Part number help

[Gossypiboma]

Somehow I lost 2 bolts while installing a catch can.

I've scoured Realoem.com and can't seem to find the correct bolts. I've purchased 2 separate sets that were incorrect. What I'm looking for is pictured below. They are part of the hood latch assembly. This is for a 2018 M3 CS if that matters at all.

[M3SQRD]

I think this is it (from realoem.com):

Item 7:
07149229516
Hex bolt with washer
M8X27 Qty 4

[Gossypiboma]

Originally Posted by M3SQRD

I think this is it (from realoem.com):

Item 7:
07149229516
Hex bolt with washer
M8X27 Qty 4

That looks to be it based off the diagram, but when searching that part number online it brings up a hex bolt without the center torx.

[SilleM3]

You guys think you can help me find this bolt? It comes up incorrect also.

[M3SQRD]

It even looks like a plain hex bolt in the diagram. At least the p/n matches the pic hardware but it doesn’t match the real hardware

[M3SQRD]

Originally Posted by SilleM3

You guys think you can help me find this bolt? It comes up incorrect also.

It appears to be item 10. If it’s wrong, not sure where to find it.

[SilleM3]

Originally Posted by M3SQRD

It appears to be item 10. If it’s wrong, not sure where to find it.

Thank you. Yeah it says that's a clip. It's definitely a bolt.

[ron_s55]

closest I found was 41617065160, but it's M8x25, whereas 07149229516 is M8x27
https://www.ecstuning.com/b-genuine-...t/41617065160/