Coby Wheel
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Cosmetic and Lighting Modifications

Post Reply
 
Thread Tools Search this Thread
      08-19-2017, 07:01 PM   #1
stilljester
Private First Class
95
Rep
119
Posts

Drives: E34M5T, E70M, F80
Join Date: Jan 2013
Location: Airplanes and Hotel Rooms

iTrader: (5)

DIY / How To: BMW OE Fire Extinguisher

BMW Parts Needed
OE Fire Extinguisher Kit PN: 52 10 0 441 113

Tools:
10mm socket with ¼” drive (short handle)
Flashlight (Helpful to see under the seat)
Blanket to kneel on / prevent scratches to your paint while installing

Step 1:
Raise the seat to the maximum upward setting possible. Also, tilt the base backwards to the maximum setting possible once raised. Open kit and layout parts for installation.


Step 2:
Using your flashlight look under the front of your seat and identify the mounting bolt holes as shown below.



Step 3:
Remove fire extinguisher from the bracket and mount the plastic bracket, buckle side out, using the LHD or RHD bolt holes as appropriate for your vehicle.


Step 4:
Using the 10mm socket start each bolt a couple threads. Once all have been started, tighten each completely to 3.5Nm. (Do not over torque as seat base in not threaded.)


Step 5:
Remount the fire extinguisher.


Step 6:
Enjoy and hope you'll never need to use it.

Last edited by stilljester; 08-20-2017 at 04:56 PM.. Reason: Added torque value to Step 4
Appreciate 4
      08-19-2017, 07:20 PM   #2
Who's on first
Brigadier General
Who's on first's Avatar
United_States
2460
Rep
3,801
Posts

Drives: A-10C
Join Date: Feb 2015
Location: Maryland

iTrader: (2)

Very nice write up!
Appreciate 0
      08-20-2017, 04:12 PM   #3
jmciver
///M SubDriver
jmciver's Avatar
United_States
1820
Rep
2,779
Posts

Drives: 2017 M3, 2020 X7 40i
Join Date: Jul 2016
Location: DMV

iTrader: (0)

Garage List
2017 BMW M3  [10.00]
2020 BMW X7  [0.00]
2019 BMW X3  [0.00]
2009 BMW 128i  [0.00]
I have been thinking about doing this for a while but was not 100% sure of the fitment on the F8X seats - great work! A few quick questions...

1. Why did you install it on the passenger side and not the driver side, where it is more easily accessible if needed?

2. Did you lose any motion with the seat due to interference from the extinguisher?

3. Where did you get your kit from and how much?
__________________
///M3 COMPETITION 6MT - 2017 F80 Smoked Topaz Metallic
BM3 / MP-HAS / GC Camber Plates / Carbonstructure Interior
X7 XDrive 40i ///M-SPORT - 2020 G07 Arctic Grey Metallic

X3 XDrive 30i - 2019 G01 Mineral White (wife's) / 128i 6MT - 2009 E82 Jet Black (son's)
Appreciate 0
      08-20-2017, 04:34 PM   #4
MasterP
Colonel
720
Rep
2,342
Posts

Drives: All the M's
Join Date: Aug 2012
Location: Where do you want me?

iTrader: (8)

If the holes aren't threaded then put some rivet nuts in there.
Appreciate 0
      08-20-2017, 04:51 PM   #5
stilljester
Private First Class
95
Rep
119
Posts

Drives: E34M5T, E70M, F80
Join Date: Jan 2013
Location: Airplanes and Hotel Rooms

iTrader: (5)

Quote:
Originally Posted by jmciver View Post
I have been thinking about doing this for a while but was not 100% sure of the fitment on the F8X seats - great work! A few quick questions...

1. Why did you install it on the passenger side and not the driver side, where it is more easily accessible if needed?

2. Did you lose any motion with the seat due to interference from the extinguisher?

3. Where did you get your kit from and how much?

RE 1) It's designed / intended to be mounted below the passenger seat.

