Top 10 Codings for M4 Coupe or Convertible

BuLoOoSki · 09-19-2015, 11:17 PM

Quote:

Originally Posted by vstM3

Please share the coding details on #4, this is the first time i see somebody crack the code

Here you go vstM3 These are for the LED headlights

TMS 41 Module:
Disable Left LED Amber Sidemarker:
3005 Standlicht Modus 1: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00
3005 Standlicht Modus 2: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00

TMS 42 Module:
Disable Right LED Amber Sidemarker:
3005 Standlicht Modus 1: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00
3005 Standlicht Modus 2: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00

vstM3 · 09-20-2015, 05:08 PM

Quote:

Originally Posted by BuLoOoSki

Quote:

Originally Posted by vstM3

Please share the coding details on #4, this is the first time i see somebody crack the code

Here you go vstM3 These are for the LED headlights

TMS 41 Module:
Disable Left LED Amber Sidemarker:
3005 Standlicht Modus 1: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00
3005 Standlicht Modus 2: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00

TMS 42 Module:
Disable Right LED Amber Sidemarker:
3005 Standlicht Modus 1: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00
3005 Standlicht Modus 2: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00

Great, thanks

bigsid05 · 09-20-2015, 05:31 PM

Quote:

Originally Posted by dmnc02

The key issue is the accent lighting built into the doors. On light-color leather (e.g., SS), this is clearly visible, but on black leather it is very subtle indeed. Once you decouple the two settings, the Ambient Lighting becomes brighter. You then adjust the brightness of the Instrument Cluster with the controller next to the light switch and the brightness of the Ambient Lighting in iDrive.

Is the iDrive option normally greyed out? I never coded this in but I can adjust the lighting levels in my car using the iDrive setting, assuming this refers to the lighting in the doors and rear armrest areas. Was it somehow already setup on my car?

I cranked up the "classic" (red) lighting since I think it looks great on the SO interior.

dmnc02 · 09-20-2015, 05:45 PM

Quote:

Originally Posted by bigsid05

Is the iDrive option normally greyed out? I never coded this in but I can adjust the lighting levels in my car using the iDrive setting, assuming this refers to the lighting in the doors and rear armrest areas. Was it somehow already setup on my car?

I cranked up the "classic" (red) lighting since I think it looks great on the SO interior.

You can still change the accent lighting in iDrive without the coding, but you have a more limited range. If you have maxed out the iDrive setting, then you might want to try the coding. Otherwise, there is no need.

bigsid05 · 09-20-2015, 08:38 PM

Quote:

Originally Posted by dmnc02

You can still change the accent lighting in iDrive without the coding, but you have a more limited range. If you have maxed out the iDrive setting, then you might want to try the coding. Otherwise, there is no need.

Ah, got it. Thanks for clarifying!

G4BR13L · 11-22-2015, 03:31 AM

It would be nice if someone with the knowledge/experience on coding setup a blog, website, or something where we can search for what we want to code so that we get step-by-step instructions.

I would like to code the following and I would like some help, I have already the software and the cable (thx Shawnseridan!):

Enable video/DVD in motion
Enable camera use while driving
Disable legal disclaimers
Transfer phone's ringtone to car
Open/Close windows with key FOB or Comfort Access
Fold/Unfold mirrors with key FOB or Comfort Access
Auto-unlock doors when car turned off
Enable memory for auto start/stop
High beam assistant on by default
Enable accurate digital speedometer
Enable real/time digital fuel consumption
Enable LED Door Handles Illumination when in Reverse
Increase the brightness of ambiance lighting
Disable auto start/stop

I would like to give it a try with the Fold/Unfold mirrors, I have the comfort access.

aboulfad · 11-22-2015, 07:16 AM

G4BR13L , this may not answer your question, but just in case you are not aware of these useful threads:

http://f80.bimmerpost.com/forums/sho....php?t=1125375
http://f80.bimmerpost.com/forums/sho....php?t=1180683
http://f80.bimmerpost.com/forums/sho....php?t=1040273

And this functionality

although we're a small community, there's a bunch here that are really nice and helpful that'd give you a hand if you put in some effort in learning. But i agree a sticky would be useful as searching is sometimes difficult, but part of the fun!

AlbeeM · 11-24-2015, 02:11 PM

does anyone know if there's a code to control the exhaust values opening and closing?

tom @ eas · 11-24-2015, 02:19 PM

Quote:

Originally Posted by AlbeeM

does anyone know if there's a code to control the exhaust values opening and closing?

Doesn't exist, requires an aftermarket controller like the Macht Schnell EVC module.

