|
Post Reply |
|
Thread Tools | Search this Thread |
10-04-2012, 10:42 AM | #1 |
Administrator
42926
Rep 21,310
Posts |
2014 BMW M3 / M4 to Gain About 100lb-ft More Torque While Targeting E46 M3 Weight
BIMMERPOST NEWS 2014 BMW M3 / M4 to Gain About 100lb-ft More Torque While Targeting E46 M3 Weight * M4 coupe render above is just a teaser for now. We spoke very recently at length to a trusty source within BMW who is familiar with the development of the upcoming F80 M3 sedan / F82 M4 coupe and we were able to confirm the following bits of news: HORSEPOWER / TORQUE Regarding power output, the previously estimated 450HP figure is an overestimate. Instead, expect the horsepower output to be in ballpark of the current E90/E92 M3. What will be increased greatly however, is the torque figure. The F80/F82's multi turbo inline 6 cylinder engine [recently exposed] will add approximately 100 lb-ft more torque over the current M3 (which outputs 295 lb-ft torque). This would put the new M3/M4 in the range of 395 lb-ft torque. There's nothing like forced induction for thrust! WEIGHT We were also glad to learn that all this extra torque will not go to waste. We've been reporting that the F80 M3 / F82 M4 will be lighter than the current M3, but how much lighter is what we all want to know. The great news is that the M engineers have targeted the E46 M3 weight in developing the F80/F82. The E46 M3's curb weight is 3,415 lb, while the current E90 M3 and E92 M3 weigh 3,726 and 3,704 pounds, respectively. This would represent an approximate 300 pound weight reduction; great news for BMW enthusiasts who bemoan the increasing weight of cars in general. The caveat to keep in mind however, is that curb weight is calculated based on the total weight of a vehicle with standard equipment, and with the ever growing list of standard equipment and technology in late model cars, don't be surprised or disappointed if you don't see exactly 300 pounds shaved. What's important is that the E46 M3 weight is being used as a target, which in any scenario, should result in significant weight reduction for the new M3 and M4. MORE RADICAL M3 This should come as no surprise for those who have been following our F80 M3 spy photos/videos. The F80 M3 sedan will feature a more drastic and aggressive look and styling from the F30 3 Series than the current E90 M3 does from the E90 3 Series. Our source said to think about how the 1M coupe looks compared to the 1 Series, and we believe it. The spy photos already show huge flared fenders, very aggressive front bumper styling, and a raised hood 'bump.' Check out how it may look in some of our preview renders. TIMING As for the market release timing - our source again reconfirmed the same schedule we have been reporting. The F80 M3 sedan will be introduced first and will not hit the market until early 2014. Expect the F82 M4 coupe in late 2014 - early 2015. We (just our own guess) think that it may receive a global launch just like the F30 3 Series, where the M3 will hit all markets worldwide simultaneously. SUMMARY To recap, here is an updated list of what we know about the F80/F82 so far:
Stay tuned for more information on the F80 M3 sedan and keep track of our ongoing coverage: http://www.bimmerpost.com/m3/f30m3/ |
10-04-2012, 12:51 PM | #4 |
First Lieutenant
11
Rep 380
Posts
Drives: 2008 e90 335i
Join Date: Jun 2011
Location: Texas, the United States of America, Planet Earth, Universe
|
Now that's a good new. Now THATS A GOOD NEWS!! If BMW really succeeds, I believe it will make me forgive the FWD BM... Nah, not quite.
|
Appreciate
0
|
10-04-2012, 12:59 PM | #7 |
General
675
Rep 26,876
Posts
Drives: 2-325 330 2-335 2-Z4 2-135 X5d
Join Date: Mar 2007
Location: Huntington Beach, CA
|
Can't wait!
|
Appreciate
0
|
10-04-2012, 01:00 PM | #8 |
Colonel
505
Rep 2,397
Posts |
That level of weight reduction is a big win. Also, the weight/power ratio would be slightly higher than the M5, which makes sense from a cannibalization/product risk standpoint. If that's the case, performance should be pretty close to the current gen M3 CRT and GTS.
