BM3 Burble Aggression Question

modiddy24 · 07-10-2019, 06:03 PM

So I've been messing around with the burble settings to try and get the sound I like. I've gone from aggression 3 to 8.5. Does the aggression setting mainly change higher rpm burbles to have louder cracks and pops? I feel like the lower rpms (3000k and below) all sound the same regardless of aggression level. I want the low grumble sound across the board. Similar to the GTS burble settings. Don't want the loud cracks and pops. Thoughts?

joooiiiiii · 07-10-2019, 06:10 PM

There's a BM3 thread but I was too lazy to link it. Anyways, I think you gotta try and lengthen or shorten it and adjust the aggressiveness as well--you might get the outcome you want that way. However, you might be correct that at the lower RPMs it all just sounds the same. I feel like it isn't but I left mine on stock (ZCP) and it sounds good to me that way.

bobbyh907 · 07-10-2019, 08:54 PM

I miss the actual old burble sound. Someone made the aggressive gunshot noises and everyone ate it up and it hasn't sounded the same since. I had MHD on my old N55 135i and that was a true burble. Similar to this minus the loud pops

mike@x-ph.com · 07-11-2019, 12:31 AM

Quote:

Originally Posted by TT DAWG

So I've been messing around with the burble settings to try and get the sound I like. I've gone from aggression 3 to 8.5. Does the aggression setting mainly change higher rpm burbles to have louder cracks and pops? I feel like the lower rpms (3000k and below) all sound the same regardless of aggression level. I want the low grumble sound across the board. Similar to the GTS burble settings. Don't want the loud cracks and pops. Thoughts?

I might be mistake but i think you do have GTS burble mode as a preset in the interface

modiddy24 · 07-11-2019, 05:46 AM

Quote:

Originally Posted by mike@x-ph.com

Quote:

Originally Posted by TT DAWG

So I've been messing around with the burble settings to try and get the sound I like. I've gone from aggression 3 to 8.5. Does the aggression setting mainly change higher rpm burbles to have louder cracks and pops? I feel like the lower rpms (3000k and below) all sound the same regardless of aggression level. I want the low grumble sound across the board. Similar to the GTS burble settings. Don't want the loud cracks and pops. Thoughts?

I might be mistake but i think you do have GTS burble mode as a preset in the interface

Quote:

Originally Posted by mike@x-ph.com

Quote:

Originally Posted by TT DAWG

So I've been messing around with the burble settings to try and get the sound I like. I've gone from aggression 3 to 8.5. Does the aggression setting mainly change higher rpm burbles to have louder cracks and pops? I feel like the lower rpms (3000k and below) all sound the same regardless of aggression level. I want the low grumble sound across the board. Similar to the GTS burble settings. Don't want the loud cracks and pops. Thoughts?

I might be mistake but i think you do have GTS burble mode as a preset in the interface

I haven't seen it. Only notice OEM, Custom, OTS, OFF.

matty088 · 07-11-2019, 07:22 AM

Quote:

Originally Posted by bobbyh907

I miss the actual old burble sound. Someone made the aggressive gunshot noises and everyone ate it up and it hasn't sounded the same since. I had MHD on my old N55 135i and that was a true burble. Similar to this minus the loud pops

thats not oem sounding at all. no offense but i think thats what we looking to get away from. confused

mike@x-ph.com · 07-11-2019, 11:27 AM

Quote:

Originally Posted by TT DAWG

I haven't seen it. Only notice OEM, Custom, OTS, OFF.

Check with PTF

bobbyh907 · 07-12-2019, 08:52 PM

Quote:

Originally Posted by matty088

thats not oem sounding at all. no offense but i think thats what we looking to get away from. confused

Never said it was OEM sounding? Also never said it's what you wanted?

I said it was the sound I missed. I don't care for the gunshot bangs that the "burble" has turned into. I was simply stating my opinion. Also here is a better video.

blockdoc · 07-13-2019, 12:34 AM

Quote:

Originally Posted by matty088

Quote:

Originally Posted by bobbyh907

I miss the actual old burble sound. Someone made the aggressive gunshot noises and everyone ate it up and it hasn't sounded the same since. I had MHD on my old N55 135i and that was a true burble. Similar to this minus the loud pops

thats not oem sounding at all. no offense but i think thats what we looking to get away from. confused

Sounds like something Is loose and rattling around lol

Fast4d · 07-13-2019, 01:58 PM

technology is amazing. you no longer need coffee can sized exhaust tips to make that racket.

f80_sturmgewehr · 07-14-2019, 05:02 PM

I was told once titanium mufflers increase the pitch of the s55 burbles

07-10-2019, 06:03 PM	#1
modiddy24 Private 16 Rep 66 Posts Drives: 2015 M4 Join Date: Mar 2018 Location: Atlanta iTrader: (0)	BM3 Burble Aggression Question So I've been messing around with the burble settings to try and get the sound I like. I've gone from aggression 3 to 8.5. Does the aggression setting mainly change higher rpm burbles to have louder cracks and pops? I feel like the lower rpms (3000k and below) all sound the same regardless of aggression level. I want the low grumble sound across the board. Similar to the GTS burble settings. Don't want the loud cracks and pops. Thoughts?
	Appreciate 0 Tweet Quote

07-10-2019, 06:10 PM	#2
joooiiiiii Lieutenant 439 Rep 418 Posts Drives: 2018 BMW M3 ZCP Join Date: Oct 2017 Location: California iTrader: (0)	There's a BM3 thread but I was too lazy to link it. Anyways, I think you gotta try and lengthen or shorten it and adjust the aggressiveness as well--you might get the outcome you want that way. However, you might be correct that at the lower RPMs it all just sounds the same. I feel like it isn't but I left mine on stock (ZCP) and it sounds good to me that way.
	Appreciate 0 Quote

07-10-2019, 08:54 PM	#3
bobbyh907 Private 34 Rep 66 Posts Drives: 2015 M3 Alpine White Join Date: Jul 2018 Location: Alaska iTrader: (0)	I miss the actual old burble sound. Someone made the aggressive gunshot noises and everyone ate it up and it hasn't sounded the same since. I had MHD on my old N55 135i and that was a true burble. Similar to this minus the loud pops
	Appreciate 0 Quote

07-13-2019, 01:58 PM	#10
Fast4d Captain 267 Rep 885 Posts Drives: 325 Join Date: Jan 2012 Location: So cal iTrader: (0)	technology is amazing. you no longer need coffee can sized exhaust tips to make that racket. __________________ SAFE-GUARD tire/wheel/windshield/paint protection is a FRAUD! do not waste your money!
	Appreciate 0 Quote

07-14-2019, 05:02 PM	#11
f80_sturmgewehr Private 75 Rep 82 Posts Drives: 2017 F80 M3 Join Date: Mar 2018 Location: Corona Del Mar, CA iTrader: (1)	I was told once titanium mufflers increase the pitch of the s55 burbles
	Appreciate 0 Quote