05-24-2020, 09:23 AM | #45 | ||
Lieutenant
215
Rep 472
Posts |
Quote:
|
||
Appreciate
0
|
05-24-2020, 09:48 AM | #46 |
New Member
12
Rep 18
Posts |
|
Appreciate
2
Tricki215.00 TractionControlDelete4588.50 |
02-01-2021, 08:23 AM | #47 |
New Member
8
Rep 21
Posts |
Will be installing the Turner hfc dp and AA midpipe on my dads F80 ZCP in a couple weeks I'll take some pics and video
|
Appreciate
1
TractionControlDelete4588.50 |
03-02-2021, 01:28 AM | #48 |
Enlisted Member
52
Rep 46
Posts |
Just did mine this weekend. I chose high flow catted dps because I think Turner is a reputable brand, and the smell of catless dps really annoys me. I also wanted the car to be louder.
I will try to update a long term review in the future Attached picture OEM vs Turner cells. OEM forsure has more cells. I read somewhere OEM is 400 cell, but not 100% sure if that is accurate. |
Appreciate
2
Wanted_M759.00 TractionControlDelete4588.50 |
03-02-2021, 05:11 PM | #49 |
Captain
759
Rep 950
Posts |
^^Does the MHD stage 2 turns off rear O2's?
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf |
Appreciate
0
|
03-02-2021, 09:14 PM | #50 |
Enlisted Member
52
Rep 46
Posts |
|
Appreciate
0
|
03-14-2021, 06:48 PM | #51 |
Enlisted Member
52
Rep 46
Posts |
|
Appreciate
2
Wanted_M759.00 TractionControlDelete4588.50 |
03-15-2021, 02:39 PM | #52 |
Captain
759
Rep 950
Posts |
Sounds good, let's see how catted DP's hold up overtime.
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf |
Appreciate
1
TractionControlDelete4588.50 |
03-28-2021, 06:00 PM | #54 |
New Member
8
Rep 21
Posts |
Turner HFC DP & AA mid installed
I'll start with this: I'm new to the DIY scene concerning performance parts install.
The AA Single mid install was child's play of course. The Turner HFC DP however... was really not bad so long has you have the right tools and whatnot. Jacking up the engine was nothing to write home about anyone can do it.... After the engine was lowered back into position the dp is sitting on the aluminum frame. Tried ten was from Sunday to position it so that the dp does not touch but no luck... if anyone has any ideas I'm all ears. (This could be an installation error?) When the car is running in park you can feel the vibration in the seat and steering wheel. I have read some things about the O2 or MAF causing problems after dp install and have not received a new map from alpine just yet but I'm assuming that will not do anything for the vibration... Anyway that's my experience thus far... might need to take it to a shop to see what can be done. |
Appreciate
1
TractionControlDelete4588.50 |
03-28-2021, 06:06 PM | #55 |
Lieutenant
465
Rep 502
Posts |
Idk if you've tried this yet but have you tried clocking (rotating) the dp so it's angled a little higher up?
|
Appreciate
0
|
03-28-2021, 07:53 PM | #56 |
Major General
5459
Rep 5,152
Posts |
When I do a DP swap it's important to keep the v-bands a little loose so the DPs can be tweaked, rotated or wiggled. Get the long pipe hanger bracket aligned right, then short pipe and flange. Keep the flange bolts loose too. After the exhaust gets hung tighten the v-bands fully, and finally the flange bolts. Sometimes adjusting an exhaust bracket can help move things enough to stop a vibration.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
1
TractionControlDelete4588.50 |
03-30-2021, 09:06 AM | #57 |
New Member
8
Rep 21
Posts |
Thanks for the advice guys.
I did try to leave everything loose then turn it one way or the other which was possible with then engine jacked up but wouldn't budge when the engine was lowered back down. As for the downpipe hanger I suppose that might work but the flex joint before the hanger so I'm thinking it will just flex as designed.?. I'm not sure what the secret is at this point might need to take it by a shop. |
Appreciate
0
|
06-21-2021, 09:40 AM | #59 | |
New Member
9
Rep 8
Posts |
Quote:
|
|
Appreciate
0
|
06-21-2021, 09:55 AM | #60 |
Lieutenant
620
Rep 498
Posts
Drives: '18 F80 6MT / '16 F31
Join Date: May 2020
Location: Bend, OR
|
It would be pretty brilliant for a company like turner to give people a real interchangable downpipe module.
Provide a high-flow cat, but also a straight section for track days, and lower the cat as much as you can (i know it can't be too far down) so you don't have to fuck with the subframe.
__________________
|
Appreciate
0
|
10-08-2022, 10:51 AM | #62 |
Private First Class
43
Rep 152
Posts |
Also in the market for catted DP. I want some more flow but No smell is my biggest concern.
Which ones are the best ones out there ? Currently running AA Equal length Mid pipe |
Appreciate
0
|
10-08-2022, 05:17 PM | #63 |
Captain
759
Rep 950
Posts |
I did ARM dp's, left mid section intact with cats, Dinan x-pipe and soon will add rear section. I only smell fumes on cold start up as most cars do but once mid section cats are warm/hot, I can hardly smell anything. At least I feel like I'm doing something for environment
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf |
Appreciate
0
|
10-09-2022, 05:23 AM | #64 |
First Lieutenant
165
Rep 358
Posts |
|
Appreciate
0
|
10-09-2022, 04:29 PM | #65 |
Captain
759
Rep 950
Posts |
Yes resonated, no fitment issues or rattles. Make sure you use new hardware and gaskets.
Some rasp under full throttle/high rpm but not obnoxious and probably 70-80% of that raw smell of fumes are absent due to mid-section cats but depends on your olfactory system lol. Now in a garage environment you will smell the corn husk for sure.
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf Last edited by Wanted_M; 10-09-2022 at 04:35 PM.. |
Appreciate
1
TractionControlDelete4588.50 |
10-11-2022, 04:14 PM | #66 | |
Major General
3273
Rep 6,723
Posts |
Quote:
|
|
Post Reply |
Bookmarks |
|
|