Eibach PROKIT lowering M4

[keanoncars]

Hi Bimmers!

If anyone should be curios of how much lower the BMW M4 gets when lowered with the Eibach PROKIT, i just wanted to share the latest video on my channel, where we are doing exactly this

Just to get the specs straight, the Eibach PROKIT will lower you M3/M4 by 20mm in the front and 5-10mm in the rear. This means, that if you have the M-Performance front splitter it could be a problem going over speed bumps... but who cares

Besides the lowering i have chosen the 15mm spacers for the front wheels and 12mm for the rear wheels. This setup might be just on the edge. I maybe would have chosen 12 front and 10 rear, if i had to redo it.

Anyway... What do you think?

[AlterZgo]

Nice Job. In the future I suggest posting in the suspension forum.

Also, I would personally stay with 15mm spacers all around. 12/10 mm spacers just aren’t aggressive enough when the car is lowered. I run 15 all around and with 285 rear tires I get zero rubbing under any condition.

[keanoncars]

Originally Posted by AlterZgo

Nice Job. In the future I suggest posting in the suspension forum.

Also, I would personally stay with 15mm spacers all around. 12/10 mm spacers just aren’t aggressive enough when the car is lowered. I run 15 all around and with 285 rear tires I get zero rubbing under any condition.

Ahhhhh... I didn't see that there were such forum.

285 tires! When you look at the back fenders down from top, you dont see the tyre edge? I see the tyre side now with 275, so i imagine you will see the edge even more with 285?

[uniqueMR]