Stud Conversion kit reccomendations

[JayJM4]

Trying to do a stud conversion went with Titan TS5 wheels what are some of you guys running?

[M3SQRD]

I use the BimmerWorld bullet-nose 72 mm and 82 mm studs on my f82, e92 M3s and f22 240ix. I’ve had no issues with them for more than a decade on my e92 M3s and eight years on my f82 (replace every 1-2 track seasons depending on number of track days).

https://www.bimmerworld.com/BimmerWo...d-Package.html

[Overlimit]

Here are some that I've found. For the nuts (and locks), just make sure you're selecting the right size (M14x1.25 or M14x1.5) which would depend on which stud you go for. For a track focused vehicle you want stainless steel. There isn't a clear consensus on whether to use Blue Loctite or not, and when to use anti-seize on titanium nuts/locks.

Studs:

• MRG Titanium Stud Conversion (Allows you to use M14x1.5 Nuts)
• Motorsports Hardware Stud Conversion (Allows you to use M14x1.5 Nuts)
• Raceseng Titanium Stud Conversion (Requires M14x1.25 Nuts)
• MSI Bullet Nose Stud Conversion (Requires M14x1.25 Nuts)

Locking Nuts:

• Project Kics
• Monster Lug Nut Locks + Nuts
• Gorilla Lock Nuts
• HonesTi Lock Nuts
• Raceseng Nuts (M14x1.25) / (M14x1.5)

[tom @ eas]

Originally Posted by JayJM4

Trying to do a stud conversion went with Titan TS5 wheels what are some of you guys running?

We use the Macht Schnell Competition Stud Kits exclusively on our builds.

https://europeanautosource.com/produ...kit-bmw-m12x15