Wagner Intercooler Fitment Issues?

E92TiAg335i · 02-20-2021, 09:32 PM

Hey guys.

Does anyone have any experience with the Wagner intercooler? Does it rub against the hood?

This is the biggest issue stopping me from purchasing this unit. I don't want any rubbing or other issues.

BadM4 · 02-21-2021, 02:59 AM

Mine fits just fine

E92TiAg335i · 02-21-2021, 08:58 AM

Quote:

Originally Posted by BadM4

Mine fits just fine

Doesnt hit the hood at all? No vibrations? No noise? Basically feels 100% OEM in terms of fitment?

azuritschwarz · 02-21-2021, 10:16 AM

I had the same TMIC leak issue. I looked at the Wagner as well & from what I have seen/heard, fitment is predominantly an issue on the F87 but it can still happen on the F8x. Not sure the correlation. I passed up on a Wagner unit for the same reasons that you are skeptical.

At the end of the day, I could not justify paying close to $2,000 for something that "might" fit. I'm also not tuned nor do I plan to be, so the Wagner might have been a bit overkill for my use. I just picked up a lightly used CSF unit for ~50% of the price instead.

E92TiAg335i · 02-21-2021, 10:18 AM

Quote:

Originally Posted by azuritschwarz

I had the same TMIC leak issue. From what I have seen/heard, it is predominantly an issue on the F87 but it can still happen on the F8x. Not sure the correlation. I passed up on a Wagner unit for the same reasons that you are sceptical.

At the end of the day, I could not justify paying close to $2,000 for something that "might" fit. I'm also not tuned nor do I plan to be, so the Wagner might have been a bit overkill. I just picked up a lightly used CSF unit for ~65% of the price instead.

I'm tuned and will be FBO/E85 soon, but it's just the fitment issue that i'm skeptical about.

That's why i'm hoping people with the Wagner unit will see this post, comment, and put my mind to ease

Bluer2 · 02-21-2021, 11:11 PM

i have a wagner with a GTS hood. fits fine no rubbing or vibrations at all

E92TiAg335i · 02-23-2021, 10:44 PM

Quote:

Originally Posted by Bluer2

i have a wagner with a GTS hood. fits fine no rubbing or vibrations at all

Does the GTS hood have less clearance than OEM?

Bmwlmr99 · 02-24-2021, 12:02 PM

willing to sale my CSF top mount intercooler used....good condition

Kuucheki · 02-24-2021, 12:05 PM

Quote:

Originally Posted by Bmwlmr99

willing to sale my CSF top mount intercooler used....good condition

Location? Pm me price please

BadM4 · 02-24-2021, 10:49 PM

Quote:

Originally Posted by E92TiAg335i

Doesnt hit the hood at all? No vibrations? No noise? Basically feels 100% OEM in terms of fitment?

No problems at all I’ve had it on 8 months, if it was rubbing the hood my custom paint would have marks on it. What noise?

E92TiAg335i · 02-25-2021, 07:49 AM

Quote:

Originally Posted by BadM4

Quote:

Originally Posted by E92TiAg335i

Doesnt hit the hood at all? No vibrations? No noise? Basically feels 100% OEM in terms of fitment?

No problems at all I’ve had it on 8 months, if it was rubbing the hood my custom paint would have marks on it. What noise?

I'm glad i'm hearing the positive reviews now!

I just bought one and it's scheduled for delivery today 🙂

TopJimmy · 02-28-2021, 09:27 AM

Easy way: TMIC Swap
https://f80.bimmerpost.com/forums/sh....php?t=1803465

E92TiAg335i · 03-06-2021, 03:09 PM

Does anyone how to get these on? They keep popping off and won't go on...

hC1001 · 03-06-2021, 04:35 PM

Put the connector to the palm of your hand and use your other hand to hold the intercooler and push the connector in.

