Driveshaft angle for 2019 M2 Competition

mjh113437 · 12-07-2023, 07:07 PM

Hello, I recently purchased a s55 engine/transmission from a 2019 M2 Competition and am putting it in a vintage Ford. I am working on fabricating the engine and transmission mounts and wanted to know if anyone can tell me what angle the driveshaft between the transmission and the rear end should be at? Thanks in advance for any help!

Track/S · 12-07-2023, 07:30 PM

As straight as possible, they barely have angle.

mjh113437 · 12-14-2023, 09:37 AM

Thank you very much!

hC1001 · 12-21-2023, 08:14 AM

I think you should try to follow the general guidelines for driveshaft angles. Try to be under 3 degrees with a minimum of 1/2 degree. Closer to 1/2 degree would be optimal.

12-07-2023, 07:07 PM	#1
mjh113437 Registered 0 Rep 3 Posts Drives: 2019 M2 Competition Join Date: Dec 2023 Location: North Carolina iTrader: (0)	Driveshaft angle for 2019 M2 Competition Hello, I recently purchased a s55 engine/transmission from a 2019 M2 Competition and am putting it in a vintage Ford. I am working on fabricating the engine and transmission mounts and wanted to know if anyone can tell me what angle the driveshaft between the transmission and the rear end should be at? Thanks in advance for any help!
	Appreciate 0 Tweet Quote

12-07-2023, 07:30 PM	#2
Track/S Major 1364 Rep 1,335 Posts Drives: M2C, M4 GTS Join Date: Oct 2019 Location: Around the world iTrader: (0)	As straight as possible, they barely have angle.
	Appreciate 0 Quote

12-14-2023, 09:37 AM	#3
mjh113437 Registered 0 Rep 3 Posts Drives: 2019 M2 Competition Join Date: Dec 2023 Location: North Carolina iTrader: (0)	Thank you very much!
	Appreciate 0 Quote

12-21-2023, 08:14 AM	#4
hC1001 Captain 591 Rep 988 Posts Drives: E36 M3, F80 M3 Join Date: Nov 2019 Location: Brooklyn, NY iTrader: (4)	I think you should try to follow the general guidelines for driveshaft angles. Try to be under 3 degrees with a minimum of 1/2 degree. Closer to 1/2 degree would be optimal.
	Appreciate 0 Quote