|
Post Reply |
|
Thread Tools | Search this Thread |
07-12-2020, 06:43 AM | #1 |
Captain
165
Rep 942
Posts |
AC Schnitzer RS (KW V3) coilover kit, with EDC delete, includes rear top mounts, 5 stud front top mounts.
Ready to bolt straight on to a facelift car, works well. DDC eliminator kit very straightforward, no errors on my car. I've got the height adjuster spanner & front adjuster knob. Kit supplied new by Rossiters in 2016, with 200mm rear springs. I bought it 2017, stuck it in the garage and only got around to fitting late 2019 One front lower adjuster seized, so both front dampers replaced via Rossiters August 2019. KW changed rear springs during production from 200mm to 220mm. 200mm leaves rear quite low, even at max height, so I replaced with 250mm spring, same spring rate, just doesn't use helper spring. Finally fitted to my car November 2019, used for 3,000 miles only. £1,200 Thanks for looking, any questions please ask.
__________________
2016 F80 M3
|
07-28-2020, 03:39 PM | #6 |
Captain
165
Rep 942
Posts |
I'm struggling a little; this was just before I had the ride height adjusted, so probably 1/3-1/2 up the adjuster
__________________
2016 F80 M3
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|