F82 coding for driver's seat to move back to exit?

[Eric SS]

Hello all. My SS has this feature and I love it. When I turn off the car the driver's seat moves back making getting in and out so much easier.

I've read some threads on here but honestly the ones I've found have a lot of info in them but a lot of the info says "I tried it and it didn't work" or it's for the F80.

Does anyone have a clear and simple way of explaining how I code this feature in using BimmerCode? Thanks so much.

[kubax86]

Originally Posted by Eric SS

Hello all. My SS has this feature and I love it. When I turn off the car the driver's seat moves back making getting in and out so much easier.

I've read some threads on here but honestly the ones I've found have a lot of info in them but a lot of the info says "I tried it and it didn't work" or it's for the F80.

Does anyone have a clear and simple way of explaining how I code this feature in using BimmerCode? Thanks so much.

SM2 module:
SM2 -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28
SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C

FEM module:
30C0 EINSTIEGSH_LN_AKTIV set to: aktiv
30C0 EINSTIEGSH_NG_AKTIV set to: aktiv
30C0 PRIO_ACHSEN set to: werte - 01

[Eric SS]

Awesome, thank you so much. I'll give it a shot later

[kubax86]

Originally Posted by Eric SS

Awesome, thank you so much. I'll give it a shot later

No problem, let me know if it worked for you.

[N1rve]

Originally Posted by kubax86

SM2 module:
SM2 -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28
SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C

FEM module:
30C0 EINSTIEGSH_LN_AKTIV set to: aktiv
30C0 EINSTIEGSH_NG_AKTIV set to: aktiv
30C0 PRIO_ACHSEN set to: werte - 01

What does this part do?

FEM module:
30C0 EINSTIEGSH_LN_AKTIV set to: aktiv
30C0 EINSTIEGSH_NG_AKTIV set to: aktiv
30C0 PRIO_ACHSEN set to: werte - 01

It looks like it's for electronic steering wheel? But we don't have this on the F8X, right?

[kubax86]

Originally Posted by N1rve

What does this part do?

FEM module:
30C0 EINSTIEGSH_LN_AKTIV set to: aktiv
30C0 EINSTIEGSH_NG_AKTIV set to: aktiv
30C0 PRIO_ACHSEN set to: werte - 01

It looks like it's for electronic steering wheel? But we don't have this on the F8X, right?

EINSTIEGH - EINSTIEGSHILFE
These codes are explained in EsysX actually so you can edit CAFD and check.

[Adcampo]

I've done this in my F80 and my F82. It's a nice feature, but sometimes it chooses not to work. Odd.

[N1rve]

Originally Posted by Adcampo

I've done this in my F80 and my F82. It's a nice feature, but sometimes it chooses not to work. Odd.

I have encountered this if my seat is too far back.

[horsepower_and_hounds]

Originally Posted by N1rve

I have encountered this if my seat is too far back.

Exactly...if you seat is not in a certain range in your preferred driving position then it does not activate. Never could figure it out

Mine was always in the out of range position so it never worked..... and I am only 5'8"

[N1rve]

Originally Posted by horsepower_and_hounds

Exactly...if you seat is not in a certain range in your preferred driving position then it does not activate. Never could figure it out

Mine was always in the out of range position so it never worked..... and I am only 5'8"

I'm only an inch taller than you so I can see why.

[gspannu]

Originally Posted by horsepower_and_hounds

Exactly...if you seat is not in a certain range in your preferred driving position then it does not activate. Never could figure it out

Mine was always in the out of range position so it never worked..... and I am only 5'8"

Originally Posted by N1rve

I'm only an inch taller than you so I can see why.

Originally Posted by N1rve

I have encountered this if my seat is too far back.

Originally Posted by Adcampo

I've done this in my F80 and my F82. It's a nice feature, but sometimes it chooses not to work. Odd.

I am assuming you guys are aware that the value of EAH_VERFAHRWEG_SLV_PHYS can be set to higher values to allow more movement of the seat. I have set the value to x60 (which is 60 in HEX or 96 mm - nearly 10 cms).

Also, the other value EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS denotes how much gap to retain at the back. A lower value will cause the seat to move backwards a lot more. All values are in in mm and need to be input in Hex.

[horsepower_and_hounds]

Originally Posted by gspannu

I am assuming you guys are aware that the value of EAH_VERFAHRWEG_SLV_PHYS can be set to higher values to allow more movement of the seat. I have set the value to x60 (which is 60 in HEX or 96 mm - nearly 10 cms).

Also, the other value EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS denotes how much gap to retain at the back. A lower value will cause the seat to move backwards a lot more. All values are in in mm and need to be input in Hex.

Yes i do....I paid to have the car coded and he could never get it to function correctly. So either I am out of the range or..... my used car is screwed up. Either way I live without it at the moment. Guess I could play with it myself. I have bimmercode but I royally screwed some stuff up on the M2 so stuck with paying someone

[N1rve]

Originally Posted by gspannu

I am assuming you guys are aware that the value of EAH_VERFAHRWEG_SLV_PHYS can be set to higher values to allow more movement of the seat. I have set the value to x60 (which is 60 in HEX or 96 mm - nearly 10 cms).

Also, the other value EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS denotes how much gap to retain at the back. A lower value will cause the seat to move backwards a lot more. All values are in in mm and need to be input in Hex.

I think I set it pretty far back because if I have someone behind me, their legs start getting crushed

[Navwick]

Originally Posted by Adcampo

I've done this in my F80 and my F82. It's a nice feature, but sometimes it chooses not to work. Odd.

I have this issue if the seat isn’t in one of the preprogrammed memory positions.

[N1rve]

Originally Posted by Navwick

I have this issue if the seat isn’t in one of the preprogrammed memory positions.

That's quite an odd one, I usually fiddle around with my seat adjustments and haven't ran into the issue like that.

[Navwick]

Originally Posted by N1rve

That's quite an odd one, I usually fiddle around with my seat adjustments and haven't ran into the issue like that.

It’s what makes my F82 my F82.

At least that’s what I tell myself at automatic payment time.

[N1rve]

Originally Posted by Navwick

It’s what makes my F82 my F82.

At least that’s what I tell myself at automatic payment time.

It's more like It's what makes a BMW a BMW... Electronic gremlims