proTUNING Freaks
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Suspension | Brakes | Chassis

Post Reply
 
Thread Tools Search this Thread
      09-22-2019, 08:38 PM   #1
TheBreeze
Lieutenant
United_States
142
Rep
412
Posts

Drives: 2016 F80
Join Date: Aug 2012
Location: Cary, NC

iTrader: (7)

PSS10 installed on non-edc f80! Updated

Spent the day installing and setting up PSS10 coilovers and ground control camber plates. So far I'm absolutely loving the look. Paired with 17.5mm/15mm spacers front/back using stock tires. So far I'm loving the ride, very comfortable. Going to give it a couple of weeks to break in before alignment and final adjustments.
Attached Images
         
__________________
2016 F80 M3 (Mineral/Full SO)
2014 X5 M Sport (Mineral/Mocha)

Last edited by TheBreeze; 11-12-2019 at 09:57 AM..
Appreciate 3
      09-23-2019, 12:29 PM   #2
gatorfast
Major General
gatorfast's Avatar
United_States
2906
Rep
5,995
Posts

Drives: F80 M3
Join Date: Jan 2008
Location: SoFla

iTrader: (4)

Looks great! I am without EDC as well and have considered these coilovers as the lowering doesnt seem to be as extreme as some of the others out there.
Appreciate 0
      09-23-2019, 01:57 PM   #3
ntg44
Major
ntg44's Avatar
United_States
894
Rep
1,018
Posts

Drives: '17 M3 Mineral White 6MT
Join Date: Aug 2018
Location: Chicago

iTrader: (2)

Quote:
Originally Posted by gatorfast View Post
Looks great! I am without EDC as well and have considered these coilovers as the lowering doesnt seem to be as extreme as some of the others out there.
The height adjustment range is far greater than the quoted range provided by Bilstein. You can set the rears to stock or higher than stock height if you really wanted to, and the fronts can go much higher than the quoted -30mm minimum drop. Not sure if this info was useful or not, but thought I'd chime in in case it helped you make a decision.
Appreciate 0
      09-23-2019, 04:04 PM   #4
TheBreeze
Lieutenant
United_States
142
Rep
412
Posts

Drives: 2016 F80
Join Date: Aug 2012
Location: Cary, NC

iTrader: (7)

I have the fronts down all the way, the rears could probably drop another 2+ inches. I was really looking for consistent fender gap all around, and I got it pretty close. The rears are a bitch to adjust height. The provided wrench is too long, so I cut a couple of inches off of it, so I could actually turn the wrench without having to remove the fender liners. Still took a while, but it's close now, so any more adjustments shouldn't take too long.
__________________
2016 F80 M3 (Mineral/Full SO)
2014 X5 M Sport (Mineral/Mocha)
Appreciate 0
      09-23-2019, 04:50 PM   #5
swagon
Brigadier General
swagon's Avatar
No_Country
4329
Rep
4,717
Posts

Drives: E82|F80|6MT
Join Date: Jun 2013
Location: .

iTrader: (0)

Please provide more info on how it rides when you rack up some more miles, I'm also non-EDC, on 18's.
__________________
Appreciate 0
      09-24-2019, 12:05 AM   #6
blockdoc
First Lieutenant
United_States
211
Rep
394
Posts

Drives: 2015 M4
Join Date: Jul 2018
Location: Santa Barbara, CA

iTrader: (0)

Looks Great!!! Are those 18s or 19s?
Appreciate 0
      09-24-2019, 06:18 AM   #7
TheBreeze
Lieutenant
United_States
142
Rep
412
Posts

Drives: 2016 F80
Join Date: Aug 2012
Location: Cary, NC

iTrader: (7)

Quote:
Originally Posted by blockdoc View Post
Looks Great!!! Are those 18s or 19s?
OEM 19s
__________________
2016 F80 M3 (Mineral/Full SO)
2014 X5 M Sport (Mineral/Mocha)
Appreciate 0
      09-24-2019, 06:44 AM   #8
M3Diaz
Enlisted Member
United_States
9
Rep
44
Posts

