4 pin Crank hub (brand used)

Rod_knee · 02-25-2021, 11:26 AM

BIMMERPOST / Classifieds

Asking Price:

USD 680.00

Shipping Costs Included

Item Interest

I have a 4 pin crank hub for sale. Back story on why I'm selling this. I bought a used 17 f80 from auction not knowing the history of the vehicle. Had a major oil leak took it in to SSR performance in SoCal decided to upgrade the crank hub (again didn't know I had an upgraded CH) they gave me the CH and said it's still good. There's not crazy abrasion on it just looking to elevate the cost from what I had work done to my f80 so my wife doesn't kill me lol. Willing to ship as well.

Bluer2 · 02-25-2021, 01:34 PM

what? they changed out your crank hub even though you already had an upgraded crank hub and now you are selling a used 4 pin crank hub? did i read that right? LOL

aliiin · 02-25-2021, 01:52 PM

This kind of doesn't make any sense. Why on earth would any shop do that?

If a shop uncovers that the hub is already done, why would they re-do it?

You got took for a ride, or something is not adding up.

taz2ko0 · 02-25-2021, 02:43 PM

Quote:

Originally Posted by aliiin

This kind of doesn't make any sense. Why on earth would any shop do that?

If a shop uncovers that the hub is already done, why would they re-do it?

You got took for a ride, or something is not adding up.

Ditto

NickyC · 02-25-2021, 02:47 PM

Wat

OtisF80M3 · 02-25-2021, 03:05 PM

Well, can you even tell if it has an upgraded crankhub without taking it apart?

apar · 02-25-2021, 03:35 PM

At what point did SSR learn that you had an upgraded crank hub already? I'm assuming they asked if you wanted to replace it still and you said yes? Did you prefer a different CH brand? Just curious cause this is interesting.

Rod_knee · 02-25-2021, 04:53 PM

Quote:

Originally Posted by Bluer2

what? they changed out your crank hub even though you already had an upgraded crank hub and now you are selling a used 4 pin crank hub? did i read that right? LOL

Quote:

Originally Posted by Bluer2

what? they changed out your crank hub even though you already had an upgraded crank hub and now you are selling a used 4 pin crank hub? did i read that right? LOL

I changed it because I rather had them do the work of a new one with warranty because I did not know the history of the car or what's been done to it. For a piece of mind. But yes it is the same CH

Rod_knee · 02-25-2021, 04:55 PM

Quote:

Originally Posted by aliiin

This kind of doesn't make any sense. Why on earth would any shop do that?

If a shop uncovers that the hub is already done, why would they re-do it?

You got took for a ride, or something is not adding up.

Quote:

Originally Posted by Bluer2

what? they changed out your crank hub even though you already had an upgraded crank hub and now you are selling a used 4 pin crank hub? did i read that right? LOL

Before taking it in to the shop I didn't know it was upgraded. They did informed me it has been upgraded but I went ahead and told them to change it for piece of mind and warranty.

mikey914 · 02-25-2021, 09:02 PM

by far the dumbest thing i have seen on the internet in 2021 so far.

joooiiiiii · 02-25-2021, 09:31 PM

Quote:

Originally Posted by mikey914

by far the dumbest thing i have seen on the internet in 2021 so far.

no u

Abukaram · 02-26-2021, 06:12 AM

And you list this just two hours after i ordered a brand new piece... fml

Rod_knee · 02-26-2021, 12:18 PM

Quote:

Originally Posted by Abukaram

And you list this just two hours after i ordered a brand new piece... fml

Return it! Lol

Rod_knee · 02-26-2021, 12:28 PM

Quote:

Originally Posted by mikey914

by far the dumbest thing i have seen on the internet in 2021 so far.

Okay Mikey, tell me this. You buy a car not knowing the history of the car because previous owner didn't document any work done to the car, you then buy it regardless because it was a good steal from the auction. $10k cheaper Market value. You then proceed to drive the car and notice a smoke coming out the vents. (Oil leak) then gets worse. Mind you, this is a car I bought for my wife which I care about. Took apart the car to spot where the leak is coming from, found the source. Then take it to a reputable shop, they quoted me for gasket change. Also told me I had an upgraded CH. Again I went ahead and told them to replace it because I wanted the shop warranty for that piece of mind. Took the CH hub and replaced it with a new one. Call me stupid but I went anyways. Just because I didn't know who worked on the car. Previous shop also lathered rtv on tops of oe gaskets. Goes to show how rookie that other shop was. Now with that being said. This car did come with the 4 pin CH one I'm selling BECAUSE I felt it is safer for my wife to drive knowingly I did a proper maintenance for the car. I keep all the docs on file for all the work that has been done. If you think this is stupid then I suggest you keep negative comments to yourself. Thanks

hC1001 · 02-26-2021, 01:18 PM

Quote:

Originally Posted by Rod_knee

Okay Mikey, tell me this. You buy a car not knowing the history of the car because previous owner didn't document any work done to the car, you then buy it regardless because it was a good steal from the auction. $10k cheaper Market value. You then proceed to drive the car and notice a smoke coming out the vents. (Oil leak) then gets worse. Mind you, this is a car I bought for my wife which I care about. Took apart the car to spot where the leak is coming from, found the source. Then take it to a reputable shop, they quoted me for gasket change. Also told me I had an upgraded CH. Again I went ahead and told them to replace it because I wanted the shop warranty for that piece of mind. Took the CH hub and replaced it with a new one. Call me stupid but I went anyways. Just because I didn't know who worked on the car. Previous shop also lathered rtv on tops of oe gaskets. Goes to show how rookie that other shop was. Now with that being said. This car did come with the 4 pin CH one I'm selling BECAUSE I felt it is safer for my wife to drive knowingly I did a proper maintenance for the car. I keep all the docs on file for all the work that has been done. If you think this is stupid then I suggest you keep negative comments to yourself. Thanks

Sounds reasonable to me. It sounds like a "while they were in there" situation.
You should get the installation fixture, fixture bolt and drill bit from SSR to supply the new buyer. Maybe they will give you a new crankhub bolt too or you can buy from BMW.

jpy1980 · 02-26-2021, 10:30 PM

Btw congrats on a new worry free car with the sSR warranty! Btw i remember your thread on the oil leak. What was the cause?

Rod_knee · 03-02-2021, 03:46 AM

Quote:

Originally Posted by jpy1980

Btw congrats on a new worry free car with the sSR warranty! Btw i remember your thread on the oil leak. What was the cause?

Thanks! Previous shop didn't put a lot of bolts and nuts back together, RTV the valve cover on the gaskets and even on the oil pan. Also the timing chain inspection cover wasn't fully sealed. Oil was leaking everywhere. I didn't even wanna know what timing was

shadowchemos · 03-05-2021, 07:29 PM

gonna PM you

GP0256 · 03-06-2021, 11:37 PM

Do you have the bit, special drill fixture tool and drill fixture bolt to go with it? I'm not sure I could install it without those parts

Rod_knee · 03-22-2021, 02:04 AM

Quote:

Originally Posted by GP0256

Do you have the bit, special drill fixture tool and drill fixture bolt to go with it? I'm not sure I could install it without those parts

I do not.

02-25-2021, 11:26 AM	#1
Rod_knee Enlisted Member 26 Rep 46 Posts Drives: 17 BMW M3 F80 Join Date: Jan 2021 Location: Norwalk iTrader: (0)	BIMMERPOST / Classifieds Asking Price: USD 680.00 Shipping Costs Included Item Interest I have a 4 pin crank hub for sale. Back story on why I'm selling this. I bought a used 17 f80 from auction not knowing the history of the vehicle. Had a major oil leak took it in to SSR performance in SoCal decided to upgrade the crank hub (again didn't know I had an upgraded CH) they gave me the CH and said it's still good. There's not crazy abrasion on it just looking to elevate the cost from what I had work done to my f80 so my wife doesn't kill me lol. Willing to ship as well. Attached Images __________________ 01' Nissan Skyline ER34 91' Toyota Cressida (drift car) 07' Toyota Tundra (work truck) 17' BMW M3 F80 (new addition) Instagram: @Rod_knee
	Appreciate 0 Tweet Quote

