Coding - Pay It Forward

[JNoSol]

Originally Posted by tonydt1g3r

the mirror delay is on the sheet

3053 KOMFORT_SCHLIESSEN WERTE = 00 FOR NO DELAY

I was able to program the mirror on my friends brand new 235, but I tried programming my M4 and it didnt work, even after waiting an hour. I am using the new esys premium software where you have to select chassis and I had it set for the 235 so I am not sure if that was the reason why it wasnt working. I will try and recode later

When coding, the result is instant after you hit code FDL. No need to wait for an hour to see the result. Just follow the PDF coding parameters.

[iuhutch]

Does the INPA cable work with E-sys software? I used INPA and NCS expert in the past...Wondering if I can use the same cable for this method?

[shawnsheridan]

Originally Posted by iuhutch

Does the INPA cable work with E-sys software? I used INPA and NCS expert in the past...Wondering if I can use the same cable for this method?

If by INPA Cable you mean a K+DCAN Cable, then no. You must use ENET Cable with E-Sys.

[cwhands]

Successfully coded my F80 but have one issue - when I use the key to open/close windows my drivers door window won't move. The other 3 work as normal.

Anyone have suggestions?

Nevermind figured it out

[MaX PL]

OP,

I'm looking to code Euro MDM and possibly Brake Force Lighting.

Is the E-Sys v.2 tutorial pdf in the OP still completely up to date allowing me to code these options?

Secondly, what exactly is the difference between the E-Sys v.2 tutorial and the VO Coding tutorial?
I see that they differ but honestly dont know what VO Coding is at all and how it differs from the changes being done in the E-Sys tutorial.

Thanks

[shawnsheridan]

Originally Posted by MaX PL

OP,

I'm looking to code Euro MDM and possibly Brake Force Lighting.

Is the E-Sys v.2 tutorial pdf in the OP still completely up to date allowing me to code these options?

Secondly, what exactly is the difference between the E-Sys v.2 tutorial and the VO Coding tutorial?
I see that they differ but honestly dont know what VO Coding is at all and how it differs from the changes being done in the E-Sys tutorial.

Thanks

I don't know exactly what you have, but use the latest everything. PM sent.

There are only two kinds of coding, VO Coding and FDL Coding:

VO Coding:

DEFINED: VO = Vehicle Order

CONCEPT: VO Code = Coding of all FDL's (100% of the ECU) to predetermined settings based on the Vehicle Order.

PROCESS: Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

You can VO Code using your factory FA, or modified FA as detailed here:

FDL Coding:

DEFINED: FDL = Function Data Line

CONCEPT: FDL Code = Coding of individual FDL's in an ECU, overriding the VO Coding.

PROCESS: Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on the ECU CAFD and select Read Coding Data => Expand the CAFD Folder by clicking + symbol => Right-Click on the CAFD file and select Edit => Edit CAFD as desired => Click the Blue Floppy Disc Icon to Save CAFD => Click the green back arrow icon => Right-Click on the CAFD file => Select FDL CODE.

To "Edit CAFD as desired" most cases involves changing an FDL's value using a dropdown box of predefined values.

In some FDL Coding instances though, the dropdown box of predefined values does not provide you with the choice you want, in which case you must change the Werte Value directly:

The predefined Dropdown box settings and the Werte values are a matched set. So when you change the Dropdown box setting, the Werte value automatically changes with it.

So for example, if you change a Dropdown box settings from nicht_aktiv to aktiv, the Werte value automatically changes from Werte=00 to Werte=01.

That said, it's the Werte value only that matters. However, since hexadecimal values are hardly descriptive, the Dropdown box settings serve to provide a more descriptive way of representing what the Werte value's mean, and to ease changing them.

So, when you change a Werte Value directly to a custom value, the predefined Dropdown box setting, which does not have a match for the custom value, displays "Unknown". The custom Werte value though is most certainly active so long as it is a valid value.

[aboulfad]

MaX PL , read the first post for EuroMDM cheat code http://f80.bimmerpost.com/forums/sho....php?t=1180683

[MaX PL]

Am I supposed to have ESys, Launcher, and the PSdZData programs all open at once?

What is the purpose of each?

[shawnsheridan]

Originally Posted by MaX PL

Am I supposed to have ESys, Launcher, and the PSdZData programs all open at once?

What is the purpose of each?

All of what you ask is explained in the PM I sent you earlier. Read the instructions in the PM itself and the included E-Sys Installation & Setup Instructions .pdf.

[pbar]

shawnsheridan When you get a moment, could you please send me a pointer to the latest esys? Thanks!

[shawnsheridan]

Originally Posted by pbar

shawnsheridan When you get a moment, could you please send me a pointer to the latest esys? Thanks!

PM sent.

[joofoo]

Hi Shawn, going to attempt to code my 2015 M4 vert -- would you please send me a PM with latest instructions/links? Much appreciated, thanks!!

[shawnsheridan]

Originally Posted by joofoo

Hi Shawn, going to attempt to code my 2015 M4 vert -- would you please send me a PM with latest instructions/links? Much appreciated, thanks!!

PM sent.

[Adz B]

Has anybody else had difficulty enabling HUD turn signals on the F82/3's?

I have carried out the following but get nothing on the HUD.

HU_NBT:
3001 HUD_TURNSIGNAL set to: aktiv

KOMBI:
3008 HUD_PIA_BLINKER set to: aktiv
3000HUD_BLINKER_ENABLE set to: aktiv

Any help appreciated. Thanks for taking the time to assist.

[Adz B]

Not to worry...just found this thread:
http://f80.bimmerpost.com/forums/sho....php?t=1265905

[leftos]

Had my first 1-hour coding session yesterday using a mix of cheat codes and my own manual input and I'm very happy with the results. Even though it was intimidating at first, I got used to the process very quickly. I didn't touch MDM but I'm crossing my fingers I coded the EU spec anti-glare high beams correctly because I'm really excited to try it out. Other than that, small things here and there that just make the car that much more convenient and make me happy for how cheap and easy they were to change and set up exactly how I like. Among my favorites was the immediate window closing and mirror folding using the lock on the fob, as well as unlocking the doors once the engine turns off (people get REALLY confused after they pull the door handle once and nothing happens, heh).

The only change that I reverted was the ASD configuration menu, I cracked up laughing once I saw the "MINI Sounds" menu show up under Settings and all the names they gave to the different ASD levels for the MINIs. I didn't even try to see if they worked, I just got the laptop out and disabled the menu altogether. Still made for a good laugh. IIRC, the loudest setting was called "The Cheeky Devil".

Once again, thank you to the entire community, especially Shawn and DMNC02, as well as everyone else. I'll be glad to stick around and help out any other members that need help.

[dmk08]

So guys just picked up my new 16 ZCP. Looking to code some stuff soon but have not used my setup since the 15s were new. Would it be a good plan to just re-install all the software with the newest files or? Any advice?

[Almaretto]

Originally Posted by dmk08

So guys just picked up my new 16 ZCP. Looking to code some stuff soon but have not used my setup since the 15s were new. Would it be a good plan to just re-install all the software with the newest files or? Any advice?

Depending on which software you were running before, you may wish to update for newest mapping. You will likely need to update Psdzdata at least. You can check your I-step to learn whether you need newer files.

[firedown31]

Originally Posted by dmk08

So guys just picked up my new 16 ZCP. Looking to code some stuff soon but have not used my setup since the 15s were new. Would it be a good plan to just re-install all the software with the newest files or? Any advice?

I uninstalled everything and reinstalled after I upgraded the firmware to 58.3 version. I figured that would be the best solution as there was a newer version of esys too, in addition to the psdzdata. And the PM from Shawn says

* NOTE: If upgrading from a previous E-Sys version, first uninstall current E-Sys version via Windows Control Panel.

[YMB-M3-J2]

Hey Shawn can you send me the updated files please?

Thank You.

[4everkidd]

gents,

is there an update for the 100% brightness LED's now? Level_1 is no longer an active item

I tried the following but i'm not sure if it worked

MAPPING_STANDL_V_L_PWM_LEVEL_STANDARD -100%
MAPPING_STANDL_V_L_PWM_LEVEL_REDUCED -100% MAPPING_STANDL_V_R_PWM_LEVEL_STANDARD -100%
MAPPING_STANDL_V_R_PWM_LEVEL_REDUCED -100%

[Bluex]

Originally Posted by dmk08

So guys just picked up my new 16 ZCP. Looking to code some stuff soon but have not used my setup since the 15s were new. Would it be a good plan to just re-install all the software with the newest files or? Any advice?

Yes. You'll need to update to newest software and the 59.0 psdzdata.

Follow the instructions, uninstall everything and delete contents of data directory before putting 59.0 files in.