► APEX | FL-5 Lightweight Track Wheels

[Expert@ApexWheels]

FL-5 wheels look even better when wrapped in some nice wide tires.

[JustAnothaM4]

Originally Posted by Expert@ApexRaceParts

Our new FL-5 wheels are available for pre-order and we are offering enthusiasts Free Shipping on a set of wheels for the rest of May. Check them out on our website here!

Specs on this setup??

[Expert@ApexWheels]

Originally Posted by project e46m3

Specs on this setup??

This picture is actually a render we created before we released our FL-5 wheels to gauge interest from the community for wide FL-5 fitments. However, the closest fitment to this render that we currently have in our FL-5 design would be the 18x10.5" ET22 square setup.

For your reference, here is some additional information regarding this setup from our M3/4 fitment guide:

Front & Rear: 18x10.5" ET22 with 275/35-18 tires
-285/35 or 295/35 tires may also be used.
-Aggressive front and rear negative camber required.
-5mm front spacers typically required depending on suspension configuration.
-Rear rolled fenders recommended.
-Not recommended for limited-clearance suspensions like KW, Öhlins unless
you are willing to modify spring configuration to improve clearance.

This setup will be far from a direct fit and is really only something we would recommend for a track-focused M3/4, due to the high camber requirements front and rear.

If you have any additional questions, please do not hesitate to reach out!

-Geirsen