Autotalent
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Engine / Drivetrain / Exhaust / Bolt-ons / Tuning

Post Reply
 
Thread Tools Search this Thread
      07-25-2013, 11:52 PM   #67
flinchy
Brigadier General
134
Rep
3,101
Posts

Drives: E82 135i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

I need to say, just because it makes 400ft-lb doesnt mean it MUST make it at redline, or that it has a low redline, or anything

It could make 400ft-lb WAY before redline..
Appreciate 0
      07-25-2013, 11:57 PM   #68
flinchy
Brigadier General
134
Rep
3,101
Posts

Drives: E82 135i
Join Date: Nov 2011
Location: QLD, Australia

iTrader: (0)

Quote:
Originally Posted by Mangler
Quote:
Originally Posted by Brosef
Quote:
Originally Posted by Boss330 View Post
No, it's only 600rpm apart... Or 7,8%

Hardly worlds apart...

The E30 M3 S14 engine had a rev limit of 7300rpm

The E36 M3 S50 engine had a rev limit of 7200rpm

The E46 M3 S54 engine had a rev limit of 8000rpm

The E9x M3 S65 engine has a rev limit of 8300rpm

Never heard much complaint about low rev limit on the prevoius straight engine M3's before...
tough to settle for a hamburger after you've had steak.
I know. After the e30 they have all been mutton.

T
Mutton is great if you slow cook it

And sometimes i prefer a burger

Apples to oranges haha

If you want an analogy that no one can disagree... It's rare-medium rare slow cooked ribeye vs well done week old rump

Or mcdonalds vs in'n'out
Appreciate 0
      07-26-2013, 12:10 AM   #69
Mahlzeit
Lieutenant
United_States
38
Rep
582
Posts

Drives: 1M
Join Date: Jul 2007
Location: Location Location

iTrader: (0)

In case someone feels the need to analyze another 1M, see this video. There was a camera mounted outside at the rear bumper. Granted I shifted when thrust ran out rather than rpms.


Appreciate 0
      07-26-2013, 12:48 AM   #70
swamp2
Lieutenant General
swamp2's Avatar
United_States
643
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by darmawaa View Post
It's easy for a turbo engine to rev 8000rpm, Mc laren already did that.
What we need is low end torque (peak torque start @1500 rpm) AND 8000rpm redline.
Totally disagree.

1. If it was easy it would be much more widespread.
2. Torque at the crank is meaningless, you can't feel it and it has nothing to do with performance. Torque at the wheels does matter and the current M3 has plenty of that. The only benefit of massive low rpm torque is if you have a desire to never shift (lazy driving as I call it).
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |

Last edited by swamp2; 07-26-2013 at 01:05 AM..
Appreciate 0
      07-26-2013, 12:51 AM   #71
swamp2
Lieutenant General
swamp2's Avatar
United_States
643
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by Mahlzeit View Post
In case someone feels the need to analyze another 1M, see this video. There was a camera mounted outside at the rear bumper. Granted I shifted when thrust ran out rather than rpms.
So in other words it is basically useless. The idea is to verify the technique vs. a known rpm. Sure you could say we could use speed and gear to get back to rpm but that is approximation and error piled on top of each other.
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-26-2013, 01:02 AM   #72
M3_WC
Brigadier General
1048
Rep
3,622
Posts

Drives: M3
Join Date: Jun 2009
Location: CA

iTrader: (0)

Quote:
Originally Posted by swamp2 View Post
Totally disagree.

1. If it was easy it would be much more widespread.
2. Torque at the crank is meaningless, you can't feel it and it has nothing to do with performance. Torque at the wheels does and the current M3 has plenty of that. The only benefit of massive low rpm torque is if you have a desire to never shift (lazy driving as I call it).
+1
Appreciate 0
      07-26-2013, 01:19 AM   #73
ProbyOne
Private
ProbyOne's Avatar
United_States
13
Rep
72
Posts

Drives: Acura TL / E93 M3 / 996
Join Date: Nov 2010
Location: LA

iTrader: (0)

Quote:
Originally Posted by ProbyOne View Post
I also tested a few different dyno runs for various cars before convincing myself that it would work. With the right equipment it would be a pretty good way for racing teams to keep an eye (ear?) on the competition

I didn't have any good audio software on the computer and resorted to matching frequency by using this tone synthesizer http://www.philtulga.com/tone.html. Obviously Audacity is much more accurate with clear audio... I expected to be within ~5-10 Hz based on matching a few other cars really well.

