f80 KW V3 edc cancellation problem

[macbook123]

hello

i have f80 KW suspension V3 with cancellation kit from KW
yesterday got some trouble "chassis function restricted" and then saw that M1/M2 did not working

we have checked and problem was 'left rear' sensor

i dont know what to do, just to change only 1 (left rear) or have to instal new full(4) cancellation kit ?

thinking about to code out edc also

any recomendations?

[NickyC]

I’ve had this problem since I installed my V3s. The cancellation kit was worthless, I get “vertical acceleration sensor” errors now. Instead of spending hundreds on a fix which might not work, I’ll just be going with the code out route. I think that’s the best way to do it.

[18BMWX5M]

Just code out EDC it's much easier. Those delete kits are worthless.

[Thewum3]

Originally Posted by NickyC

I've had this problem since I installed my V3s. The cancellation kit was worthless, I get "vertical acceleration sensor" errors now. Instead of spending hundreds on a fix which might not work, I'll just be going with the code out route. I think that's the best way to do it.

I had the same error codes I know it's a dumb question but did you reinstall the sensors from the bottom of the shocks and then do a steering angle relearn. I fought with it for hours once I did those two it's been golden since.

[jpy1980]

Just code it out! Contact Kubax86 for remote coding!

[irunalot]

Kubax86 coded mine out as well. Zero errors and cheaper then a cancellation kit.

[CalaM4]

Originally Posted by NickyC

I’ve had this problem since I installed my V3s. The cancellation kit was worthless, I get “vertical acceleration sensor” errors now. Instead of spending hundreds on a fix which might not work, I’ll just be going with the code out route. I think that’s the best way to do it.

Hey, just wondering if you ever successfully codes this out?

Thanks!

[SYT_Shadow]

coding works perfectly

[NickyC]

Originally Posted by CalaM4

Hey, just wondering if you ever successfully codes this out?

Thanks!

Yep, coded it out in minutes.

[CalaM4]

Originally Posted by NickyC

Yep, coded it out in minutes.

Awesome! Will do that instead of trying to replace the sensor and it not working!

Did you code it yourself?

[NickyC]

Originally Posted by CalaM4

Awesome! Will do that instead of trying to replace the sensor and it not working!

Did you code it yourself?

No, I used a coder on here but unfortunately do not remember the name.

[CalaM4]

[QUOTE=NickyC;31036135]No, I used a coder on here but unfortunately do not remember the name.

All good. Thanks for the quick response!