Coding - Pay It Forward

[djtonysanchez]

shawnsheridan
Can I get the latest links

Thanks

[shawnsheridan]

Originally Posted by djtonysanchez

shawnsheridan
Can I get the latest links

Thanks

PM sent.

[StealthFish]

This is a stupid question but I will ask it anyway. I was wondering how much damage can messing with the code stuff do to the car? I am definitely going to back up the current parameter files on the vehicle when I start this but am just intrigued to ask this question. I am absolutely terrified to mess something up so I am just going to follow the coding files and parameters to a tee!

I can't wait to start coding, car comes in later this month, approx. 3 weeks or so by the end of March and I have already purchased the cable and have the software (thanks shawnsheridan!!!).

[shawnsheridan]

Originally Posted by StealthFish

This is a stupid question but I will ask it anyway. I was wondering how much damage can messing with the code stuff do to the car? I am definitely going to back up the current parameter files on the vehicle when I start this but am just intrigued to ask this question. I am absolutely terrified to mess something up so I am just going to follow the coding files and parameters to a tee!

I can't wait to start coding, car comes in later this month, approx. 3 weeks or so by the end of March and I have already purchased the cable and have the software (thanks shawnsheridan!!!).

Backups are worthless. Any ECU can easily be reset simply by VO Coding it.

Screwing car up coding it is quite difficult. It can happen, but 99% of time it is recoverable.

[StealthFish]

I guess I shouldn't be worried then.

Update: I found a cable by entering in the cable into EBay. I hope any cable would do if it is a OBDII to RJ45 cable. Thanks!!!

[jzmundy]

Originally Posted by shawnsheridan

Backups are worthless. Any ECU can easily be reset simply by VO Coding it.

Screwing car up coding it is quite difficult. It can happen, but 99% of time it is recoverable.

Was just going to post a new thread, but found my answer. Thank you, sir!

[1MORELAP]

Originally Posted by shawnsheridan

PM sent.

May I have the latest links as well?

Tomasz

[shawnsheridan]

Originally Posted by 1MORELAP

May I have the latest links as well?

Tomasz

PM sent.

[m3nub]

So I'm using e-sys launcher v2.4.3.85, which then opens up to e-sys 3.27.1 "Secured by Token Master" and after verifying physical connection and a 169.x.x.x IP, when I attempt to connect I don't get any targets but I do see the vehicle VIN. What am I doing wrong, I am following all of the tutuorials... I installed about 6 months ago, maybe I am in need of a software update?

Shawn - if I need updated software can you graciously provide me with the links? I would very much appreciate it.

Seneca

[shawnsheridan]

Originally Posted by m3nub

So I'm using e-sys launcher v2.4.3.85, which then opens up to e-sys 3.27.1 "Secured by Token Master" and after verifying physical connection and a 169.x.x.x IP, when I attempt to connect I don't get any targets but I do see the vehicle VIN. What am I doing wrong, I am following all of the tutuorials... I installed about 6 months ago, maybe I am in need of a software update?

Shawn - if I need updated software can you graciously provide me with the links? I would very much appreciate it.

Seneca

If the "Open Connection" window under "Target" is empty (no targets), verify the following:

1. That the "psdzdata" folder is installed properly (From the PSdZData_Lite or PSdZData_Full extraction, copy the "psdzdata" folder to "C:\Data\" (i.e. "C:\Data\psdzdata")
   
2. That the psdzdata chassis folders each have an empty "dist" folder. Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g.:
   • C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\I001\I001_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\K001\K001_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\KE01\KE01_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\RR01\RR01_xx_xx_xxx\od x\dist
3. The the E-Sys "Options" => "Settings" => "Directories => Data: path" is set properly (e.g. "C:\Data")

[m3nub]

Originally Posted by shawnsheridan

If the "Open Connection" window under "Target" is empty (no targets), verify the following:

1. That the "psdzdata" folder is installed properly (From the PSdZData_Lite or PSdZData_Full extraction, copy the "psdzdata" folder to "C:\Data\" (i.e. "C:\Data\psdzdata")
   
2. That the psdzdata chassis folders each have an empty "dist" folder. Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g.:
   • C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\I001\I001_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\K001\K001_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\KE01\KE01_xx_xx_xxx\od x\dist
   • C:\Data\psdzdata\mainseries\RR01\RR01_xx_xx_xxx\od x\dist
3. The the E-Sys "Options" => "Settings" => "Directories => Data: path" is set properly (e.g. "C:\Data")

Nailed it... thank you sir.

I inadvertently set up the folder as such "C:\Data\psdzdata\psdzdata..."

[Nachbar]

Originally Posted by shawnsheridan

Backups are worthless. Any ECU can easily be reset simply by VO Coding it.

Screwing car up coding it is quite difficult. It can happen, but 99% of time it is recoverable.

Hi Shawn, may I have the link to the new files as well please? Due to health problems, I have to sell my F80. So I would be very thankfull, if you could explain, how the default values can be coded. Or is it in a readme file of your package anyways?
Thanks man!

[Almaretto]

Originally Posted by Nachbar

Hi Shawn, may I have the link to the new files as well please? Due to health problems, I have to sell my F80. So I would be very thankfull, if you could explain, how the default values can be coded. Or is it in a readme file of your package anyways?
Thanks man!

PM sent

[Nachbar]

Originally Posted by Almaretto

PM sent

Thank you very much!
I could code everything back, except the stuff in TRSVC. See error in pic below. When I "Detect CAF for SWE" I get about 15 options. But non of them works. Is there a way to fix this?
Thanks for helping!

[Almaretto]

Originally Posted by Nachbar

Thank you very much!
I could code everything back, except the stuff in TRSVC. See error in pic below. When I "Detect CAF for SWE" I get about 15 options. But non of them works. Is there a way to fix this?
Thanks for helping!

Are you injecting to corrupt or missing TRSVC? From picture, it looks like you have green checkmark.

Make sure engine is running. Try without launcher.

[Nachbar]

Originally Posted by Almaretto

Are you injecting to corrupt or missing TRSVC? From picture, it looks like you have green checkmark.

Make sure engine is running. Try without launcher.

Thanks for your reply! I don't know what I should do. Select the Module on the left side and than select "code"?

[Almaretto]

Originally Posted by Nachbar

Thanks for your reply! I don't know what I should do. Select the Module on the left side and than select "code"?

I cannot advise unless you answer my original question.

[Nachbar]

Originally Posted by Almaretto

I cannot advise unless you answer my original question.

Sorry, yes I'm injecting.

[Almaretto]

Originally Posted by Nachbar

Sorry, yes I'm injecting.

Did you try without Launcher?
How about with engine running?

[G_Rock]

Hi Shawn, could you send me the latest links?

Thanks,
Grant

[shawnsheridan]

Originally Posted by G_Rock

Hi Shawn, could you send me the latest links?

Thanks,
Grant

PM sent.

[SrunDMC]

May I have the latest software download links as well?

Thanks in advance!

Originally Posted by shawnsheridan

PM sent.