Shop).

He said:

4K Installed
Insane performance 4 pin 1 piece
1 day turnaround.


I personally have not done my crank hub anywhere.

Another great shop and dealer of ours!

They are also on the Insane crank hub installer list

https://insanecrankhub.com/pages/store-locator-1

[f80tanz]

$3750 at AutoCouture installed- they use the Gintani solution. I'll be looking to get it done this summer, but I'm sure a bunch of people on this forum have got it done through them.

[TurboI6]

Got mine done with Doug at JRSPERFORMANCE in 2020. He is a BMW Master technician and has a beautiful shop in his home where he does this side work. When I dropped my car off he must've had 30+ old crank hubs lined up on a shop bench. I paid $2400 all in, I only brought my car and the crankhub. I got my hub new from IP for $700.

Almost 2 years and 15k mikes, lots of track days no issues.

https://instagram.com/jrsperformance...d=YmMyMTA2M2Y=

[Jonzny]

Originally Posted by TurboI6

Got mine done with Doug at JRSPERFORMANCE in 2020. He is a BMW Master technician and has a beautiful shop in his home where he does this side work. When I dropped my car off he must've had 30+ old crank hubs lined up on a shop bench. I paid $2400 all in, I only brought my car and the crankhub. I got my hub new from IP for $700.

Almost 2 years and 15k mikes, lots of track days no issues.

https://instagram.com/jrsperformance...d=YmMyMTA2M2Y=

That's by far and away the best deal in the tri-state, at least that I've heard of.

[Info@mad-us.com]

Originally Posted by Jonzny

That's by far and away the best deal in the tri-state, at least that I've heard of.

Prices have gone up since 2020 unfortunately though. So at current rates if the labor is still the same your looking at around 3400 with the Insane hub. Not bad at all.

[Mike.]

tuning works in copaigue- I paid 3K for mine. got it done last year

[White340]

I know this is a lot of labor but just wondering how many actual hours - 20?

[Pewtinn]

Are most people getting the crank hub done, or just the capture, or both?!

I feel like most of the cost is in the labor, so why not get the CH done and not just the capture? Pls correct me if I'm wrong

[FrankEbONEZ]

I had just the capture done and spun my crank hub casually driving at 30 miles an hour with the DCT in softest setting and in auto. That's why I'd go CH instead of or with the capture. The capture alone did nothing for me (yes the bolt was checked/re-torqued before putting on the capture).

Currently getting the CH done @ M autowerks in Congers, NY. They've been great so far. I'll share my full experience with them when I get my car back.

[Bernina5]

Originally Posted by Pewtinn

From NYC. Looking for a recommended shop to get crank hub work done. Thanks in advance!

Originally Posted by Pewtinn

From NYC. Looking for a recommended shop to get crank hub work done. Thanks in advance!

Hey not sure if your still checking around but M life auto care in valley stream- they do good work. I had to go in for entire valve cover gasket replacement I was in and out in couple of hours.. and it was on the spot! I just pulled up. They are good people!

[M3god]

Originally Posted by Bernina5

Hey not sure if your still checking around but M life auto care in valley stream- they do good work. I had to go in for entire valve cover gasket replacement I was in and out in couple of hours.. and it was on the spot! I just pulled up. They are good people!

Great people for sure but there prices are crazy

[Jonzny]

Originally Posted by FrankEbONEZ

I had just the capture done and spun my crank hub casually driving at 30 miles an hour with the DCT in softest setting and in auto. That's why I'd go CH instead of or with the capture. The capture alone did nothing for me (yes the bolt was checked/re-torqued before putting on the capture).

Currently getting the CH done @ M autowerks in Congers, NY. They've been great so far. I'll share my full experience with them when I get my car back.

This is close to me, how much are they charging? Which hub?

[Bernina5]

Originally Posted by AustinYellowm3

Great people for sure but there prices are crazy

Originally Posted by AustinYellowm3

Great people for sure but there prices are crazy

Yes expensive for sure, I also reached out to auto couture motoring in jersey and that was 3750 out the door with the gintani machined 1 piece

[FrankEbONEZ]

Originally Posted by Jonzny

This is close to me, how much are they charging? Which hub?

Not sure just yet, the car died while cruising at 30 mph. It was definitely a result of the CH but not positive if there's any other damage so he didn't want to give me a price until he knew.

The gintani crank hub should be there today and he's supposed to start on it tomorrow. I plan on swinging through tomorrow or Thursday and if its just the CH i should have a price to update you with.