RE 2) No, it mounts high enough under the seat that the range of motion is not limited. (If you have manual seats you will need to use the new handles provided in the kit.)

RE 3) Ordered it from IND; shipping is slow given the hazard classification of the product.
Appreciate 0
      08-20-2017, 04:54 PM   #6
stilljester
Private First Class
95
Rep
119
Posts

Drives: E34M5T, E70M, F80
Join Date: Jan 2013
Location: Airplanes and Hotel Rooms

iTrader: (5)

Quote:
Originally Posted by MasterP View Post
If the holes aren't threaded then put some rivet nuts in there.
I suppose if you wanted to enlarge the holes and add a rivet nut you could. However, the existing holes and hardware have been sized appropriately for the job and work well. Just don't use a 1/2" drive breaker bar to tighten.

I'll edit my post to add the correct torque value now.

Last edited by stilljester; 08-20-2017 at 07:35 PM.. Reason: grammer
Appreciate 0
      08-20-2017, 07:25 PM   #7
jmciver
///M SubDriver
jmciver's Avatar
United_States
1820
Rep
2,779
Posts

Drives: 2017 M3, 2020 X7 40i
Join Date: Jul 2016
Location: DMV

iTrader: (0)

Garage List
2017 BMW M3  [10.00]
2020 BMW X7  [0.00]
2019 BMW X3  [0.00]
2009 BMW 128i  [0.00]
Quote:
Originally Posted by stilljester View Post
RE 1) It's designed / intended to be mounted below the passenger seat.

RE 2) No, it mounts high enough under the seat that the range of motion is not limited. (If you have manual seats you will need to use the new handles provided in the kit.)

RE 3) Ordered it from IND; shipping is slow given the hazard classification of the product.
Thanks for the info. I was recently feeling around under the driver seat (while at a stop light) and felt what appeared to be some mounting holes. Given a preference though, if it will work I would rather put it under the driver seat.

I just went to IND's site and only saw the OEM GTS fire extinguisher/bracket. Maybe they don't offer it anymore for the reasons you mentioned.
__________________
///M3 COMPETITION 6MT - 2017 F80 Smoked Topaz Metallic
BM3 / MP-HAS / GC Camber Plates / Carbonstructure Interior
X7 XDrive 40i ///M-SPORT - 2020 G07 Arctic Grey Metallic

X3 XDrive 30i - 2019 G01 Mineral White (wife's) / 128i 6MT - 2009 E82 Jet Black (son's)
Appreciate 0
      08-20-2017, 10:54 PM   #8
MasterP
Colonel
720
Rep
2,342
Posts

Drives: All the M's
Join Date: Aug 2012
Location: Where do you want me?

iTrader: (8)

Quote:
Originally Posted by stilljester View Post
I suppose if you wanted to enlarge the holes and add a rivet nut you could. However, the existing holes and hardware have been sized appropriately for the job and work well. Just don't use a 1/2" drive breaker bar to tighten.

I'll edit my post to add the correct torque value now.
Well if the hole you used don't have threads then the bolts aren't really secured.

Or you could even use a plastic rivet or push clip.
Appreciate 0
      04-28-2018, 02:29 PM   #9
timhatimay
Lieutenant
timhatimay's Avatar
129
Rep
559
Posts

Drives: ///M3
Join Date: Jan 2009
Location: NYC

iTrader: (1)

Garage List
2018 BMW M3  [0.00]
2009 135i  [0.00]
I was able to find the extinguisher on eBay, by searching PN. I tried a few sellers that got rejected shipping because of restrictions shipping the actual extinguisher, but was successful with a German seller. Just ask them first if they can ship.

I mounted it on the driver side using the RHD holes and it fit like a charm. I like the idea of keeping it close by.

It's a cool subtle mod! I will post pics soon, although it looks just like above. Note that starting the first screw is a pain, but once you get the first the rest are easy. Since they aren't threaded you do need to apply some force up. Previous gens did require tapping the holes, but that step seems to be removed, and it felt pretty solid and sturdy.

