11-28-2019, 01:41 PM | #1 |
Captain
455
Rep 844
Posts |
Happy thanksgiving to you, your familes and loved ones!
Sorry for the poor quality photos. I only had a few mins with the car. It's at the shop getting a aluminum M3 CS style hood painted/installed, paint correction, expel PPF, and ceramic pro coating. I will take better photos when I pickup the car and post it. For now this is what we have.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ Last edited by papasmurf_m3; 11-28-2019 at 05:58 PM.. |
11-28-2019, 01:43 PM | #2 |
Captain
455
Rep 844
Posts |
WTH? Why are these photos upside down? Sorry for the upload fail.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
11-28-2019, 03:56 PM | #3 |
Colonel
3234
Rep 2,160
Posts |
I think with a drop they will look fire. With stock suspension, they look a bit much.
When I was stock I went with 7.5mm spacers and it looked just right, once dropped I went to 10mm all around and it looks perfect. |
Appreciate
1
papasmurf_m3454.50 |
11-28-2019, 04:00 PM | #4 | |
Captain
455
Rep 844
Posts |
Quote:
Do you know if the stock springs are made by eibach? Because the car came with them.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
|
Appreciate
0
|
11-28-2019, 05:11 PM | #5 |
Private First Class
257
Rep 165
Posts |
Without a drop it looks different. I have 15MM/f and 12MM/r on MP HAS. It’s flush, no rub... rock chips on rear quarter panels can be annoying so PPF is a must.
https://f80.bimmerpost.com/forums/sh...191427&page=98 |
Appreciate
1
papasmurf_m3454.50 |
11-28-2019, 05:59 PM | #6 |
Captain
455
Rep 844
Posts |
Ya, I think im going to lower it on some springs and drop a size down to 10mm on the rear spacers.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
11-28-2019, 06:00 PM | #7 | |
Captain
455
Rep 844
Posts |
Quote:
You mean the PPF on the lower part of the rear fender flares? My car came with that already on. I'm just redoing the front end and sideskirts.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
|
Appreciate
0
|
11-28-2019, 06:41 PM | #8 | ||
Major
852
Rep 1,215
Posts |
Quote:
|
||
Appreciate
0
|
11-28-2019, 07:04 PM | #9 |
Captain
455
Rep 844
Posts |
I was thinking of putting 295 or maybe 305 eventually. but, I will need to see how it looks with those sizes later. For now. I just ordered 10mm for the rears. I think the 12mm is too big.
As for the PPF. I didn't know stock came with some PPF. Let me talk to my installer monday.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
11-29-2019, 02:59 AM | #10 |
Captain
605
Rep 641
Posts |
I run 12mm front and 10mm rear spacers. I don't like when the tire sticks out when i look from straight above the wheel arch. I'm dropped on H&R sleeve kit. The whole car is wrapped in Stek PPF.
|
Appreciate
1
papasmurf_m3454.50 |
11-29-2019, 06:44 AM | #11 |
Second Lieutenant
141
Rep 258
Posts |
I run 10/12 on 666M and it's perfect.
__________________
2019 M4 ZCP / Yas Marina Blue
M-Performance Front Splitters / M-Performance Rear Spoiler / Rieger Tuning Side-skirt Extensions / Carbonwurks Rear Diffuser / Alcantara M-Performance Interior Accessories |
Appreciate
1
papasmurf_m3454.50 |
11-29-2019, 03:20 PM | #12 |
Captain
455
Rep 844
Posts |
Ok, so I will swap out my rears for the 10mm and install the EMD lowering springs.
I think it should look good. I will post some pics after I pickup my car and the weather clears up. These are just preliminary shots. I wont be driving it like this.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
11-29-2019, 03:20 PM | #13 |
Captain
455
Rep 844
Posts |
Your car looks tits bro. Thank you for contributing.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
11-29-2019, 05:38 PM | #14 |
Second Lieutenant
152
Rep 269
Posts |
I'm curious how 12/10 looks. I have 15/12 with stock springs. Think it looks amazing. Still haven't pulled the trigger on springs....
I'm in San Diego as well. Would love to see yours in person if you're close. |
Appreciate
1
papasmurf_m3454.50 |
11-29-2019, 05:40 PM | #15 |
Banned
4997
Rep 4,139
Posts |
Hey Im running 10mm all around on the 437m with EMD springs. I rubbed without the rear perch spacer in the back so make sure not to skip that. I also run 295.30/19 in the rear. no rub with the flush drop. will post a pic for you if this app cooperates.
|
Appreciate
1
papasmurf_m3454.50 |
11-29-2019, 06:15 PM | #16 |
Captain
2639
Rep 640
Posts |
I have 12 front / 10 rear and I really like it (stock suspension that I may change later). Last edited by Jbrown7403; 11-29-2019 at 06:42 PM.. |
Appreciate
1
papasmurf_m3454.50 |
11-29-2019, 07:14 PM | #17 |
Banned
4997
Rep 4,139
Posts |
So difficult to post pics I swear
|
Appreciate
1
papasmurf_m3454.50 |
11-30-2019, 12:59 PM | #18 |
Captain
455
Rep 844
Posts |
15-12 Sounds nice with stock wheels. Ya I'm down. Are there any good meets in SD btw? I still don't really know.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
Appreciate
0
|
12-01-2019, 12:55 PM | #19 | ||
Captain
956
Rep 624
Posts |
Quote:
|
||
Appreciate
1
papasmurf_m3454.50 |
12-01-2019, 11:57 PM | #20 | |||
Captain
455
Rep 844
Posts |
Quote:
I definitely will. Should be in about another week at least till get the car back.
__________________
60-130 mph 6.72 secs
1/2 mile trap speed 158 mph ecutek - bend calibration pro tune - flex fuel - mpe - stock turbos - oem+ |
|||
Appreciate
0
|
12-12-2019, 08:10 AM | #21 |
#LSBM3
1420
Rep 1,973
Posts
Drives: 2016 BMW M3
Join Date: Feb 2015
Location: Oregon / Florida
iTrader: (4)
Garage List 1984 BMW R65 [0.00]
2020 Ford F-150 XLT ... [0.00] 2003 Mitsubishi Evo ... [0.00] 2016 M3 Competition ... [10.00] |
That's my set up 12mm front/10mm rear on OEM suspension. It's perfect and should have been this way from the manufacturer.
__________________
/// M3 |
Appreciate
0
|
12-17-2019, 04:03 PM | #22 |
Brigadier General
1397
Rep 3,152
Posts |
666 and 18mm up front, 15mm in rear and I'm fuckin flush.
__________________
|
Appreciate
2
papasmurf_m3454.50 lavon2.00 |
Post Reply |
Bookmarks |
|
|