Drives: F80 M3
Join Date: Apr 2017
Location: Rolesville, NC

iTrader: (0)

Looks great. I'm in Rolesville but I'm sure I'll run into you around town.
Appreciate 0
      09-24-2019, 12:25 PM   #9
Kilabyte
Private First Class
Poland
62
Rep
148
Posts

Drives: Mineral White M3 6MT
Join Date: Jun 2019
Location: Massachusetts

iTrader: (1)

Looks perfect for my taste. What sucks is that my rears look exactly like that with Eibachs and spacers but the front has a larger gap, this makes everything look like it should.
__________________

S55, 2JZ
Appreciate 0
      09-24-2019, 02:58 PM   #10
knightarmor
Captain
408
Rep
888
Posts

Drives: 2017 M3
Join Date: Jan 2015
Location: Washington

iTrader: (0)

Looks fantastic!
Appreciate 0
      09-24-2019, 03:47 PM   #11
phoenx
First Lieutenant
177
Rep
365
Posts

Drives: E46 M3, F80 M3
Join Date: Mar 2011
Location: Los Angeles, CA

iTrader: (0)

Looks good! I have PSS10's and love em. Have done two long road trips and like them a lot. Height adjustment range is great and you can dial them to have no wheel gap.

Appreciate 0
      11-12-2019, 09:56 AM   #12
TheBreeze
Lieutenant
United_States
142
Rep
412
Posts

Drives: 2016 F80
Join Date: Aug 2012
Location: Cary, NC

iTrader: (7)

Update

Figured I'd give folks an update now that it's been 6 weeks. I'm very happy with the PSS10 and Ground Control setup. The car appears to have settled a touch lower, stance is perfect for my taste. I do have to be careful on some driveways and have to take some of them on an angle, but speed bumps and such haven't posed a problem. Car feels really tight, is still comfortable around town, and NVH is manageable. Now that it's broken in, I'm currently using setting 4 on the front and 3 on the rear. It's definitely stiffer than the factory non-EDC suspension, but still comfortable the vast majority of the time.

That said, hitting pot holes or uneven expansion joints at speeds above 30 is extremely harsh and jarring. If the roads are bad where you live, you may want to think twice before going to a system like this. I'm sure the Ground Control plates contribute to the problem, as does having the front coilovers all the way down. YMMV.

NVH is increased, but it''s very dependent on the road surface. Smooth blacktop is very quiet. Abrasive surfaces and rain-grooved concrete transfers quite a bit of tire noise. It's not like these roads were quiet on the stock suspensions either, but it's definitely more pronounced with the coilovers/camber plates installed.

I won't hit the track until next spring, so I'll add comments on track performance then.
__________________
2016 F80 M3 (Mineral/Full SO)
2014 X5 M Sport (Mineral/Mocha)

Last edited by TheBreeze; 11-13-2019 at 10:16 AM..
Appreciate 0
      11-13-2019, 06:26 AM   #13
swagon
Brigadier General
swagon's Avatar
No_Country
4329
Rep
4,717
Posts

Drives: E82|F80|6MT
Join Date: Jun 2013
Location: .

iTrader: (0)

Quote:
Originally Posted by TheBreeze View Post
Figured I'd give folks an update now that it's been 6 weeks. I'm very happy with the PSS10 and Ground Control setup. The car appears to have settled a touch lower, stance is perfect for my taste. I do have to be careful on some driveways and have to take some of them on an angle, but speed bumps and such haven't posed a problem. Car feels really tight, is still comfortable around town, and NVH is manageable. Now that it's broken in, I'm currently using setting 4 on the front and 3 on the rear. It's definitely stiffer than the factory non-EDC suspension, but still comfortable the vast majority of the time.

That said, hitting even shallow pot holes or uneven expansion at speeds above 30 is extremely harsh and jarring. If the roads are bad where you live, you may want to think twice before going to a system like this. I'm sure the Ground Control plates contribute to the problem, as does having the front coilovers all the way down. YMMV.

NVH is increased, but it''s very dependent on the road surface. Smooth blacktop is very quiet. Abrasive surfaces and rain-grooved concrete transfers quite a bit of tire noise. It's not like these roads were quiet on the stock suspensions either, but it's definitely more pronounced with the coilovers/camber plates installed.

I won't hit the track until next spring, so I'll add comments on track performance then.
Thanks for the update.

The fact that it feels harsh and jarring at city speeds even at your soft settings (out of the 10 clicks available) is no bueno.

I live in a shithole full of potholes so I for sure don't want it any stiffer than it is now on non-EDC dampers and stock 18's. I find it great at higher speeds, but around town, it is stiff and bouncy enough for me.
__________________
Appreciate 0
      11-13-2019, 09:46 AM   #14
gatorfast
Major General
gatorfast's Avatar
United_States
2906
Rep
5,995
Posts

Drives: F80 M3
Join Date: Jan 2008
Location: SoFla

iTrader: (4)

Agree, thanks for the update and I am also surprised at the reported harshness of this setup. The PSS10 were supposedly the best street coilover option.
Appreciate 0
      11-13-2019, 10:10 AM   #15
TheBreeze
Lieutenant
United_States
142
Rep
412
Posts

Drives: 2016 F80
Join Date: Aug 2012
Location: Cary, NC

iTrader: (7)

Quote:
Originally Posted by gatorfast View Post
Agree, thanks for the update and I am also surprised at the reported harshness of this setup. The PSS10 were supposedly the best street coilover option.
I think I'm going to try increasing the damping and see what that does. The issue only occurs where there are sharp and pronounced elevation changes, and it's quite possible that it's crashing up against the internal bump stop. That's what it feels like anyway.
__________________
2016 F80 M3 (Mineral/Full SO)
2014 X5 M Sport (Mineral/Mocha)
Appreciate 0
      11-28-2019, 03:45 AM   #16
AlterZgo
Major
521
Rep
1,086
Posts

Drives: 2015 BMW M3 6MT, 2010 535i 6MT
Join Date: Sep 2010
Location: Orange County, CA

iTrader: (0)

I've been running PSS10 coilovers for about 3 yrs and 22K+ miles now. I think the harshness you are experiencing is because the car is WAY too low. You need raise the car up to let the suspension do it's job. Increasing damping to stiffer may help as it will keep the suspension off the bump stops a bit more, but the reality is, with so little suspension travel up front, ain't no amt of damping adjustments that will really fix the issue.

My car was lowered modestly - still a good 2 finger gap up front and 1 finger gap in rear. This makes the car look massively better than stock but does not look slammed. With this ride height and dampers set at 4 front and 5 rear, I thought the car rode extremely well - better than stock in virtually all situations and eons better than when I had the KW HAS springs on stock dampers.

Now, with just 22K miles on the coilovers, I do feel that the damping is pretty worn and the suspension is feeling more harsh than I like as it is blowing through the suspension travel and bottoming out more and rebound damping is not as strong as when newer. Still feels better than KW HAS on stock shocks, but not as good as when I first installed the PSS10s.

If you really want to improve ride quality AND reduce the tire gap, go up 10mm front and rear in tire size. I'm running 265/35/19 F and 285/35/19 R. I have tires set at 32 PSI all around. This nicely closes the wheel well gap while also noticeably increasing traction and improving ride quality.

Personally, I don't know how people drive around with little or no front end gap AND run real carbon fiber front lips. I can only imagine how crappy the ride quality is with like .5" of suspension travel, no matter what coilover or spring set up people have. But, I guess some people just prioritize looks over handling and ride quality.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:48 PM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST