Burger Tuning intake vs stock airbox Dyno results - Independent testing

[Mike@N54Tuning.com]

Originally Posted by ///M Leistung

I have BMS Intake with BMS Stage 1 tune (no other mods).

Day and night difference in sound! You dramatically hear the spooling of the turbos with every press of the throttle. It sounds like a turbo tuner car with a Blowoff or DV Valve. You can load it up and let off and get the "Pssssh" from the intake along with the fart noise from the Exhaust. You can scare people next to you with their windows down. Never gets old!

Glad you're enjoying it

Mike

[Graves]

Is a CEL normal for this mod? My car is completely stock with the BMS intake. CEL came on 4 days later.

[mike@x-ph.com]

Originally Posted by Graves

Is a CEL normal for this mod? My car is completely stock with the BMS intake. CEL came on 4 days later.

Double check install and make sure the sensor is not dirty or broken

[Graves]

What about these small gaps on the MAF sensors? The corners are coming up. Maybe there's air leaking?

[Fuel-It!]

There is an ORING sealing the MAF sensors so any gaps won't matter in terms of airflow measurements.

[Graves]

Originally Posted by Fuel-It!

There is an ORING sealing the MAF sensors so any gaps won't matter in terms of airflow measurements.

That's what I thought. I'm just gonna pull it apart and see what's up.

[mike@x-ph.com]

Originally Posted by Graves

That's what I thought. I'm just gonna pull it apart and see what's up.

[Graves]

Originally Posted by mike@x-ph.com

Took it all apart and resealed everything and no light yet. I think it was the vacuum line coming off the back of the front intake pipe to the right of the MAF sensor.