Lowered with 19x9.5 et20 and 19.10.5 et 25

[Silverlining_m2]

Lowered about an inch inch on Swift springs and waiting on a new set of wheels. I was able to choose from 2 different offset options.

I wanted the offsets deep and aggressive and went with 19x9.5 et20 and 19x10.5 et25. 255/285 tires. They guaranteed fit, but will they really fit?

Everything i find says the front is fine, but that's too aggressive for the rears. Again, they guaranteed fitment. the other offset choice for the rear was et42. That's obviously a 17mm difference which blows my mind.

Anyone know how flush they'll be? Or how far past? From oem 437's, the rear will be out 21mm and I know 15mm spacers are common on stock wheels. Should I have gotten 275 tires and stretched them more?

[horsepower_and_hounds]

flush is 9.5 ET22 F & 10.5 ET34 R

[Silverlining_m2]

Originally Posted by horsepower_and_hounds

flush is 9.5 ET22 F & 10.5 ET34 R

Thanks. Well it looks like I'm going to be 9mm extra fat then. I'm disappointed they guaranteed fitment but perhaps I will enjoy the look. PPF sides here I come lol. It's a little dumb that my only choices were 9mm extended, or 8mm retracted. :

[horsepower_and_hounds]

Originally Posted by F82spaceship

Thanks. Well it looks like I'm going to be 9mm extra fat then. I'm disappointed they guaranteed fitment but perhaps I will enjoy the look. PPF sides here I come lol. It's a little dumb that my only choices were 9mm extended, or 8mm retracted. :

I am not saying they won't fit.... I just know with my wheels in I drop a plumb bob they are pretty much flush dropped on coilovers and stock alignment

[Silverlining_m2]

Originally Posted by horsepower_and_hounds

I am not saying they won't fit.... I just know with my wheels in I drop a plumb bob they are pretty much flush dropped on coilovers and stock alignment

I'll be sure to share some pics around. They shipped today!

[Rod_knee]

Here's a pic for reference of
19x9.5 +15 with 265/35/19 & 19x10.5 +23 with 295/30/19 lowered on KW ddc plug and play. Mind you that lower your go, you increase camber in rear but not front unless you have aftermarket adjustable top hat.

[Silverlining_m2]

Originally Posted by horsepower_and_hounds

I am not saying they won't fit.... I just know with my wheels in I drop a plumb bob they are pretty much flush dropped on coilovers and stock alignment

Originally Posted by Rod_knee

Here's a pic for reference of
19x9.5 +15 with 265/35/19 & 19x10.5 +23 with 295/30/19 lowered on KW ddc plug and play. Mind you that lower your go, you increase camber in rear but not front unless you have aftermarket adjustable top hat.

They're here and I'm liking the fitment. In the future I may go 285/30 or 295/30 in rear and 265/35 up front. I am liking the 255/35 and 285/35 together. No rubbing yet, and tight fit.

[F82mac]

Ik this is old forum but hopefully you see this, looking at 19x9 +20 and 19x10+20 would you think they will fit on f82? Oe suspension & wheels, 255/35/19 275/35/19

[Silverlining_m2]

Originally Posted by F82mac

Ik this is old forum but hopefully you see this, looking at 19x9 +20 and 19x10+20 would you think they will fit on f82? Oe suspension & wheels, 255/35/19 275/35/19

Pretty sure it'll depend on the offsets.