Can 18" 513m wheel clear BBK?

[XKxRome0ox]

Trying to get some info
Can the 513m front wheel 18x9 et29
Accommodate bbk with 380mm rotors?

I don't own a f80 so I don't know the stock brake specs
I put the 513m on a e90 m3
And trying to install stoptech ST60 front brake with 380mm rotors

[XKxRome0ox]

answer = they fit
in the process i learned that the stock f80/82 brake rotors are 380mm in the front

[bimmerboyE92]

How much breathing room is there between caliper and inside barrel of rim? 1/4”? Or not even?

[XKxRome0ox]

Originally Posted by bimmerboyE92

How much breathing room is there between caliper and inside barrel of rim? 1/4”? Or not even?

i think less than 1/4"
but that's by looking at it from outside where the view is obstructed by the wheel itself
i haven't tried looking from the inside
maybe next time i get the car up on jack stands

[ntg44]

That looks so good. Love when the wheels just swallow the whole brake disc.

[///Mangler]

Originally Posted by ntgarage44

That looks so good. Love when the wheels just swallow the whole brake disc.

Until a rock gets wedged between the caliper and wheel and machines it like a plasma cutter.

T

[5thscaleracer]

Originally Posted by ///Mangler

Until a rock gets wedged between the caliper and wheel and machines it like a plasma cutter.

T

been there... done that....

[FlyingLow78]

The clearance on the fronts is tight to the wheel spokes, but the barrel is ok. I no longer have StopTechs on my F80, but they fit the front fine and I wasn’t worried. In the rear, the wheel spoke would hit the StopTech caliper if I didn’t use a 5mm spacer.