Tim
Appreciate 0
      04-30-2018, 03:58 AM   #10
1QuikWS6
No 55mph
1QuikWS6's Avatar
1616
Rep
8,473
Posts

Drives: F32 435ix MSport
Join Date: Jul 2009
Location: Blitzburgh, PA

iTrader: (113)

Garage List
Quote:
Originally Posted by MasterP View Post
Well if the hole you used don't have threads then the bolts aren't really secured.

Or you could even use a plastic rivet or push clip.
Screws/bolts supplied in kit are self-tapping and sized correctly for the holes in seat
__________________
F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
Appreciate 0
      07-06-2019, 07:35 AM   #11
TheEnrique
Colonel
TheEnrique's Avatar
United_States
522
Rep
2,333
Posts

Drives: F90 M5
Join Date: May 2006
Location: Bergen County, NJ

iTrader: (37)

Garage List
2020 M5  [0.00]
2012 M3 Coupe  [0.00]
2017 M4 Convertible  [0.00]
2013 X5M  [0.00]
2015 F82 M4  [0.00]
Mine did not have the self taping screws any idea of the size?
Appreciate 0
      08-06-2019, 05:02 PM   #12
stilljester
Private First Class
95
Rep
119
Posts

Drives: E34M5T, E70M, F80
Join Date: Jan 2013
Location: Airplanes and Hotel Rooms

iTrader: (5)

Quote:
Originally Posted by TheEnrique View Post
Mine did not have the self taping screws any idea of the size?

I actually don't remember them to be self-tapping; I think they were just standard M10 flanged bolts. The metal on on the seat bottom is thin enough they just threaded in.
__________________
F80 Santorini / Amaro - Dinan Stage 3 - Awron - OE EU Mirrors - OE EU Visors - OE Roof Rack - Tri-Stitch Leather Shift Knob & E-Brake Boot - OE Competition Belts - OE Sunglasses Holder - OE Fire Extinguisher - OE First Aid Kit - OE Emergency Triangle - UCP - OE Stainless Steel Pedals - Bimmertech Comfort Access - BP Engineering Ti Charge Pipes
Appreciate 0
      08-06-2019, 06:39 PM   #13
aBMWfan
Banned
United_States
1193
Rep
3,670
Posts

Drives: 08' M3/'15 M4/ '06 M3/ '09 M3/
Join Date: Feb 2016
Location: Thousand Oaks

iTrader: (11)

Does anyone have this extinguisher for sale? Lmk
Appreciate 0
      08-07-2019, 11:45 AM   #14
TheEnrique
Colonel
TheEnrique's Avatar
United_States
522
Rep
2,333
Posts

Drives: F90 M5
Join Date: May 2006
Location: Bergen County, NJ

iTrader: (37)

Garage List
2020 M5  [0.00]
2012 M3 Coupe  [0.00]
2017 M4 Convertible  [0.00]
2013 X5M  [0.00]
2015 F82 M4  [0.00]
Quote:
Originally Posted by aBMWfan View Post
Does anyone have this extinguisher for sale? Lmk
I might be interested in selling for the right offer.
Appreciate 0
      08-13-2019, 10:04 AM   #15
Chile1
Private First Class
Chile1's Avatar
43
Rep
142
Posts

Drives: 2016 BMW X5M & 2018 JLUR
Join Date: Aug 2019
Location: Missouri

iTrader: (0)

Garage List
2016 BMW X5 ///M  [10.00]
i was looking to do the same for my BMW but i have a 2016 X5M (F85). i'm having a hard time finding the mounting brackets as well as the mini fire extinguisher state-side. Most vendors do not ship to the USA.

