My Forever build!

[bimmer pleaser V2]

Originally Posted by Jbonly21

Thanks guys



Yeah it does, it also has all the interior carbon fiber bits as well. Dinan stage 1, and cold air intake, plus M performance exhaust.

YAS M3 is the prettiest 4 door under 100k.

was M performance exhaust only offered on 2015 M3/M4? did it become standard on later years?

[Jbonly21]

Originally Posted by bimmer pleaser V2

YAS M3 is the prettiest 4 door under 100k.

was M performance exhaust only offered on 2015 M3/M4? did it become standard on later years?

I don't believe M performance exhaust wasn't standard on any year off M3 , it's was always an add on item.

[Jbonly21]

2 and a half hours later, and my plugs are done. Went for a little test drive and 🤗. I

[Jbonly21]

Bought my car last December, did a PMI at a BMW dealer and no problem was found. Today at work I decided to check my exhaust for cracks, and to my surprise this is what I found. Could this have happened in two months?

[AlejoEvo]

Originally Posted by Jbonly21

Bought my car last December, did a PMI at a BMW dealer and no problem was found. Today at work I decided to check my exhaust for cracks, and to my surprise this is what I found. Could this have happened in two months?

As I have read, the MP exhaust suffers from cracking. Haven't checked mine but at least I'm aware that it could happen.

Nice car! Hope you're enjoying it!

[AlejoEvo]

Originally Posted by Jbonly21

Thanks, just had GTS dct, steering, and mdm software installed yesterday at EAS, so far the biggest difference is the transmission. Thanks to Tom and his crew for a great service.

How's the car feeling after the software installation? I have read the DCT runs smoother, especially when downshifting form 3rd to 2nd and from 2nd to 1st.

I personally don't like the stalling and if there's a solution, it's welcome!

[JamesF80m3]

Originally Posted by Jbonly21

Bought my car last December, did a PMI at a BMW dealer and no problem was found. Today at work I decided to check my exhaust for cracks, and to my surprise this is what I found. Could this have happened in two months?

I've seen people weld the muffler with titantium to repair, doesnt seem like it'd be to pricey

[Jbonly21]

Originally Posted by AlejoEvo

As I have read, the MP exhaust suffers from cracking. Haven't checked mine but at least I'm aware.
Nice car! Hope you're enjoying it!

Originally Posted by AlejoEvo

How's the car feeling after the software installation? I have read the DCT runs smoother, especially when downshifting form 3rd to 2nd and from 2nd to 1st.

I personally don't like the stalling and if there's a solution, it's welcome!

Yeah the DCT is a lot smoother, and the down shift is a lot better, it doesn't kick down as hard as before.

Originally Posted by HarrisoneliF82

I've seen people weld the muffler with titantium to repair, doesnt seem like it'd be to pricey

[Jbonly21]

Me and one of my co worker just finished welding my V1 exhaust.

[deeldoo]

Originally Posted by Jbonly21

Bought my car last December, did a PMI at a BMW dealer and no problem was found. Today at work I decided to check my exhaust for cracks, and to my surprise this is what I found. Could this have happened in two months?

Yes it could, mine cracked within 2 weeks of ownership.

MPE V1 is a shitstain.

Go into dealer, make friends, tell him exhaust cracked, they will replace it with V2 MPE.

At least for me they did and even replaced my carbon fiber tips.

[AlejoEvo]

Originally Posted by Jbonly21

Me and one of my co worker just finished welding my V1 exhaust.

My exhaust looks different than yours.

Anyone have photos of MPE V2??

[deeldoo]

Originally Posted by AlejoEvo

My exhaust looks different than yours.

Anyone have photos of MPE V2??

I can get it to you once i get my car back from being totalled ah, all it has is braces on each side as support structure, mine hasn't cracked yet i think this design is way more durable

[AlejoEvo]

Originally Posted by deeldoo

I can get it to you once i get my car back from being totalled ah, all it has is braces on each side as support structure, mine hasn't cracked yet i think this design is way more durable

Totalled??

[Jbonly21]

Originally Posted by deeldoo

Yes it could, mine cracked within 2 weeks of ownership.

MPE V1 is a shitstain.

Go into dealer, make friends, tell him exhaust cracked, they will replace it with V2 MPE.

At least for me they did and even replaced my carbon fiber tips.

Yeah, I try two dealerships, didn't get lucky.

[deeldoo]

Originally Posted by AlejoEvo

Totalled??

I mean it probably isn't totalled but i crashed it so after it potentially gets repaired

[AlejoEvo]

Originally Posted by deeldoo

I mean it probably isn't totalled but i crashed it so after it potentially gets repaired

Damn! I hope you can repair it!

[Jbonly21]

Had some fun yesterday in the canyons. Now I am going to be needing tires soon. I am currently running
255 35 fronts and 295 30 rear on H&R ss springs and 12mm rear and 15mm front spacers , is there a better figment I could run?

[AlejoEvo]

Originally Posted by Jbonly21

Had some fun yesterday in the canyons. Now I am going to be needing tires soon. I am currently running
255 35 fronts and 295 30 rear on H&R ss springs and 10 mm spacers , is there a better figment I could run?

What tire are you using?

[Jbonly21]

Originally Posted by AlejoEvo

What tire are you using?

Hankook V12

[Jbonly21]

Owner this car has been so much fun so far, even started a new habit, canyon driving.

[Jbonly21]

Do anyone know if I can run my current tires size in Michelin?

[AlejoEvo]

Originally Posted by Jbonly21

Do anyone know if I can run my current tires size in Michelin?

Michelin tires come in you specs. I'm running PS4.