09-19-2016, 01:53 PM | #23 | |
Lieutenant
357
Rep 435
Posts |
Quote:
The setup goes, stock inlet, carbon piece, silicone, metal union, then the filter. Hope that clears it up, i'll get you more pictures here this/next week. -R |
|
Appreciate
0
|
09-19-2016, 02:47 PM | #24 |
Captain
707
Rep 886
Posts |
Interested, but your price point is still pretty high for what we are getting. You will definitely sell a lot more of these at a lower price point...making up the difference in cost with the additional volume sold.
For comparison...I was just researching some performace packages for the Grand Sport corvette, and you can literally get 2 headers, an x-pipe, and an intake for $1800!!
__________________
2015 M3 - AW 6Spd w/ CCB
MCS 2WR Dampers, Spec Twin Disk Clutch, MaxPSI CH, F80Paul Ethanol Tune, 3.5in DPs |
Appreciate
0
|
09-19-2016, 02:54 PM | #25 | |
Lieutenant
357
Rep 435
Posts |
Quote:
Comparing a corvette to a M3/4 isn't even a fair comparison in my opinion. When stuff breaks on a m3/4 my company is liable, so everything has to be taken into account. The time it took to be able to develop a product, tools necessary, R&D time, actually making the product, the risk, offering support, products that might be faulty. The list is really long. My company also doesn't have any interest in selling thousands, id rather sell 100 and know all 100 buyers are 100% happy. -R |
|
Appreciate
0
|
09-20-2016, 11:02 PM | #27 |
In The Rain
8174
Rep 6,259
Posts
Drives: '24 GT4RS, '24 Macan GTS
Join Date: Mar 2015
Location: SoCal
|
Is there any videos of the intake as the car is driving?
It's hard to get an idea of the intake noise from just the dyno video.
__________________
'24 Porsche Cayman GT4RS Arctic Grey "Alice"
'24 Porsche Macan GTS Dolomite Silver "Gina" |
Appreciate
0
|
09-21-2016, 04:46 PM | #28 |
Lieutenant
357
Rep 435
Posts |
|
10-18-2016, 12:49 PM | #33 |
Lieutenant
357
Rep 435
Posts |
|
Appreciate
0
|
11-01-2016, 06:02 PM | #36 | |
Brigadier General
2163
Rep 4,107
Posts |
Quote:
Last edited by LOW4LYF; 11-01-2016 at 06:33 PM.. |
|
Appreciate
0
|
11-01-2016, 09:18 PM | #38 |
Lieutenant
357
Rep 435
Posts |
Pleasure talking to you and we appreciate the pictures! Your car looks great!
Install is very straight forward, no cutting of the vehicle at all, 100% reversible. You need to remove the front grills and the stock intakes. Everything else you need is provided. Thanks -R |
Appreciate
0
|
11-05-2016, 10:59 PM | #39 |
Second Lieutenant
38
Rep 259
Posts
Drives: BMW F82 M4
Join Date: May 2015
Location: Miami FL
|
|
Appreciate
0
|
11-06-2016, 01:27 AM | #40 | |
Major
209
Rep 1,252
Posts |
Quote:
__________________
Docrace 6266
|
|
Appreciate
0
|
11-09-2016, 09:57 AM | #42 | |
Lieutenant
357
Rep 435
Posts |
Currently no plans, potentially in the future if there is enough demand.
Quote:
Thanks -R |
|
Appreciate
1
Pure Turbos563.00 |
11-13-2016, 08:30 PM | #43 |
New Member
4
Rep 7
Posts
Drives: 2015 F82 M4 & E60 535xi M pack
Join Date: Sep 2016
Location: Columbus, OH
|
Since my car was used for the development of these intakes, I feel like I should throw in my opinion for what it's worth along with the experience with these intakes.
I actually even drove around with prototype plastic intakes for a little bit and saw an instant increase in power and the sound was great... That was until I got the real finished product. Sound is amazing now and the power is even more noticeable (driving in heat with plastic intakes might have something to do with it). Since a lot of you are worried about the rain factor, I can tell you that I've drive through some messed up conditions where I couldn't even see through rain. Nothing happened to my car. TBH I was worried at first too, I even considered ordering water repellent intake bags, but for some reason I didn't.. As far as the installation process goes. I am no mechanic, but was able to install these intakes with the help of my other friend (non mechanic either ) in around 45 minutes. Hardest part being taking out the kidney grills with 3000 clips per grill.. That was the hardest part. It might take you longer since you will have to take off the stock intake boxes first, I just had to take off prototypes and put the Carbon Fiber ones in. However, I was the one who took off the stock intakes too, and that wasn't hard either. Long story short, I'm more than happy with the product. Sound, looks, power that was opened up to my M4 is awesome for the money. If you have any questions, hit me up! |
Appreciate
2
Sales@RKautowerks357.00 lchdezm338.00 |
11-13-2016, 11:43 PM | #44 |
#LSBM3
1420
Rep 1,973
Posts
Drives: 2016 BMW M3
Join Date: Feb 2015
Location: Oregon / Florida
iTrader: (4)
Garage List 1984 BMW R65 [0.00]
2020 Ford F-150 XLT ... [0.00] 2003 Mitsubishi Evo ... [0.00] 2016 M3 Competition ... [10.00] |
Love the design process, thought and engineering that went into this. Carbon looks great too. Personally I'd love a 3D printed/composite plastic version at a lower price point.
__________________
/// M3 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|