I have a new appreciation for hitting the rev limiter on the dyno. We need someone to get out there with a good mic and radar gun
Just to be clear: I meant matching the audible frequency, not necessarily peak rpms (and especially so in the case of a moving car)
__________________
you are a winner
Appreciate 0
      07-26-2013, 01:21 AM   #74
Mahlzeit
Lieutenant
United_States
38
Rep
582
Posts

Drives: 1M
Join Date: Jul 2007
Location: Location Location

iTrader: (0)

Quote:
Originally Posted by swamp2 View Post
So in other words it is basically useless. The idea is to verify the technique vs. a known rpm. Sure you could say we could use speed and gear to get back to rpm but that is approximation and error piled on top of each other.
LOL,... alright, alright.

So would a video of a 1M sitting in neutral with the tach showing steady state rpms be of use? If so, what rpm?
Appreciate 0
      07-26-2013, 01:47 AM   #75
DANMACINSD
First Lieutenant
57
Rep
324
Posts

Drives: 2013 BMW 535i
Join Date: Nov 2007
Location: SAN DIEGO

iTrader: (1)

If it has the same 8 speed auto tranny, third gear no longer goes to 100. It did in my 335, but in my 535 the gears are a lot closer together.
__________________
13 535i Msport
Appreciate 0
      07-26-2013, 03:01 AM   #76
neo871
Major
neo871's Avatar
Romania
144
Rep
1,399
Posts

Drives: 340i xDrive MPPSK
Join Date: Jul 2005
Location: Bucharest, Romania

iTrader: (0)

Quote:
Originally Posted by S3RI35 View Post
"...and the new M3 will have one of the best engines we have ever done." - Friedrich Nitschke

that's all I need to know :-D

Thanks for sharing this analysis. Science rules!
+1
Appreciate 0
      07-26-2013, 03:56 AM   #77
JC919
Lieutenant Colonel
United_States
76
Rep
1,802
Posts

Drives: CSL
Join Date: Sep 2008
Location: Aberdeen, Scotland

iTrader: (0)

Great work!! If they offer a manual they I will need one when I get back to the states.
__________________
[SIGPIC][/SIGPIC]
2007 GT3 Clubsport w/CGT buckets in Scotland
2003 CSL, SG, Alcon BBK SOLD
2002 M5, SSII/Blk and bone stock. In storage back home in TX
2008 M3, AW/Blk 6MT, lots of track stuff SOLD
Appreciate 0
      07-26-2013, 04:21 AM   #78
Boss330
Major General
Boss330's Avatar
No_Country
1742
Rep
5,110
Posts

Drives: BMW
Join Date: Mar 2012
Location: Earth

iTrader: (0)

Quote:
Originally Posted by ProbyOne View Post
I also tested a few different dyno runs for various cars before convincing myself that it would work. With the right equipment it would be a pretty good way for racing teams to keep an eye (ear?) on the competition
F1 teams did/do a lot of sound analysis of the competition. Especially a few years back, when engine revs and development was free. By doing sound analysis of the opponents engine they could get very good approximations on the HP of the other engines on the grid (max rpm, rate of frequency change (acceleration) etc.).

Based on sound analysis there was even articles in F1 magazines on which of the different engine manufacturers reached what max rpm and how much power they had.

http://www.grandprix.com/ft/ft00345.html

http://asadl.org/jasa/resource/1/jas...s2?bypassSSO=1

http://www.f1technical.net/forum/viewtopic.php?t=2218
Appreciate 0
      07-26-2013, 06:10 AM   #79
Kong Sheng Han
Banned
North Korea
308
Rep
1,140
Posts

Drives: Something something racecar
Join Date: Feb 2013
Location: Austin, Texas

iTrader: (2)

Garage List
2011 BMW 328i  [0.00]
2001 BMW M3  [0.00]
Kinda sounds like my S54. It's still not loud enough though.
Appreciate 0
      07-26-2013, 08:17 AM   #80
MCaro
New Member
0
Rep
9
Posts

Drives: M3 & 335
Join Date: Jul 2013
Location: NJ

iTrader: (0)

Nice analysis, swamp. Just a few questions cause I am curious...
Why did you choose a hanning window?
Did you try a spectrogram to get better time/frequency resolution?
Have you tried running the audio through an adaptive FIR filter to remove white noise?