Looks like automobile magazine blog posts (that everyone poo-poo'd on including 'quasi-insiders') turned out to be spot on: http://www.f30post.com/forums/showthread.php?t=749717 |
Appreciate
0
|
10-04-2012, 01:00 PM | #9 | |
Lieutenant Colonel
197
Rep 1,680
Posts |
Quote:
It they used both carbon fiber and fiber glass body panels, I really think that the price of the new M3/M4 will be close to the 6 series or even the M6. That would be one expensive M3/M4.
__________________
Hellaflush? All I could say is "effyo'flush","flushnuff", and Instead of 'illest', I'm calling it "faillest". It's just form over function nowadays... -END RANT |
|
Appreciate
0
|
10-04-2012, 01:01 PM | #10 |
General
21159
Rep 20,754
Posts
Drives: 2021 911 turbo
Join Date: Jan 2012
Location: Montreal
|
Same power...
That is really dissapointing . More torque if produced at lower RPMs does not translate in better acceleration. As was often debated on this forum, power to weight is the better indication of the acceleration capabilites of a drivetrain. Less weight is a very good thing. But shedding 200-300lb won't be enough to keep the M3 competitive IMO, as it will only improve power to weight by a mere 5.5%. This is the equivalent of increasing power on the E9X by 23hp... Maybe BMW will surprise us by underrating the F80/F82 as they have with all other recent engines. If 420 quoted translates in 450ish actual, then I'm happy . BTW, that render does look good . Last edited by CanAutM3; 10-04-2012 at 04:13 PM.. |
Appreciate
0
|
10-04-2012, 01:05 PM | #12 |
Major
387
Rep 1,204
Posts
Drives: 2021 M2C
Join Date: Jan 2009
Location: Ontario, Canada
|
I'm sure this will be a very tunable engine for much more power.
|
Appreciate
0
|
10-04-2012, 01:07 PM | #13 |
Colonel
454
Rep 2,973
Posts |
Too little.
With n54 engines able to produce numbers in that range without a lot of work, this does not seem compelling. We are talking somewhere in the neighborhood of 65-70 large for one that isn't even maxed out with options. Sorry, but the M5 got a real HP and torque bump. This isn't anything to write home about. Not impressed...... |
Appreciate
0
|
10-04-2012, 01:18 PM | #16 | |
Banned
1772
Rep 6,696
Posts
Drives: F30 340i
Join Date: Jan 2009
Location: San Diego,CA
|
Quote:
|
|
Appreciate
0
|
10-04-2012, 01:23 PM | #18 |
Brigadier General
1411
Rep 3,164
Posts |
when are they finally going to show us what this monster looks like?
__________________
|
Appreciate
0
|
10-04-2012, 01:32 PM | #20 |
Banned
61
Rep 908
Posts
Drives: em-funf
Join Date: Jun 2006
Location: SF Bay Area
iTrader: (0)
Garage List 2000 E39 M5 - current [0.00]
2007 E92 335i - SOLD [0.00] 1996 E36 M3-SOLD [0.00] 2000 E39 M5-SOLD [0.00] 2001 E46 M3-SOLD [0.00] 1995 E36 M3-SOLD [0.00] |
2007 E92 335i
curb weight: 3542lb (162lb less than current E92 M3) software tune only: 400chp/400cft.lb Price: 17-19k |
Appreciate
0
|
10-04-2012, 01:32 PM | #21 |
Major
429
Rep 1,461
Posts
Drives: 2018 M3CS
Join Date: Mar 2011
Location: Winnipeg
|
Sounds awesome! Less weight is always better. As for the power, seems like enough for me, but I expect with simple tunes and bolt ons it'll push a hundred more hp.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|