This is the part i'm looking for:
Name:  fire extinguisher.JPG
Views: 3113
Size:  41.1 KB
Name:  bracket.jpg
Views: 2926
Size:  35.2 KB
__________________
Current: 2016 X5 ///M Donington/Mugello Red
Previous: 2010 X5 ///M, 2006 X5 4.4i & 2003 X5 3.0i

"BMW El Placer de Conducir"

Last edited by Chile1; 08-13-2019 at 10:27 AM..
Appreciate 1
9M711232.50
      09-18-2019, 10:19 PM   #16
stilljester
Private First Class
95
Rep
119
Posts

Drives: E34M5T, E70M, F80
Join Date: Jan 2013
Location: Airplanes and Hotel Rooms

iTrader: (5)

Quote:
Originally Posted by Chile1 View Post
Most vendors do not ship to the USA.
Yes, this mainly has to do with the classification paperwork needed to properly ship a fire extinguisher. I would suggest reaching out to a company like IND Distribution (LINK) to ask if it's something they can order. (Just a fair warning it will be expensive.)
__________________
F80 Santorini / Amaro - Dinan Stage 3 - Awron - OE EU Mirrors - OE EU Visors - OE Roof Rack - Tri-Stitch Leather Shift Knob & E-Brake Boot - OE Competition Belts - OE Sunglasses Holder - OE Fire Extinguisher - OE First Aid Kit - OE Emergency Triangle - UCP - OE Stainless Steel Pedals - Bimmertech Comfort Access - BP Engineering Ti Charge Pipes
Appreciate 0
      10-23-2019, 07:51 PM   #17
TheEnrique
Colonel
TheEnrique's Avatar
United_States
522
Rep
2,333
Posts

Drives: F90 M5
Join Date: May 2006
Location: Bergen County, NJ

iTrader: (37)

Garage List
2020 M5  [0.00]
2012 M3 Coupe  [0.00]
2017 M4 Convertible  [0.00]
2013 X5M  [0.00]
2015 F82 M4  [0.00]
I am selling one of these if anyone is interested.
Appreciate 0
      10-24-2019, 12:16 AM   #18
Deleted-User
Private First Class
United_States
72
Rep
145
Posts

Drives: N/A
Join Date: Dec 2017
Location: N/A

iTrader: (1)

Quote:
Originally Posted by TheEnrique View Post
I am selling one of these if anyone is interested.
Sent you a PM.
Appreciate 0
      10-24-2019, 08:03 AM   #19
TheEnrique
Colonel
TheEnrique's Avatar
United_States
522
Rep
2,333
Posts

Drives: F90 M5
Join Date: May 2006
Location: Bergen County, NJ

iTrader: (37)

Garage List
2020 M5  [0.00]
2012 M3 Coupe  [0.00]
2017 M4 Convertible  [0.00]
2013 X5M  [0.00]
2015 F82 M4  [0.00]
Quote:
Originally Posted by netinvader View Post
Sent you a PM.
replied.
Appreciate 0
      02-13-2021, 06:44 AM   #20
SteveChester
Brigadier General
SteveChester's Avatar
United Kingdom
2472
Rep
4,652
Posts

Drives: F82 M4
Join Date: Oct 2009
Location: Chester

iTrader: (0)

Garage List
2014 BMW F82 M4  [0.00]
@stilljester I purchased the fire extinguisher from my local UK BMW garage but it didn't have the bracket in - when queried the bracket isn't available for the M4 seats - don't think this is true though!

Do you know how can I obtain the bracket ?
__________________
Steve Roberts UK
F82 M4
I'm running the 2024 London Marathon for the British Forces Foundation - https://www.justgiving.com/fundraising/sr5/
Appreciate 0
      02-25-2021, 07:13 PM   #21
B-HQC
Enlisted Member
9
Rep
45
Posts

Drives: BMW
Join Date: Jun 2017
Location: South Pacific

iTrader: (0)

Would this part fit a G12 7er? Where would I be able to get my hands on one in the US?
Appreciate 0
      03-24-2021, 03:43 PM   #22
PARTS@STBMW
PARTS@STBMW's Avatar
2678
Rep
7,300
Posts

Drives: BMW
Join Date: Nov 2011
Location: Camarillo, CA

iTrader: (4)

Quote:
Originally Posted by TheEnrique View Post
I am selling one of these if anyone is interested.
Still available? Have a client looking for one.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:39 PM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST