08-21-2019, 03:26 AM | #1 |
New Member
10
Rep 29
Posts |
F82 Spacers and 275/30/20+295/30/20
Hello All,
I am currently in the process of changing my tyres and alloys with complete new ones My current setup is F82 Comp 666M OEM Alloys front 9JX20 ET:29 and rear 10JX20 ET:40 265/30/20 + 285/30/20 Michelin Pilot Super Sport with spacers 15mm f and 12mm rear. I will be changing to the following setup: 666M style alloys front 20x8.5 et20 and rear 20x10 et35 with Michelin Sport 4S 275/30/20 and 295/30/20. My question is do you guys suggest that I should remove the spacers completely or keep them on? As From my calculations these alloys a bit further out than OEM alloys. I have an f82 if that helps. Thanks Gee |
09-04-2019, 08:51 AM | #3 |
First Lieutenant
168
Rep 319
Posts |
The new wheels going on would not be flush without the spacers and would be sunk in the fender. The fronts with the new wheel setup, they will sink in 4mm compared to what you have on now with spacers. The rears you will be slightly further out by 4mm with your current wheel setup and spacer.
New wheels without spacers front would be sunk in by 19mm. New rears without spacers would be sunk in by 8mm.
__________________
M4 Yas Marina Blue
F32 Estoril Blue |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|