07-19-2023, 03:33 PM | #1 |
Enlisted Member
18
Rep 33
Posts |
EDC Connector Help
Hey everyone! I’ve spent some time scrubbing the threads and can’t quite find anything on this.
I recently installed an MP HAS kit, and somehow I broke a pin in the edc connector on the top of the strut (picture attached.) Of course, this means I can no longer benefit from the edc system until it gets fixed. I’ve spent some time looking for a part number, but am coming up short. Does anyone have a part number, link, or suggestion to fix it? Or am I left buying an entire strut just to pull the connector off? |
02-01-2024, 05:39 PM | #3 | |
Enlisted Member
18
Rep 33
Posts |
Quote:
I did however find some pins that could possibly be used as a replacement on fcpeuro like this and this. I haven’t tried them so I don’t know if they’re direct fits. Another option is to cut off both connections and replace with a male and female connector like this. And another option entirely is to cut the connectors and just solder the wires directly. Although, understandably, this is the least desirable option in my opinion. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|