Overall it's pretty interesting. I didn't know F1 teams did something similar...
Appreciate 0
      07-26-2013, 10:30 AM   #81
jamdun17
Registered
0
Rep
2
Posts

Drives: E36 M3
Join Date: Jul 2012
Location: Ft. lauderdale

iTrader: (0)

Quote:
Originally Posted by flinchy View Post
I need to say, just because it makes 400ft-lb doesnt mean it MUST make it at redline, or that it has a low redline, or anything

It could make 400ft-lb WAY before redline..
It will more then likely make its peak torque well before its redline if it would like some type of a decent power band with a high redline.

Everyone arguing about it not having a high redline is funny. 7700 rpm is high plain and simple and 7700 on a turbo car that will actually make its peak power somewhat close to that without dropping like it feel off a cliff and still be drivable would be INSANE.

For everyone touting about how the Mclaren can do it (also would like to mention that its a MCLAREN SUPERCAR with an engine probably priced as high as an M3) check out its dyno



Yep that's peak power at around 7400-7600rpm....It could have a redline of 15000 rpm, if its not making power there why the hell would you spin it that high. that's like saying i have carbon ceramic brakes but i don't track my car... oh wait ...
Appreciate 0
      07-26-2013, 03:18 PM   #82
bradleyland
TIM YOYO
United_States
1506
Rep
3,282
Posts

Drives: 2013 M3
Join Date: Jun 2010
Location: Vero Beach, FL

iTrader: (0)

Garage List
Quote:
Originally Posted by MCaro View Post
Nice analysis, swamp. Just a few questions cause I am curious...
Why did you choose a hanning window?
Did you try a spectrogram to get better time/frequency resolution?
Have you tried running the audio through an adaptive FIR filter to remove white noise?

Overall it's pretty interesting. I didn't know F1 teams did something similar...
I had similar questions, so I did some exploration of my own.

Why did you choose a hanning window?

I think he probably chose Hanning window because of the dynamic range of the audio data. Although I looked at rectangular as well, and the plot looked pretty good after I applied a lowpass filter.

Did you try a spectrogram to get better time/frequency resolution?

Spectrographs of mechanical sounds are really difficult to interpret. I've attached a screenshot of a short section if you're interested in looking at it. This is the region just before the upshift.

Have you tried running the audio through an adaptive FIR filter to remove white noise?

I'm not really sure what an adaptive FIR filter is. From what I gather, it would required input coefficients that would allow me to narrow the frequency range. I just used a lowpass filter as you can see in my full write-up.

==============

My analysis shows a result that's closer to 7400 RPM. If you download my files, you can open the .aup files with Audacity (it's free). Running spectrum analysis on the audio just before the upshift always gives me values closer to 330 Hz, not 350-360 Hz. Not sure why exactly.

Full write-up: http://upload.bradlanders.com/bimmer...ound-analysis/

Copy/paste of my Markdown source (links won't work, so you'll have to click here for the full version):

Quote:
# F80 M3 Sound Analysis

## Goal

Identify maximum operating RPM of the F80 M3 from a video clip.

## Gathering data

Source video: REDACTED TO AVOID EMBED; SEE FULL VERSION

Extraction process: Audio captured using AudioHijack, imported to Audacity and saved in lossless Audacity internal format. Audio captured from video starting at approximately 3:04.

Full audio section:[listen](audio/f80-m3-03m04s-clip.wav) (16-bit, 44.1 KHz, PCM)

Audacity timeline (full section):

![Audacity timeline for audio selection](images/f80-m3-03m04s-timeline.png)

For our purposes, we will analyze the audio just before the shift "burp" heard at 4.3s. By zooming in on the timeline, we can see the change in frequency pattern with good precision. The section we will analyze is shown below:

![Clip for analysis](images/clip-for-analysis.png)

This is a 0.300s clip, starting at 4.000s.

