Crankhub Fix Atlanta

[dcg8r]

Has anyone done the crankhub fix at a local shop in Atlanta?

I've gotten quotes all over the place. So wanted to see what shop folks have used and approximate price. Appreciate it.

[JustAnothaM4]

Check Solo or EuroFed...should be around $2350 for labor.

[modiddy24]

Originally Posted by dcg8r

Has anyone done the crankhub fix at a local shop in Atlanta?

I've gotten quotes all over the place. So wanted to see what shop folks have used and approximate price. Appreciate it.

Following.

Any updates? I’m curious as well. I took my car to Eurofed Decatur for brake job and the rep I spoke to said they do it but needed to confirm pricing with his tech. I never followed back up but that location was great otherwise.

[dcg8r]

Originally Posted by TT DAWG

Following.

Any updates? I’m curious as well. I took my car to Eurofed Decatur for brake job and the rep I spoke to said they do it but needed to confirm pricing with his tech. I never followed back up but that location was great otherwise.

Originally Posted by TT DAWG

Following.

Any updates? I'm curious as well. I took my car to Eurofed Decatur for brake job and the rep I spoke to said they do it but needed to confirm pricing with his tech. I never followed back up but that location was great otherwise.

I haven't followed back up with this but I'm going to check them both soon and will report back.

[heyyouduh]

thread revive.

any updates on Atlanta area shops that can do crank bolt capture or the entire crank hub?

[Andrew@TuningDynamics]

Originally Posted by heyyouduh

thread revive.

any updates on Atlanta area shops that can do crank bolt capture or the entire crank hub?

Are you still looking for a shop to do the crank hub? We are not in Atlanta, but we do offer a vehicle transport service to guests who are not local to us.

Feel free to PM if you have any questions.

[heyyouduh]

Originally Posted by Andrew@TuningDynamics

Are you still looking for a shop to do the crank hub? We are not in Atlanta, but we do offer a vehicle transport service to guests who are not local to us.

Feel free to PM if you have any questions.

Hi, thank you but I think I have found a place.

[SloTUrtle]

Who did u end up going with?

[Madrigal1991]

Originally Posted by SloTUrtle

Who did u end up going with?

Originally Posted by SloTUrtle

Who did u end up going with?

Go to A&A performance in Duluth. Alex will take great care of you. He has done my f80 along with many many more. Euro fed was wanting 6k for the job when I got a quote

[heyyouduh]

I went to Freed Performance which is a Porsche shop and got the one piece Gintani hub. The technician that did my car also drives a F80 M3 and has done the same to his car. So far so good, I'll let you know if it blows up on the track.

I hear great things about Alex so I will try him in the future for other needs.

[horsepower_and_hounds]

Well..... did she blow up?

[heyyouduh]

Originally Posted by horsepower_and_hounds

Well..... did she blow up?

was able to do a couple events and no she did not lol. on second event did get a drivetrain error pulled the code which showed high IATs and turned out to be the stock charge cooler leaking. Replaced that and the cold/hot pipes then got busy with life and couldnt do another event before season ended. Hope to start again in march

[G80.Alex]

Hey folks, Alex from A&A Performance here. We are BMW master tech certified and have pinned over 200 hubs. Give us a shout if you need anything. Located north of Atlanta, GA.