12-18-2023, 11:53 PM | #1 |
Private
13
Rep 63
Posts |
how to install downpipes without a lift
Hi, so I’ve watched a few videos and the only clear ones are on lifts so we can easily see what to do, but I don’t have access to a lift. So, I was wondering what the best way to do it is as far as where to put Jack stands or ramps, and if you worked on the downpipes from climbing under the side or front of the car. If I put Jack stands behind the front wheels then I can’t really lay hnder the car from the side, so is the best way really crawling to the downpipes from the front of the car? Thanks.
__________________
Travis
|
12-19-2023, 12:26 AM | #2 |
Captain
1082
Rep 890
Posts |
I did them on my ramps and jack stands! HOW TO INSTALL BMW F80 M3 AND F82 M4 DOWNPIPES (ARM DOWNPIPES)
https://youtu.be/sCTKGWVLmEw
__________________
https://youtube.com/user/Jbonly21
|
Appreciate
1
Drifter2090909.50 |
12-21-2023, 09:46 AM | #4 |
Second Lieutenant
83
Rep 282
Posts |
Did mine with a quickjack, basically a little higher than jack stands. Totally doable.
__________________
2015 M4 Cabriolet DCT
2011 135i Coupe (sold) 2014 M235i (sold) 2002 M5 (sold) |
Appreciate
0
|
12-21-2023, 10:29 AM | #5 |
Second Lieutenant
375
Rep 212
Posts |
Also did mine with a quick jack. Easily doable. You COULD do it with only the front end of the car lifted off the ground, but it will be much easier to have the car on 4 jack stands so you can lay under the car fully
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|