Clip for analysis:[listen](audio/f80-m3-analysis-clip.wav)

All my source files are available for download at the end of this document.

## Analysis

Based on a quick look at the waveforms zoomed all the way in, the audio extracted from the video appears to be a true stereo recording. Having two tracks of the same audio will confuse frequency analysis because a stereo microphone uses two separate recording sources. These two sources record different audio reflections, based on the direction and orientation of each microphone. To mitigate this, we'll split the stereo tracks, then select one for analysis. I flipped a coin and chose the right channel.

From here, we can see that we've got a pretty decent waveform to work with. Here's the clip at full zoom:

![Analysis clip at full zoom](images/clip-for-analysis-fullzoom.png)

Based on rumors, we know the target redline RPM is around 7700 RPM, which translates to 385 Hz if we accept swamp2's Doppler compensation. A pure series of cylinder firing events should produce a clear series of pressure pulses at that frequency range. Anything distant from that range is either a harmonic or mechanical, wind, or tire noise.

We can use a lowpass filter to discard extraneous noise above 500 Hz, as we know that anything above this mark won't be a cylinder firing impulse pattern We could use a highpass filter as well, but let's see what the lowpass gets us first.

Apply Audacity lowpass: rolloff 48 dB, cuttoff 500 Hz.

This yields a much cleaner waveform, which should help our spectrum analysis significantly.

![After 500 Hz lowpass](images/clip-after-lowpass-500hz.png)

What we're left with is a much purer, almost sinusoidal sounding audio tone.

Filtered clip:[listen](audio/f80-m3-filtered-clip.wav)

This is the point at which we'll perform a frequency analysis. We can see from the waveform that we do not have uniform amplitude, which should be expected given that we're dealing with real world audio. The audio appears to have a dynamic range of around 1:2 to 1:3. We'll look at Hamming and Hanning windowing, as they both represent a good balance of dynamic range and frequency resolution. They're also a good fit because we've used a lowpass filter to restrict our frequency range to 0-500 Hz; the lower boundary actually being much higher than 0 Hz, as video recording equipment bottoms out well above 0 Hz.

Note: I find the plots easier to read without the grid lines, but I've provided both with and without in the download.

### Hamming window

![Hamming window frequency analysis, log, no grid](images/hamming-nogrid.png)

### Hanning window

![Hanning window frequency analysis, log, no grid](images/hanning-nogrid.png)

## Results

Hamming produces a peak at 325 Hz, and Hanning at 327 Hz. It's worth noting that, although I didn't show it here, using a Rectangular windowing function also resulted in highest amplitude peak around 330 Hz. I also performed analysis on the unfiltered audio, which showed similar peaks (but with more noise, obviously).

I'll be generous (to the max RPM) and use 330 Hz as the authoritative result, because of the increased resolution of rectangular window functions.

Using the same [Doppler compensation](http://www.wolframalpha.com/input/?i...370Hz%2C+90mph) figures (90 MPH), we can derive that the source frequency was around 370 Hz. This translates to 7400 RPM.

## Comments

While I found this analysis interesting, I believe there are too many confounding factors to treat the results of this sound analysis as anything more than a very broad estimate. Even if I were to stand firm that my analysis were somehow more robust than the others done here, there's no guarantee that this is the redline (maximum) RPM of the new M3. It should be noted that the vast majority of turbocharged engines deliver maximum performance when they are shifted short of their redline RPM.