G4BR13L · 11-24-2015, 02:24 PM

Quote:

Originally Posted by tom @ eas

Doesn't exist, requires an aftermarket controller like the Macht Schnell EVC module.

Which by the ways works like a charm! I have it set so that each time the car is started with the valves closed because it is loud at 5 AM :-) and with a simple 1 sec touch on the BC button I can open the valves. And this can be done while driving around at any speed and I especially love the combination with muting ASD when the valves are closed

AlbeeM · 11-24-2015, 02:29 PM

Quote:

Originally Posted by G4BR13L

Which by the ways works like a charm! I have it set so that each time the car is started with the valves closed because it is loud at 5 AM :-) and with a simple 1 sec touch on the BC button I can open the valves. And this can be done while driving around at any speed and I especially love the combination with muting ASD when the valves are closed

I guess it's time to start looking into an exhaust then

Thanks G4BR13L tom @ eas

G4BR13L · 11-24-2015, 02:32 PM

Quote:

Originally Posted by AlbeeM

I guess it's time to start looking into from exhaust then

Thanks G4BR13L @tom @ eas

I am waiting for the "new" MPE. The dealer was going to send me a price list of the new M Performance parts that will be available as of January.

tom @ eas · 11-24-2015, 02:43 PM

Quote:

Originally Posted by G4BR13L

Which by the ways works like a charm! I have it set so that each time the car is started with the valves closed because it is loud at 5 AM :-) and with a simple 1 sec touch on the BC button I can open the valves. And this can be done while driving around at any speed and I especially love the combination with muting ASD when the valves are closed

Appreciate the feedback.

Most everyone that has the MS EVC module has been thrilled with the features and ease of use.

G4BR13L · 11-25-2015, 06:21 AM

Quote:

Originally Posted by BuLoOoSki

Here you go vstM3 These are for the LED headlights

TMS 41 Module:
Disable Left LED Amber Sidemarker:
3005 Standlicht Modus 1: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00
3005 Standlicht Modus 2: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00

TMS 42 Module:
Disable Right LED Amber Sidemarker:
3005 Standlicht Modus 1: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00
3005 Standlicht Modus 2: Change werte = 00, 03, 00, 00, 00, 03, 00, 00, 64, 03, 00, 00, 2B, 04, 00, 00

Instead of 2B I had the value 2E. So I changed it also to 2B. The amber lights are not running but now I don't know if I unwillingly also changed something else by changing it from 2E to 2B. Anybody know what the difference is between 2B and 2E? My car is an European F82 (sold in Belgium).

And they are also still turned on with the "welcome lights", the lights when you lock/unlock the car but they turn off once you start the engine.

dmnc02 · 11-25-2015, 07:36 AM

Quote:

Originally Posted by G4BR13L

Instead of 2B I had the value 2E. So I changed it also to 2B. The amber lights are not running but now I don't know if I unwillingly also changed something else by changing it from 2E to 2B. Anybody know what the difference is between 2B and 2E? My car is an European F82 (sold in Belgium).

That byte determines the brightness of the LED rings: 2E (46%) is the current setting, although 2B (43%) is indistinguishable from it.

Quote:

And they are also still turned on with the "welcome lights", the lights when you lock/unlock the car but they turn off once you start the engine.

See this post.

G4BR13L · 11-25-2015, 08:40 AM

Quote:

Originally Posted by dmnc02

That byte determines the brightness of the LED rings: 2E (46%) is the current setting, although 2B (43%) is indistinguishable from it.

See this post.

Does it mean that the brightness of the LED rings can be increased to 64 (100%)?

G4BR13L · 11-25-2015, 08:50 AM

When I first picked up the car the seat moved automatically to the back position that allowed easy entry. Is this a configuration or can it be coded? I cannot find this option in iDrive.

dmnc02 · 11-25-2015, 08:51 AM

Quote:

Originally Posted by G4BR13L

Does it mean that the brightness of the LED rings can be increased to 64 (100%)?

Yes, it can. Keep in mind that what we are discussing is the brightness of the LED rings when used as position lights, i.e., when the low beams are on. The brightness when used as DRLs is already set at 100% (64 hex).

Another German member increased them to 4B (75%) to preserve some differentiation between position lights and DRLs, as required by law: see this post.

G4BR13L · 11-25-2015, 09:18 AM

Quote:

Originally Posted by dmnc02

Yes, it can. Keep in mind that what we are discussing is the brightness of the LED rings when used as position lights, i.e., when the low beams are on. The brightness when used as DRLs is already set at 100% (64 hex).

Another German member increased them to 4B (75%) to preserve some differentiation between position lights and DRLs, as required by law: see this post.

After setting the werte for the WELCOME LIGHT 1 in the TMS module, I noticed that the amber light is still on, on the right side but it is disabled on the left side. There is also a WELCOME LIGHT 2, 3 and 4.

Did I miss something?

dmnc02 · 11-25-2015, 09:28 AM

Quote:

Originally Posted by G4BR13L

After setting the werte for the WELCOME LIGHT 1 in the TMS module, I noticed that the amber light is still on, on the right side but it is disabled on the left side. There is also a WELCOME LIGHT 2, 3 and 4.

Did I miss something?

There are two TMS: TMS [41] is for the driver side and TMS [42] is for the passenger side. It looks like you skipped one. Do not change WELCOME LIGHT 2, 3 and 4.

G4BR13L · 11-25-2015, 10:19 AM

Quote:

Originally Posted by dmnc02

There are two TMS: TMS [41] is for the driver side and TMS [42] is for the passenger side. It looks like you skipped one. Do not change WELCOME LIGHT 2, 3 and 4.

That did the trick. Thx!

marcospoffo · 05-12-2016, 06:11 PM

I want to encode, Roof to open the key. Can you tell me the code?

3 - Roof up & down via Fob and CA

Quote:

Originally Posted by YMB_M4_j2

Here is mine..not in any specific order

1 - Mirror Fold/Unfold with Fob & CA
2 - Disclaimers all turned off
3 - Windows/Roof up & down via Fob and CA
4 - DVD in Motion
5 - Turn Car off when opening the door(No 2 presses of Start button)
6 - Dynamic Brake Lights - Euro Version
7 - Auto Headlight sensitivity - they came on way too often before
8 - Auto Dimmer Mirror Sensitivity - Mirrors didnt dim enough since i tinted my windows.
9 - Remove Flicker from LED bulbs installed in the rear turn signals, Reverse lights
10- Rear Fogs to blind tailgating, high beaming assholes.

11-22-2015, 03:31 AM	#116
G4BR13L Major 523 Rep 1,105 Posts Drives: BMW M4 Join Date: Aug 2015 Location: Hasselt (Belgium) iTrader: (0)	It would be nice if someone with the knowledge/experience on coding setup a blog, website, or something where we can search for what we want to code so that we get step-by-step instructions. I would like to code the following and I would like some help, I have already the software and the cable (thx Shawnseridan!): Enable video/DVD in motion Enable camera use while driving Disable legal disclaimers Transfer phone's ringtone to car Open/Close windows with key FOB or Comfort Access Fold/Unfold mirrors with key FOB or Comfort Access Auto-unlock doors when car turned off Enable memory for auto start/stop High beam assistant on by default Enable accurate digital speedometer Enable real/time digital fuel consumption Enable LED Door Handles Illumination when in Reverse Increase the brightness of ambiance lighting Disable auto start/stop I would like to give it a try with the Fold/Unfold mirrors, I have the comfort access. Last edited by G4BR13L; 11-22-2015 at 03:39 AM..
	Appreciate 0 Quote

11-22-2015, 07:16 AM	#117
aboulfad Brigadier General 1593 Rep 3,945 Posts Drives: 2015 M4 MG/SO Join Date: Mar 2014 Location: MTL, QC iTrader: (0) Garage List 2015 BMW M4 [10.00]	G4BR13L , this may not answer your question, but just in case you are not aware of these useful threads: http://f80.bimmerpost.com/forums/sho....php?t=1125375 http://f80.bimmerpost.com/forums/sho....php?t=1180683 http://f80.bimmerpost.com/forums/sho....php?t=1040273 And this functionality although we're a small community, there's a bunch here that are really nice and helpful that'd give you a hand if you put in some effort in learning. But i agree a sticky would be useful as searching is sometimes difficult, but part of the fun!
	Appreciate 1 Quote

11-24-2015, 02:11 PM	#118
AlbeeM Private 32 Rep 81 Posts Drives: BMW M4 2016 Join Date: Oct 2015 Location: Bay Area, CA iTrader: (0) Garage List 2016 BMW M4 [0.00]	does anyone know if there's a code to control the exhaust values opening and closing?
	Appreciate 0 Quote

11-25-2015, 08:50 AM	#127
G4BR13L Major 523 Rep 1,105 Posts Drives: BMW M4 Join Date: Aug 2015 Location: Hasselt (Belgium) iTrader: (0)	When I first picked up the car the seat moved automatically to the back position that allowed easy entry. Is this a configuration or can it be coded? I cannot find this option in iDrive.
	Appreciate 0 Quote