Mike. · 03-06-2021, 04:36 PM

Those were a bitch I did my intercooler today too

E92TiAg335i · 03-06-2021, 04:41 PM

Quote:

Originally Posted by hC1001

Put the connector to the palm of your hand and use your other hand to hold the intercooler and push the connector in.

Yeah— found out the issue is the welds are too thick...

I've already contacted XHP and Wagner for a return. Let's see how this is handled...

TopJimmy · 03-06-2021, 08:30 PM

Aww that stinks. Somebody welded that fitting a little too much. You could whiz off the plastic just enough to fit using a dremel wheel.

E92TiAg335i · 03-06-2021, 08:40 PM

Quote:

Originally Posted by TopJimmy

Aww that stinks. Somebody welded that fitting a little too much. You could whiz off the plastic just enough to fit using a dremel wheel.

Yeah, man... insane for a $2000 unit... i don't want to saw anything off or modify it...

I already contacted Mike@XPH. I hope this gets resolved quickly. My tech (very well known shop in South Florida) was appalled by this...

something you'd expect from a china IC, not one of the most expensive ones on the market!

hC1001 · 03-06-2021, 09:10 PM

Errr... Sorry to hear.

E92TiAg335i · 03-06-2021, 09:16 PM

Quote:

Originally Posted by hC1001

Errr... Sorry to hear.

I mean look... shit happens... i'm pissed, but it's up to the vendor and manufacturer to make things right. I'm more curious to see how this situation is handled moving forward. If it can be replaced with a non-defective unit... then it should just be a small bump in the road.

If i get told to kick rocks— then that's a different story. Again, it's not a chinese IC, but rather one of the "best" on the market.

Bluer2 · 03-06-2021, 09:44 PM

there shouldn't be any welds at all on the 2 connector points.

hC1001 · 03-06-2021, 09:52 PM

Quote:

Originally Posted by Bluer2

mine doesn't have any welds at all on the 2 connector points.

Wow. Thats very useful info and makes sense why the OP is having issues...

02-20-2021, 09:32 PM	#1
E92TiAg335i Captain 216 Rep 849 Posts Drives: 2016 F82 M4 Azurite/Opal DCT Join Date: Sep 2015 Location: Boca Raton, Florida iTrader: (0)	Wagner Intercooler Fitment Issues? Hey guys. Does anyone have any experience with the Wagner intercooler? Does it rub against the hood? This is the biggest issue stopping me from purchasing this unit. I don't want any rubbing or other issues. __________________ Current: 2016 F82 DCT M4 FBO Daily.
	Appreciate 0 Tweet Quote

02-21-2021, 02:59 AM	#2
BadM4 Captain 248 Rep 961 Posts Drives: 2018 IND TANZANITE COMP M4 Join Date: Jan 2010 Location: las vegas, nv iTrader: (0)	Mine fits just fine Attached Images __________________ 2018 Individual Tanzanite Blue M4
	Appreciate 0 Quote

02-21-2021, 10:16 AM	#4
azuritschwarz First Lieutenant 348 Rep 352 Posts Drives: 2007 E90 335i, 2016 F80 M3 Join Date: Nov 2017 Location: Edmonton, AB iTrader: (0) Garage List 2017 BMW 440i Coupe [0.00] 2006 BMW 330i [0.00] 2007 BMW 335i [0.00] 2016 BMW M3 [0.00]	I had the same TMIC leak issue. I looked at the Wagner as well & from what I have seen/heard, fitment is predominantly an issue on the F87 but it can still happen on the F8x. Not sure the correlation. I passed up on a Wagner unit for the same reasons that you are skeptical. At the end of the day, I could not justify paying close to $2,000 for something that "might" fit. I'm also not tuned nor do I plan to be, so the Wagner might have been a bit overkill for my use. I just picked up a lightly used CSF unit for ~50% of the price instead. __________________ 2016 F80 M3 6MT Azurite Black/Sakhir Orange Full Leather 2007 E90 335i 6MT Black Sapphire Metallic/Terra Brown Leather 2017 F32 440i xDrive 6MT Alpine White/Coral Red Leather (SOLD) 2006 E90 330i 6MT Arctic Metallic/Lemon White Leather (SOLD)
	Appreciate 1 Kilabyte3948.00 Quote

02-21-2021, 11:11 PM	#6
Bluer2 Captain 533 Rep 916 Posts Drives: F80 Join Date: Feb 2017 Location: Houston iTrader: (9)	i have a wagner with a GTS hood. fits fine no rubbing or vibrations at all
	Appreciate 2 TopJimmy5458.50 JustAnothaM4883.50 Quote

02-24-2021, 12:02 PM	#8
Bmwlmr99 First Lieutenant 209 Rep 314 Posts Drives: Bmw m4 Join Date: Jul 2016 Location: Texas iTrader: (0)	willing to sale my CSF top mount intercooler used....good condition
	Appreciate 0 Quote

02-28-2021, 09:27 AM	#12
TopJimmy Major General 5459 Rep 5,152 Posts Drives: 2023 M3 Comp xDrive Join Date: Jul 2019 Location: Chester County, PA iTrader: (5)	Easy way: TMIC Swap https://f80.bimmerpost.com/forums/sh....php?t=1803465 __________________ '18 F80 Base 6MT \| '19 F82 Exec DCT \| '18 F82 Comp Exec DCT \| '23 G80cx
	Appreciate 0 Quote

03-06-2021, 03:09 PM	#13
E92TiAg335i Captain 216 Rep 849 Posts Drives: 2016 F82 M4 Azurite/Opal DCT Join Date: Sep 2015 Location: Boca Raton, Florida iTrader: (0)	Does anyone how to get these on? They keep popping off and won't go on... Attached Images __________________ Current: 2016 F82 DCT M4 FBO Daily.
	Appreciate 0 Quote

03-06-2021, 04:35 PM	#14
hC1001 Captain 591 Rep 988 Posts Drives: E36 M3, F80 M3 Join Date: Nov 2019 Location: Brooklyn, NY iTrader: (4)	Put the connector to the palm of your hand and use your other hand to hold the intercooler and push the connector in.
	Appreciate 0 Quote

03-06-2021, 04:36 PM	#15
Mike. Mike: Everyone's Pal 2044 Rep 2,972 Posts Drives: F80 M3 Join Date: May 2013 Location: Eastern Long Island iTrader: (5) Garage List 2013 BMW 335xi [10.00]	Those were a bitch I did my intercooler today too __________________ Alpine MSS Stage 2+ E30 tune\|MST Intakes\|VRSF Single Mid Pipe\|Agency Power Intercooler\|VTT Full solution crank hub fix
	Appreciate 1 TopJimmy5458.50 Quote

03-06-2021, 08:30 PM	#17
TopJimmy Major General 5459 Rep 5,152 Posts Drives: 2023 M3 Comp xDrive Join Date: Jul 2019 Location: Chester County, PA iTrader: (5)	Aww that stinks. Somebody welded that fitting a little too much. You could whiz off the plastic just enough to fit using a dremel wheel. __________________ '18 F80 Base 6MT \| '19 F82 Exec DCT \| '18 F82 Comp Exec DCT \| '23 G80cx
	Appreciate 0 Quote

03-06-2021, 09:10 PM	#19
hC1001 Captain 591 Rep 988 Posts Drives: E36 M3, F80 M3 Join Date: Nov 2019 Location: Brooklyn, NY iTrader: (4)	Errr... Sorry to hear.
	Appreciate 0 Quote

03-06-2021, 09:44 PM	#21
Bluer2 Captain 533 Rep 916 Posts Drives: F80 Join Date: Feb 2017 Location: Houston iTrader: (9)	there shouldn't be any welds at all on the 2 connector points. Last edited by Bluer2; 03-06-2021 at 09:55 PM..
	Appreciate 2 hC1001591.00 TopJimmy5458.50 Quote