## Downloads

You can download a zip file containing all images, audio files, and Audacity source files, as well as the Markdown source file for this write-up in [this 2.6 MB zip file](download.zip).
EDIT: Removed the spectrogram attachment, because it makes the thread so wide. Just download the Audacity files and have a look for yourself.
__________________
His: 2019 R1250GS - Black
Hers: 2013 X3 28i - N20 Mineral Silver / Sand Beige / Premium, Tech
Past: 2013 ///M3 - Interlagos Blue Black M-DCT
Past: 2010 135i - TiAg Coral Red 6MT ///M-Sport

Last edited by bradleyland; 07-26-2013 at 04:33 PM.. Reason: Fuck that attachment
Appreciate 0
      07-26-2013, 04:21 PM   #83
Never Convicted
Lieutenant Colonel
United_States
1108
Rep
1,497
Posts

Drives: M4
Join Date: Dec 2012
Location: Charlotte NC

iTrader: (0)

Quote:
Yep that's peak power at around 7400-7600rpm....It could have a redline of 15000 rpm, if its not making power there why the hell would you spin it that high. that's like saying i have carbon ceramic brakes but i don't track my car... oh wait ...
But that still leaves the question...do I spend $5K on my bang & Olufsen sound system BEFORE I spend $8K on my Akrapovic exhaust, or after?
Appreciate 0
      07-26-2013, 05:41 PM   #84
RMB
Captain
RMB's Avatar
226
Rep
674
Posts

Drives: 2025 BMW M2 pending
Join Date: May 2012
Location: Virginia

iTrader: (0)

Garage List
Quote:
Originally Posted by Never Convicted View Post
But that still leaves the question...do I spend $5K on my bang & Olufsen sound system BEFORE I spend $8K on my Akrapovic exhaust, or after?
As a side note, I can't stand the upgraded sound system in my E92 M3. It isn't even in the same ball park as the Bang & Olufsen sound system in my previous 2011 Audi S4. I really hope BMW ties up loose ends with the F82 M4, not only in a performance category (usable torque without having to rev into the stratosphere and I am not lazy) but also in a luxury aspect (LED DRL's, nicer interior, better sound system, etc.) The M4 can't come fast enough for me. Like I have said before, I really like my M3, but I feel that I will love the M4. To each their own.
Appreciate 0
      07-26-2013, 07:11 PM   #85
swamp2
Lieutenant General
swamp2's Avatar
United_States
643
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by Mahlzeit View Post
So would a video of a 1M sitting in neutral with the tach showing steady state rpms be of use? If so, what rpm?
Not really.

The only rpm useful really is redline, its a known quantity. Of course that being said limiters are not perfect and I've heard of stock M3's getting to 8460 or so before cut off. I guess that's just another variable in the mix here.

Quote:
Originally Posted by DANMACINSD View Post
If it has the same 8 speed auto tranny, third gear no longer goes to 100. It did in my 335, but in my 535 the gears are a lot closer together.
M3 and M4 will not have automatic transmissions but rather dual clutch units.
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |
Appreciate 0
      07-26-2013, 08:35 PM   #86
swamp2
Lieutenant General
swamp2's Avatar
United_States
643
Rep
10,404
Posts

Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

iTrader: (3)

Quote:
Originally Posted by bradleyland View Post
My analysis shows a result that's closer to 7400 RPM. If you download my files, you can open the .aup files with Audacity (it's free). Running spectrum analysis on the audio just before the upshift always gives me values closer to 330 Hz, not 350-360 Hz. Not sure why exactly.

Full write-up: http://upload.bradlanders.com/bimmer...ound-analysis/
Completely agree.

Although the low pass filtering, fourier techniques and stereo vs. single channel stuff are all completely irrelevant, they just don't affect the answer. My error was recording through speakers rather than internally. Even trying to repeat my process showed considerable error. After switching to recording with Soundflower the shift burble was much more recognizeable visually in the traces. I also got much more recognizable peaks in the spectral results. I agree the observed frequency is right around 330 Hz perhaps with a worst case range of about 325-335 Hz. Thus with a Doppler correction from 90-97 mph this provides an rpm range of about 7250-7550 (with rounding to 50 rpm).

This is how science works - basic peer review. Thanks for keeping me on my toes. I will revise my OP in a way to not hide my shortcoming and I'll give you the credit due.

