| 01-06-2018, 05:53 PM | #199 |
|
Banned
303
Rep 509
Posts |
LCI LED Tail Lights
** Update **
Hey, Finally! !!Latest Upgrade!! http://f80.bimmerpost.com/forums/sho....php?t=1449047 Cheers!  |
|
Appreciate
0
|
| 08-17-2018, 06:35 PM | #203 | |
|
Banned
125
Rep 325
Posts |
Quote:
That avatar is way too cute! No. Much too expensive to justify its' worth to me. I want to do my exhaust - "AA" - Mid Pipe primarily - first and then look into brightening up the engine bay. [Edit: "Ixney" on both of these!] Cheers! Last edited by Dr._Who; 04-09-2019 at 11:57 PM.. |
|
|
Appreciate
0
|
| 03-21-2019, 06:53 AM | #206 |
|
Banned
125
Rep 325
Posts |
Dyno.!
Hey,
I finally was able to get my Dyno. run in! **404 Rear Wheel (All Wheel?) Hp.!!**   It wasn't as simple as most make it out to be, at least not in my case. It's very difficult to get all of the "electronic nanny's" off and to stay off! * There's a "Secret Menu". * Your car will Heat up. * You need to wait for the car to cooldown - with the engine on - before actually turning the ignition off. * You will need to turn the car off and on again, at least a few times, as more than a few lights on your instrument panel will go off on your initial run(s)! I received the following error codes: - Brake - Chassis - Rear Differential You will need to re-cycle (on/off) and wait a bit for these to clear, before you can try another run. **This is how I got the additional +10Hp. Unfortunately, after 2 1/2 plus hours, The Dyno's system (and/or the guy's laptop) went into complete meltdown and I couldn't get a proper & final print out! Cheers! Last edited by Dr._Who; 04-10-2019 at 12:05 AM.. |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
do you also plan update the fronts 
