Login
01-13-2020, 08:43 PM | #1 |
Private First Class
![]() 25
Rep 126
Posts |
Blackvue Dashcam Hardwire without PMP or Cell-link
I don't feel the need to enable parking mode. Can I hardwire a blackvue dash cam to the fuse box in the trunk without using either the power magic pro or the cell-link battery? If I pick a fuse that "shuts off" when I turn the car off, am I still at risk of damaging my battery?
|
01-14-2020, 07:03 AM | #2 |
Second Lieutenant
![]() 34
Rep 285
Posts |
I’m not sure about the fuse option, but you could just run the power cord to the trunk and use the 12v socket. That turns off after 10 min or so after the car is shit down. That is how I’ve wired my Thinkware. Like you, wasn’t interested in parking mode.
|
Appreciate
0
|
01-14-2020, 11:10 AM | #3 |
Colonel
![]() ![]() 340
Rep 2,437
Posts |
why not just stick with the cigarette socket then ?
If it was me, and I went out of my way to hardwire to get to a switched fuse, I might as well do parking mode. If I was concerned about discharge, then I would set high cut off thresholds. |
Appreciate
0
|
01-14-2020, 12:50 PM | #4 | |
Lieutenant
![]() ![]() ![]() ![]() 157
Rep 417
Posts |
Quote:
But if you really don't want parking mode, yeah, just run the power to a source that shuts off with the car and you'll be fine. It can't pull power from a shut off source. |
|
Appreciate
0
|
11-15-2020, 09:52 PM | #6 |
Major General
![]() ![]() ![]() 1829
Rep 5,384
Posts |
Tap into the roof console wires as if you’re running a radar detector. The power shuts off (or shits off as another poster put it) with the ignition.
|
Appreciate
0
|
11-15-2020, 10:33 PM | #8 |
Private First Class
![]() ![]() 72
Rep 144
Posts |
|
Appreciate
1
gprzybylski24.00 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|