Thanks!
__________________
E92 M3 | Space Gray on Fox Red | M-DCT | CF Roof | RAC RG63 Wheels | Brembo 380mm BBK |
| Vorsteiner Ti Exhaust | Matte Black Grilles/Side Gills/Rear Emblem/Mirrors |
| Alekshop Back up Camera | GP Thunders | BMW Aluminum Pedals | Elite Angels |
| XPEL Full Front Wrap | Hardwired V1 | Interior Xenon Light Kit |

Last edited by swamp2; 07-26-2013 at 10:11 PM..
Appreciate 0
      07-26-2013, 09:27 PM   #87
solstice
Major General
5514
Rep
7,078
Posts

Drives: 2015 M3 6MT
Join Date: May 2013
Location: Seattle

iTrader: (0)

Quote:
Originally Posted by RMB View Post
As a side note, I can't stand the upgraded sound system in my E92 M3. It isn't even in the same ball park as the Bang & Olufsen sound system in my previous 2011 Audi S4. I really hope BMW ties up loose ends with the F82 M4, not only in a performance category (usable torque without having to rev into the stratosphere and I am not lazy) but also in a luxury aspect (LED DRL's, nicer interior, better sound system, etc.) The M4 can't come fast enough for me. Like I have said before, I really like my M3, but I feel that I will love the M4. To each their own.
To me it has really nothing to do with the abilities or shortcomings ( are there really any? ) of my E90 M3. It's more that I don't keep my car past original warranty and I like something a bit different after a couple of years.

That said I spent over 10h in the car the last 2 days, all in glorious weather and many on open backroads and I had such a pang of early separation anxiety. This car is bloody awesome, the way it connects into your soul and senses is like a runners high. The new car will need to be exceedingly good to just stay on level, which I think (hope?) it will be. Everything that counts in the current M3 is superb, suspension, steering, chassi, engine, sound, seats, steering wheel, controls, tranny and overall feel. It could be the best 4 door EVER made.
Appreciate 0
      07-26-2013, 09:30 PM   #88
540gone
Private
United_States
1
Rep
81
Posts

Drives: '13 X3 3.5, '14 640 GC
Join Date: Feb 2010
Location: Houston, TX & Santa Fe, NM

iTrader: (1)

Quote:
Originally Posted by swamp2 View Post
Completely agree.

The low pass filtering, fourier techniques and stereo vs. single channel stuff are all completely irrelevant, they just don't affect the answer. My error was recording through speakers rather than internally. Even trying to repeat my process showed considerable error. After switching to recording with Soundflower the shift burble was much more recognizeable visually in the traces. I also got much more recognizable peaks in the spectral results. I agree the observed frequency is right around 330 Hz perhaps with a worst case range of about 325-335 Hz. Thus with a Doppler correction from 90-97 mph this provides an rpm range of about 7250-7550 (with rounding to 50 rpm).

This is how science works - basic peer review. Thanks for keeping me on my toes. I will revise my OP in a way to not hide my shortcoming and I'll give you the credit due.

Thanks!
^^^ THIS is a class act and that which keeps this forum valuable to all the rest of us! I have a degree in engineering (from way back) and this sort of stuff makes my spine tingle.
Appreciate 0
Post Reply

Bookmarks

Tags
2014 bmw m3, 2014 m3, 2014 m3 forum, 2015 bmw m3, 2015 bmw m4, 2015 m3, 2015 m4, bmw f80, bmw f80 forum, bmw f80 forums, bmw f80 m3, bmw f80 m3 sedan, bmw f82, bmw f82 forum, bmw f82 forums, bmw f82 m3, bmw f82 m3 coupe, bmw f82 m3 forum, bmw f82 m4, bmw f82 m4 coupe, bmw f83, bmw f83 m3, bmw f83 m4, bmw m forum, bmw m forums, bmw m4, bmw m4 coupe, bmw m4 coupe forum, bmw m4 forum, bmw m4 forums, f80, f80 forum, f80 forums, f80 m3, f80 m3 forum, f80 m3 forums, f80 m3 sedan, f82, f82 coupe, f82 forum, f82 forums, f82 m3, f82 m3 coupe, f82 m3 forum, f82 m4, f82 m4 coupe, f82 m4 forum, f82 m4 forums, f83 m3, f83 m4, m forum, m forums, m3 f80, m3 f80 forum, m3 f80 forums, m4 forum, m4 forums

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:44 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST