|
Post Reply |
|
Thread Tools | Search this Thread |
11-10-2021, 04:48 PM | #1 |
Racecar Driver
1273
Rep 1,925
Posts
Drives: BMW M4
Join Date: Mar 2019
Location: Beverly Hills, California
|
Need advice - F82 scrapes in the center while leaving only
So I recently bought a new property and it is in a gated community with an HOA. I am currently scraping in the center of my car when I leave the complex. It's sounds worse than it probably is because I'm scraping on my exhaust so it literally sounds like scraping metal on concrete. I tried different angles while leaving and so far no dice.
Tried to deal with the HOA and it's going no where. If it wasn't a shared zone I would demolish that drive way and redo the angle...but it's not the case. I am mere millimeters off to not scrape anymore. Like 1-2mm. I'm on stock suspension with 255/35 R19 and 275/35 R19 MPS4S. Sinch stock diameters are 26" for the front and 26.6" in the rear, if I go 265 / 35 R19 (26.3") and 285/35 R19 (26.9") in MPS4S do you think this would give me the 1-2 mm clearance? Or should I go up even more to 275 and 295? Thanks in advance!
__________________
N1rve
2019 BMW ///M4 - Alpine White | Sakhir Orange/Black Leather | M-DCT | Executive Package | 19" Black 437M Wheels | Carbon Fiber Trim | Sunroof | Active Blind Spot | Heated Steering Wheel | Adaptive M Suspension |
11-11-2021, 04:52 PM | #2 |
Major
1326
Rep 1,481
Posts |
Any photos of the pyramid driveway? I don't think 275/35 295/35 would look good on OEM 19x9 19x10 wheels (too bulbous) but I assume that would definitely take care of your issue if it truly is 1-2mm only. At the same time, super angulation should take care of that 1-2mm but I don't have a visual to see if you are being blocked off from going at a ridiculous angle.
I scrape daily going out of my driveway as well and I can minimize the scraping by going as slow as possible so the suspension doesn't compress at all - literally slow creeping at 45 degrees to get out. I don't share my driveway so I can be that turtle however. if your tires are worn and the OEM PSS* I wouldn't be surprised if new PS4S in the same size made you clear that (basing off what I read). |
Appreciate
0
|
11-11-2021, 05:28 PM | #3 |
Captain
1130
Rep 828
Posts |
How can you possibly scrape on stock suspension? Post a pic so we can see. I scrape ever so slightly leaving my garage but it's sunken and my car is low on coilovers.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|