02-25-2021, 01:34 PM	#2
Bluer2 Captain 533 Rep 916 Posts Drives: F80 Join Date: Feb 2017 Location: Houston iTrader: (9)	what? they changed out your crank hub even though you already had an upgraded crank hub and now you are selling a used 4 pin crank hub? did i read that right? LOL
	Appreciate 0 Quote

02-25-2021, 01:52 PM	#3
aliiin I use my turn signal 707 Rep 278 Posts Drives: Toyota Tercel Join Date: Dec 2018 Location: DFW iTrader: (0)	This kind of doesn't make any sense. Why on earth would any shop do that? If a shop uncovers that the hub is already done, why would they re-do it? You got took for a ride, or something is not adding up.
	Appreciate 0 Quote

02-25-2021, 02:47 PM	#5
NickyC Lieutenant General 17424 Rep 10,637 Posts Drives: M4 CS. Former G82, x2 F82, F80 Join Date: Nov 2010 Location: Jacked out of my mind iTrader: (23)	Wat
	Appreciate 0 Quote

02-25-2021, 03:05 PM	#6
OtisF80M3 Private First Class 71 Rep 176 Posts Drives: F80 M3 Join Date: Jan 2018 Location: Kansas city iTrader: (0)	Well, can you even tell if it has an upgraded crankhub without taking it apart?
	Appreciate 0 Quote

02-25-2021, 03:35 PM	#7
apar Private First Class 88 Rep 137 Posts Drives: E92 M3 Join Date: May 2012 Location: San Diego iTrader: (1)	At what point did SSR learn that you had an upgraded crank hub already? I'm assuming they asked if you wanted to replace it still and you said yes? Did you prefer a different CH brand? Just curious cause this is interesting.
	Appreciate 0 Quote

02-25-2021, 09:02 PM	#10
mikey914 Private First Class 120 Rep 146 Posts Drives: 2017 F80 M3 Join Date: Jan 2021 Location: NYC iTrader: (0)	by far the dumbest thing i have seen on the internet in 2021 so far.
	Appreciate 6 alex_f3093.00 F80_Jay20.00 jimmydick88.50 sk3let0nz80.00 MWF80nick36.00 tomlong617.00 Quote

02-26-2021, 06:12 AM	#12
Abukaram Private 24 Rep 51 Posts Drives: F80 LCI Java Green, F85 Alpine Join Date: Feb 2017 Location: Abu Dhabi, United Arab Emirates iTrader: (1)	And you list this just two hours after i ordered a brand new piece... fml
	Appreciate 0 Quote

02-26-2021, 10:30 PM	#16
jpy1980 Lieutenant Colonel 1580 Rep 1,976 Posts Drives: 2015 BMW M3 -Smurfy Blue Vinyl Join Date: Sep 2018 Location: Los Angeles iTrader: (3)	Btw congrats on a new worry free car with the sSR warranty! Btw i remember your thread on the oil leak. What was the cause?
	Appreciate 0 Quote

03-05-2021, 07:29 PM	#18
shadowchemos Private 12 Rep 67 Posts Drives: 2015 M4 Join Date: May 2015 Location: Illinois iTrader: (0)	gonna PM you
	Appreciate 0 Quote

03-06-2021, 11:37 PM	#19
GP0256 Lieutenant 191 Rep 493 Posts Drives: 2006 MINI GP Join Date: Jun 2013 Location: Raleigh, NC iTrader: (0)	Do you have the bit, special drill fixture tool and drill fixture bolt to go with it? I'm not sure I could install it without those parts
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search