FS: BBS RS-ii w/ Tires

[not.ramos]

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Item Interest

FS: BBS RS-ii

Price: $5,200 OBO

Model: RS714

Specs: 19x9.5 +20, 19x10.5 +35

Finish & Build: Brushed clear face, polished lips, raw inner barrel, 24k hardware, 24k valve stem cap, authentic blue/gold center cap, 32-bolt conversion, and TPMS

Condition: 10/10

Tires: (Fronts) Accelera 215/35/19, (Rears) Lionhart 245/35/19. Some camber wear, maybe around 50% life left

Note: The RS714 faces are originally 5x120, but the seller I purchased from had the original seller from overseas re-drill the faces to 5x112 for an Audi (they were going to go on an Audi Allroad). The 5x112 holes that were drilled cover the BBS stamp. I had Mark Perrault (IG: thee-deported) authenticate the faces, if you would like contact him directly for further authentication, I can provide his contact information for any further questions.

Mark Perrault (IG: thee-deported) did the full build for me and they were mounted for the first time September 11, 2020. I drove around 300 miles on these wheels and I got state-ref'd on October 10, 2020. Since then, I have not driven on the BBS.

Save yourself the headache of finding RS714 faces, sending them out, and waiting three months for a re-build.

I am not looking for any trades at this time. Payment will be processed through PayPal. Buyer pays shipping/insurance from ZIP 94550.

Thank you for looking! PM me for any further comments, questions, or concerns.

[pattymtb]

Originally Posted by not.ramos

FS: BBS RS-ii

Price: $5,200 OBO

Model: RS714

Specs: 19x9.5 +20, 19x10.5 +35

Finish & Build: Brushed clear face, polished lips, raw inner barrel, 24k hardware, 24k valve stem cap, authentic blue/gold center cap, 32-bolt conversion, and TPMS

Condition: 10/10

Tires: (Fronts) Accelera 215/35/19, (Rears) Lionhart 245/35/19. Some camber wear, maybe around 50% life left

Note: The RS714 faces are originally 5x120, but the seller I purchased from had the original seller from overseas re-drill the faces to 5x112 for an Audi (they were going to go on an Audi Allroad). The 5x112 holes that were drilled cover the BBS stamp. I had Mark Perrault (IG: thee-deported) authenticate the faces, if you would like contact him directly for further authentication, I can provide his contact information for any further questions.

Mark Perrault (IG: thee-deported) did the full build for me and they were mounted for the first time September 11, 2020. I drove around 300 miles on these wheels and I got state-ref'd on October 10, 2020. Since then, I have not driven on the BBS.

Save yourself the headache of finding RS714 faces, sending them out, and waiting three months for a re-build.

I am not looking for any trades at this time. Payment will be processed through PayPal. Buyer pays shipping/insurance from ZIP 94550.

Thank you for looking! PM me for any further comments, questions, or concerns.

Am I reading this correctly that you have a 215 section tire on a 9.5 inch rim and a 245 section tire on a 10.5 inch rim? The stretch on that is insane! :

[not.ramos]

Originally Posted by pattymtb

Am I reading this correctly that you have a 215 section tire on a 9.5 inch rim and a 245 section tire on a 10.5 inch rim? The stretch on that is insane! :

Yep hahaha. I did that so I could sit as low as possible, tuck as much wheel as I could, not rub at all, and lay the front bumper on the ground when I aired out!

It's not for everyone, I'll admit. But that was my preference at the time.

I did a 215/35 on a 10" and 245/35 on an 11" on my old Work VSXX

I wouldn't advise doing that though

[pattymtb]

Originally Posted by not.ramos

Yep hahaha. I did that so I could sit as low as possible, tuck as much wheel as I could, not rub at all, and lay the front bumper on the ground when I aired out!

It's not for everyone, I'll admit. But that was my preference at the time.

I did a 215/35 on a 10" and 245/35 on an 11" on my old Work VSXX

I wouldn't advise doing that though

Can I ask you how you got any traction with a 245 in the rear? I have 275's and just moved to 295's but my snows are 245 and I baby the thing and it's horrible lol! Was your car more stance life then driving? Honestly just curious bc I see this type of stretched tire look and it doesn't click with me

[not.ramos]

Originally Posted by pattymtb

Can I ask you how you got any traction with a 245 in the rear? I have 275's and just moved to 295's but my snows are 245 and I baby the thing and it's horrible lol! Was your car more stance life then driving? Honestly just curious bc I see this type of stretched tire look and it doesn't click with me

LOL, here's the thing - I didn't.

I actually did daily drive it though. I would drive around 60 miles a day to SF. And took it on the backroads a couple of times, too. Never de-beaded luckily!

Again, it isn't for everyone

[s55jesus]

Originally Posted by pattymtb

Can I ask you how you got any traction with a 245 in the rear? I have 275's and just moved to 295's but my snows are 245 and I baby the thing and it's horrible lol! Was your car more stance life then driving? Honestly just curious bc I see this type of stretched tire look and it doesn't click with me

Keep in mind he didn't have this on an F8x platform. I have not come across anyone in the F8x forums running that much of a stretch.

[not.ramos]

Originally Posted by eff80m3

Keep in mind he didn't have this on an F8x platform. I have not come across anyone in the F8x forums running that much of a stretch.

You’d be surprised. I got my specs on my VSXX from a few other forum users with F80’s.

Perhaps search around? It’s more common than you think.

[Original]

Awesome wheels! Everyone has a different preference/taste in modding cars, no need to bash his thread. If you aren't here to buy his wheels, stop kicking rocks.. GLWS.

[Mr.Pink]

Lol mark perrault.

That guy tried to scam me for a set of RS2 in 5x112. I wonder if he gave you some story and sold you my wheels he never shipped.

[Mr.Pink]

Nvm I missed the part where you sent him faces.

Wheels are beautiful, wish they were super concave faces.

Any pics of them on the car?

[apar]

got any pictures on the car ?

[j2nicee]

Originally Posted by Mr.Pink

Lol mark perrault.

That guy tried to scam me for a set of RS2 in 5x112. I wonder if he gave you some story and sold you my wheels he never shipped.

Id like to hear this story, PM incoming.

[not.ramos]

Originally Posted by D Unit

Does anyone else know how to get in touch with Mark Perrault (aka thee_deported on Instagram, markrperrault@gmail.com)? I had redEYEjedi drop off a set of 20" BBS LMs that Mark agreed to refinish and now he's not responding to any of my calls, voicemails, texts, or emails.

Has anyone been in contact with him recently or know how else to get a hold of him? I want to give him the benefit of doubt, but it's getting pretty obvious that he straight up stole my wheels.

Darren

It’s a common thing for him. If you Google him and go back to VW forums from like a decade ago, they all say the same shit.

Good build quality but 100% sketchy. I’d rather send them to Sensei6 or DevilsWerk in SoCal.

If you have his number you will have to harass him damn near.

[seabass_tian]

what size lips are these? can you rebuild them?

[BenF87M2]

Also interested in lip sizes

[Mr.Pink]

Originally Posted by not.ramos

It’s a common thing for him. If you Google him and go back to VW forums from like a decade ago, they all say the same shit.

Good build quality but 100% sketchy. I’d rather send them to Sensei6 or DevilsWerk in SoCal.

If you have his number you will have to harass him damn near.

Mark is the biggest piece of shit to ever touch a BBS

[not.ramos]

BBS's were sold just last week, thank you everyone for your interest!

[not.ramos]

Originally Posted by Mr.Pink

Mark is the biggest piece of shit to ever touch a BBS

He texted me Monday pretty pissed off, it shows how professional he is LOL.

It is what it is. I will say the wheels came out pretty good, I'll give him that.