12-21-2018, 09:41 AM | #221 |
Private
227
Rep 95
Posts |
Have seen some amazing set ups here.
Think I'm close but want to get some feedback if possible. For a M4, and I have had all previous cars with aggressive[IMG][/IMG] fitment, coils and slightly stiffer spring rates. (rear and front of my old car... coils, rear lower and upper Adj arms, camber plate and stock body panels minus a light fender roll.. 20x 9.5 and 20x10.5 daily driven..) For the M4.. option 1 19x9.5 + 35 19x10.5 + 22 Option 2 20x9 + 20 20x11 + 25 I don't mind a slight stretch on tires to accommodate the lower offset and fitment... Will any of these options work??
__________________
|
Appreciate
0
|
12-22-2018, 04:02 AM | #223 |
Lieutenant
138
Rep 592
Posts
Drives: E90 M3/E92 M3 ZCP
Join Date: Jan 2015
Location: California
|
Looking to run 18x10 18x11 with 275/305 tire setup without rubbing.
What is the ideal offset to run for front and rear? Any benefits running 18x9.5 over 18x10 for the front? What is the lowest offset I can run on 18x10 18x11 without rubbing on 275/305 setup? Planning on being lowered on CO's as well. |
Appreciate
0
|
01-03-2019, 04:23 PM | #224 |
Sergeant
853
Rep 2,559
Posts |
Any chance you could post the same info for the competition and CS wheels, sizing, tires, color options?
__________________
'22 F92 M8 Competition Coupe - Frozen Brilliant White | 8 Speed DCT | Sakhir Orange/Black Full Leather | M Perf CF Exterior Package | M Perf. CF Exhaust | BBS FI-R 21" Wheels | |
Appreciate
0
|
01-19-2019, 08:05 PM | #225 |
Private
7
Rep 83
Posts |
Tire size please ?
20x9.5 ET 22 20x10 ET40 or 20x11 ET35 I have KW HAS on the M3. I don't want to rub and I don't like stretched tires. What do you suggest ? Thanks !! |
Appreciate
0
|
01-22-2019, 10:50 AM | #226 | |
Brigadier General
2193
Rep 4,124
Posts |
Quote:
20x10 & 20x11 265/30 & 285/30 20x 9.5 & 20x11 265/30 & 295/30 Just to have same stretch front & rear Edit: in both cases you gonna have some stretch....
__________________
|
|
Appreciate
0
|
01-23-2019, 09:43 AM | #227 |
Enlisted Member
10
Rep 42
Posts |
|
Appreciate
0
|
01-25-2019, 07:13 PM | #229 | |
Major
627
Rep 1,240
Posts |
Offsets
Quote:
__________________
2016 Hellrot F80 M3|JRZ RS Pro with Swift Springs 550/750 spring rates l AP Radical 5000R 9668/9449 lSpiegler SS LinesI DS1.11I Eisenmann DP|MPE Catback|18" Forgeline GS1R 18x10 et 22 and 18x11 et 44 NT01 275/35/18 and 305/35/18| Forgeline GTD1 18x10et43 SquarelM Performance Lip/Splitter|IND aesthetic mods|Dinan Toe Link|Fall Line mono ball conversion kit and upper link kit| Aim Solo 2DL Smarty Cam|Simpson Hybrid|Stilo Offshore helmet.
|
|
Appreciate
1
JustAnothaM4924.50 |
02-24-2019, 10:11 AM | #230 |
Private First Class
80
Rep 165
Posts |
Question for the brain trust here. I have a set of VMRs that came off my wife's old F31 that I want to re-use as a winter setup on an F80.
18x8.5 ET35 18x9.5 ET45 Looks like the offsets are all wrong for the F80 but I can correct that with spacers? Or am I trying too hard to make these work? I think I can safely run 255/40 (not 255/45) R18 all around. Thanks in advance. Last edited by arrivederci; 02-24-2019 at 11:40 PM.. |
Appreciate
0
|
02-24-2019, 10:49 AM | #231 |
Private First Class
55
Rep 193
Posts |
For the front, 12mm spacers would have the outside as same as stock. Would have to check for the rear, it is 14 mm if you had 8.5et35 in the rear like I do. I did some comparisons using the 1010tires calculator.
Tire size is taller than stock, but might be fine on stock suspension. |
Appreciate
0
|
02-24-2019, 11:39 PM | #232 | |
Private First Class
80
Rep 165
Posts |
Quote:
Having 2nd thoughts - can't find unstudded Hakka's in that size for 18s. Can get 255/35 19s tho. Might have to pony up for new 19s in correct offset w/o spacers. |
|
Appreciate
0
|
02-25-2019, 05:30 PM | #233 |
Private First Class
55
Rep 193
Posts |
I am running 255/35/19 PA4 on my 340 and trying too figure if change for next winter. Would really like Hakka 9 w/o studs, hopefully before next winter. I have 19x9 et 35 with 10mm spacers that work fine on my M3 I would put on.
|
Appreciate
0
|
03-07-2019, 01:02 PM | #235 |
Brigadier General
2193
Rep 4,124
Posts |
Yes... I had 11" ET25 with 285/30 PSS
__________________
|
Appreciate
0
|
03-09-2019, 02:03 PM | #236 |
New Member
2
Rep 21
Posts |
|
Appreciate
1
JustAnothaM4924.50 |
03-09-2019, 07:19 PM | #237 |
Private First Class
80
Rep 165
Posts |
Went with Apex EC-7, 19x9.5 ET22 for the winter setup. The Hakka R3 big blocky treads squirm and slip like mad on dry roads. Fun, although I hope I don't burn through them before the next snow!
|
Appreciate
0
|
03-10-2019, 10:03 AM | #239 |
Private First Class
311
Rep 152
Posts |
Having an issue with my fronts rubbing on my Coilovers (KW V3)
Wheels are 20x10 +16 w/ 265/30/20 PS4S The inner barrel was rubbing on the spanner nut, and tire rubbing the spring. Threw 5mm spacers on and it is still rubbing I haven't got an alignment done yet (but my previous wheels were pretty close to the same spec (only in 19s) and I had no issues. Any ideas? Wheel co. doesn't think they should be rubbing either. Is my tire too wide? |
Appreciate
0
|
03-10-2019, 01:17 PM | #240 | |
Private First Class
80
Rep 165
Posts |
Quote:
|
|
Appreciate
0
|
03-11-2019, 02:26 PM | #242 |
Brigadier General
2193
Rep 4,124
Posts |
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|