What widths are everyone ordering on 20" HRE?

dut · 01-25-2015, 04:48 PM

Quote:

Originally Posted by JDUni1

What's up brotha! Saw a pic of your car next to Matt's 991 at HG Motorsports open house. Looking good bro!

Thanks brotha.

And after Matt bounced, a damn GT3 parked next to me.

JDUni1 · 01-25-2015, 07:42 PM

Quote:

Originally Posted by dut

Thanks brotha.

And after Matt bounced, a damn GT3 parked next to me.

I mean, I love my car and all, but a 991 turbo or GT3 would we epic!

mshab356 · 01-29-2015, 09:45 PM

Quote:

Originally Posted by dut

A little late to the thread, but here is my quote from another thread I posted in:

So basically, I'd say 11" width with +35 offset is probably the max you'd want to go if you want to run a 305 tire.

Wuddup JDUni1

You running any springs/coil over setups? How low did you go from stock?

dut · 01-29-2015, 11:06 PM

Quote:

Originally Posted by mshab356

You running any springs/coil over setups? How low did you go from stock?

I'm running KW V3 coilovers. The front is lowered approx. 2.75" and the rear is lowered approx. 2.5"

And I should rephrase my comment: So basically, I'd say +35 offset is probably the lowest offset you'd want to go if you want to run a 305 tire on an 11" width wheel in the rear.

mshab356 · 01-30-2015, 10:41 AM

Quote:

Originally Posted by dut

I'm running KW V3 coilovers. The front is lowered approx. 2.75" and the rear is lowered approx. 2.5"

And I should rephrase my comment: So basically, I'd say +35 offset is probably the lowest offset you'd want to go if you want to run a 305 tire on an 11" width wheel in the rear.

So I'm assuming you could go lower offset on 11.5" wheel with 305 tire?

NorCal f80 · 01-30-2015, 03:01 PM

Quote:

Originally Posted by mshab356

So I'm assuming you could go lower offset on 11.5" wheel with 305 tire?

opposite. will need higher offset if wider

guessing +41 or +42 with 11.5" wide if you're sticking with his recommendation up there.

mshab356 · 01-31-2015, 11:30 AM

Quote:

Originally Posted by 0-100 real quick

opposite. will need higher offset if wider

guessing +41 or +42 with 11.5" wide if you're sticking with his recommendation up there.

Really? Man I am having a hard time visualizing it...

So if I want to run 305 in the rear (19" wheels/35mm profile), and lower the car on springs, but looking for the concave look, I should run a narrower wheel to be able to rock a lower offset?