Settings for DVD-in-motion with iDrive 5 / HU_NBT2?

[mstevens]

Once I finally figured out that the available cheat sheets give settings for earlier ECU versions for owners manual while driving, it occurred to me that the reason I haven't been able to get DVD while driving to work might be a similar issue.

Can anyone confirm working settings to enable DVD in motion (which I presume also involves enabling general video in motion) in the newest F83 M4's that use iDrive 5 and the HU_NBT2 ECU?

[Almaretto]

Originally Posted by mstevens

Once I finally figured out that the available cheat sheets give settings for earlier ECU versions for owners manual while driving, it occurred to me that the reason I haven't been able to get DVD while driving to work might be a similar issue.

Can anyone confirms working settings to enable DVD in motion (which I presume also involves enabling general video in motion) in the newest F83 M4's that use iDrive 5 and the HU_NBT2 ECU?

DVD vs VIM, the codes are the same. Enabling Video playback and all codecs is separate.

ID4 Any Speed
ID5 Up to 63 kph

[mstevens]

Originally Posted by Almaretto

DVD vs VIM, the codes are the same. Enabling Video playback and all codecs is separate.

ID4 Any Speed
ID5 Up to 63 kph

Ooooo.... Kkkkk....

So, given that the codes I've found in cheat sheets and in Launcher appear not to work in my car, any ideas how to code this in a car with ID5?

In HU_NBT2 I've coded:

3000 SPEEDLOCK_X_KMH_MAX werte = FF
3000 SPEEDLOCK_X_KMH_MIN werte = FF
3000 VIDEO_HANDBRAKE nicht_aktiv
3000 VIDEO_FRONT_LOCKED nicht_aktiv
3000 VIDEO_SPEEDLOCK_CONDITION none

However, the moment I move at any speed, the warning screen pops up.

Are you saying that in ID5 it's only possible to enable viewing of DVD video at speeds up to 63 kph / 39 mph, or something else?

[Almaretto]

Originally Posted by mstevens

Ooooo.... Kkkkk....

So, given that the codes I've found in cheat sheets and in Launcher appear not to work in my car, any ideas how to code this in a car with ID5?

In HU_NBT2 I've coded:

3000 SPEEDLOCK_X_KMH_MAX werte = FF
3000 SPEEDLOCK_X_KMH_MIN werte = FF
3000 VIDEO_HANDBRAKE nicht_aktiv
3000 VIDEO_FRONT_LOCKED nicht_aktiv
3000 VIDEO_SPEEDLOCK_CONDITION none

However, the moment I move at any speed, the warning screen pops up.

Are you saying that in ID5 it's only possible to enable viewing of DVD video at speeds up to 63 kph / 39 mph, or something else?

That is exactly what I am saying. The Cheat Codes I have for HU_NBT2 are separate and labeled for ID4 vs ID5.





3F = Hex for 63

[AtlantisF80]

Originally Posted by Almaretto

That is exactly what I am saying. The Cheat Codes I have for HU_NBT2 are separate and labeled for ID4 vs ID5.





3F = Hex for 63

Almaretto where did you get this spreadsheet that shows the OLD ("original") and current("NEW") values? That is so useful to backtrack and reverse settings to the original.

[mstevens]

Originally Posted by Eloo818

Almaretto where did you get this spreadsheet that shows the OLD ("original") and current("NEW") values? That is so useful to backtrack and reverse settings to the original.

Those look like screenshots from the Cheat Codes section of Esys Launcher.

[Almaretto]

Originally Posted by Eloo818

Almaretto where did you get this spreadsheet that shows the OLD ("original") and current("NEW") values? That is so useful to backtrack and reverse settings to the original.

Those are Cheat Codes written in HTML for E-sys Launcher. There is no spreadsheet.

[mstevens]

Originally Posted by Almaretto

The Cheat Codes I have for HU_NBT2 are separate and labeled for ID4 vs ID5.

So how do the rest of us get those Cheat Codes?

My installations of Launcher Pro 2.6.3.138 and Launcher Premium 2.6.2.124 do not include the two different "Enables Video in Motion (VIM) - only ID4 (Any Speed)" and "Enables Video in Motion (VIM) - only 1(sic)D5 (Up to 63 kph)" sections. I have only "Enables Video in Motion - only ID4".

[Almaretto]

Originally Posted by mstevens

So how do the rest of us get those Cheat Codes?

My installations of Launcher Pro 2.6.3.138 and Launcher Premium 2.6.2.124 do not include the two different "Enables Video in Motion (VIM) - only ID4 (Any Speed)" and "Enables Video in Motion (VIM) - only 1(sic)D5 (Up to 63 kph)" sections. I have only "Enables Video in Motion - only ID4".

You sync with Github or download manually as well as wait for authors to upload changes. My shared version is 2320 lines compared to my current offline version with 5201 lines. The ladder has additional tested, untested, and still testing codes.

PHP Code:

<code description="Enables Video in Motion (VIM) - only ID4 (Any Speed)">
            <group id="3000">
                <function start="5" end="5" comment="VIDEO_HANDBRAKE" mask="00000100b">nicht_aktiv</function> 
                <function start="5" end="5" comment="VIDEO_FRONT_LOCKED" mask="00010000b">nicht_aktiv</function>
                <function start="2" end="2" comment="VIDEO_SPEEDLOCK_CONDITION" mask="00000111b">none</function>
                <function start="146" end="146" comment="SPEEDLOCK_SPEEDVALUE_MIN" mask="00011111b">nicht_aktiv</function>
                <function start="147" end="147" comment="SPEEDLOCK_SPEEDVALUE_MAX" mask="00111111b">nicht_aktiv</function>
            </group>
            <group id="3006">
                <function start="25" end="25" comment="SPEEDLOCK_X_KMH_MIN" mask="11111111b">FF</function>
                <function start="26" end="26" comment="SPEEDLOCK_X_KMH_MAX" mask="11111111b">FF</function>
            </group>
        </code>
    <code description="Enables Video in Motion (VIM) - only 1D5 (Up to 63 kph)">
            <group id="3000">
                <function start="5" end="5" comment="VIDEO_HANDBRAKE" mask="00000100b">nicht_aktiv</function> 
                <function start="5" end="5" comment="VIDEO_FRONT_LOCKED" mask="00010000b">nicht_aktiv</function>
                <function start="2" end="2" comment="VIDEO_SPEEDLOCK_CONDITION" mask="00000111b">none</function>
                <function start="146" end="146" comment="SPEEDLOCK_SPEEDVALUE_MIN" mask="00011111b">1F</function>
                <function start="147" end="147" comment="SPEEDLOCK_SPEEDVALUE_MAX" mask="00111111b">3F</function>
            </group>
            <group id="3006">
                <function start="25" end="25" comment="SPEEDLOCK_X_KMH_MIN" mask="11111111b">FF</function>
                <function start="26" end="26" comment="SPEEDLOCK_X_KMH_MAX" mask="11111111b">FF</function>
            </group>
        </code> 


[mstevens]

Originally Posted by Almaretto

You sync with Github or download manually

So they're not available. That's fine, but why make a point of referring to things such as "separate and labeled" Cheat Codes when nobody can see or use them anyway?

[Almaretto]

Originally Posted by mstevens

So they're not available. That's fine, but why make a point of referring to things such as "separate and labeled" Cheat Codes when nobody can see or use them anyway?

You cannot see the link to Git or the above posted codes in post#4 and #9?

[mstevens]

Originally Posted by Almaretto

You cannot see the link to Git or the above posted codes in post#4 and #9?

I've searched through each contributor's area at the Git repository and can't find anything that looks like the Cheat Codes you posted. I'm not where I can do screenshots, but I see

bmw-f/cheats/
Latest commit a27378f 2 days ago @botho botho MPM_LOGO …
..
Botho.xml MPM_LOGO 2 days ago
FDLCodes.xml initial commit a year ago
SergAA.xml SergAA cheats 3 months ago
SergeAA.xml initial commit a year ago
TMD29.xml initial commit a year ago
aboulfad.xml Update aboulfad.xml 3 months ago
aknight720.xml initial commit a year ago
dmnc02.xml initial commit a year ago
otakar.xml initial commit a year ago
packetpilot.xml readme edit, working seatbelt chime removal 2 months ago
ruben_17non.xml Add files via upload 2 months ago
tutuianu_daniel.xml

I looked through each of the linked xml's then searched them for the string "63 kph". I also searched for "1D5" since that seemed as if it might be unique.

Which one is yours?

[Almaretto]

Originally Posted by mstevens

I've searched through each contributor's area at the Git repository and can't find anything that looks like the Cheat Codes you posted. I'm not where I can do screenshots, but I see

I looked through each of the linked xml's then searched them for the string "63 kph". I also searched for "1D5" since that seemed as if it might be unique.

Which one is yours?

Mine were sent directly to Tokenmaster and included in 2.6.x release. I uploaded to Git an update, but for some reason they have not been posted yet.
My ID5 settings are pictured above, as described, in three forms (Cheat Codes lists, cheat codes reviewed, and HTML).

[SoundQ2]

Posting a bit late for this but I have a 18 M4 (F83) with the ID5. I used the Bimmercode app and OBDII bluetooth thing. I have video in motion past 100Km so I don't know what issue he's having.
I'm trying to figure out how to post a pic or excel thing on here, of my settings.

My issue is I can get the video in motion but I CANNOT do the Owners manual in motion...with these settings.

I think I attached the picture...

[shawnsheridan]

Originally Posted by SoundQ2

Posting a bit late for this but I have a 18 M4 (F83) with the ID5. I used the Bimmercode app and OBDII bluetooth thing. I have video in motion past 100Km so I don't know what issue he's having.
I'm trying to figure out how to post a pic or excel thing on here, of my settings.

My issue is I can get the video in motion but I CANNOT do the Owners manual in motion...with these settings.Attachment 3381721

I think I attached the picture...

Asked and answered:

https://f80.bimmerpost.com/forums/sh...&postcount=964

[SoundQ2]

Thanks for that info...I'll look for all IBA speedlocks. I must have missed one.