Seat Calibration Erroe Code

M3EW · 01-07-2024, 04:28 AM

Been getting these two codes but my drive never shows any need for seat calibration. Any fix?

TheNine90 · 01-07-2024, 10:54 AM

If there seats are moving correctly you can ignore it. To clear the errors you have to calibrate it.

Wanted_M · 01-07-2024, 01:26 PM

Calibration is easy, turn ignition on (vehicle off), press seat side button to move the seat forward all the way, keep pressing the side button forward, the seat will stop travel then it will move a little further than normal and it resets back to its furthest travel. That last over travel is the calibration check. Release the button.

Move seat back to its normal resting position, cycle ignition off/on, if it doesn't clear try again, it took me twice. Also click on the error displayed on your screen and it should show you the procedure to calibrate the seat. That should reset your seat calibration warning.

M3EW · 01-08-2024, 06:07 PM

Quote:

Originally Posted by Wanted_M

Calibration is easy, turn ignition on (vehicle off), press seat side button to move the seat forward all the way, keep pressing the side button forward, the seat will stop travel then it will move a little further than normal and it resets back to its furthest travel. That last over travel is the calibration check. Release the button.

Move seat back to its normal resting position, cycle ignition off/on, if it doesn't clear try again, it took me twice. Also click on the error displayed on your screen and it should show you the procedure to calibrate the seat. That should reset your seat calibration warning.

turns out it was the passenger seat this whole time thanks

Wanted_M · 01-08-2024, 08:47 PM

Cool, glad it worked out.

01-07-2024, 04:28 AM	#1
M3EW Lieutenant 221 Rep 528 Posts Drives: F80 M3 Join Date: Aug 2017 Location: California iTrader: (3)	Seat Calibration Erroe Code Been getting these two codes but my drive never shows any need for seat calibration. Any fix? Attached Images __________________ @cheungkyf80
	Appreciate 0 Tweet Quote

01-07-2024, 10:54 AM	#2
TheNine90 Banned 578 Rep 2,047 Posts Drives: bmw Join Date: Aug 2021 Location: Workshop iTrader: (0)	If there seats are moving correctly you can ignore it. To clear the errors you have to calibrate it.
	Appreciate 0 Quote

01-07-2024, 01:26 PM	#3
Wanted_M Captain 759 Rep 950 Posts Drives: Frozen Blue M4CS Join Date: Jul 2009 Location: Norcal iTrader: (2)	Calibration is easy, turn ignition on (vehicle off), press seat side button to move the seat forward all the way, keep pressing the side button forward, the seat will stop travel then it will move a little further than normal and it resets back to its furthest travel. That last over travel is the calibration check. Release the button. Move seat back to its normal resting position, cycle ignition off/on, if it doesn't clear try again, it took me twice. Also click on the error displayed on your screen and it should show you the procedure to calibrate the seat. That should reset your seat calibration warning. __________________ M4CS Frozen Blue ARM DP's/Resonated Mid-pipe \| SPL links \| Hotchkis bars \| JRZ RS2/camber plates \| K&N \| Koyorad HX \| Powerflex purple \| Rouge \| Spiegler \| Speed Eng. snorkel \| Vargas CBC/hub \| Wagner IC \| xHP \| Xpel stealth ppf
	Appreciate 0 Quote

01-08-2024, 08:47 PM	#5
Wanted_M Captain 759 Rep 950 Posts Drives: Frozen Blue M4CS Join Date: Jul 2009 Location: Norcal iTrader: (2)	Cool, glad it worked out. __________________ M4CS Frozen Blue ARM DP's/Resonated Mid-pipe \| SPL links \| Hotchkis bars \| JRZ RS2/camber plates \| K&N \| Koyorad HX \| Powerflex purple \| Rouge \| Spiegler \| Speed Eng. snorkel \| Vargas CBC/hub \| Wagner IC \| xHP \| Xpel stealth ppf
	Appreciate 0 Quote