GetBMWParts
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   BMW M3 and BMW M4 Forum > BMW F80 M3 / F82 M4 Technical Topics > Engine / Drivetrain / Exhaust / Bolt-ons / Tuning

Post Reply
 
Thread Tools Search this Thread
      09-20-2019, 08:09 PM   #1
FriedPiston
Colonel
United_States
1968
Rep
2,711
Posts

Drives: Scraper
Join Date: Oct 2013
Location: East Oakland, CA

iTrader: (26)

Smile How To: FREE Full E85 Flash Tune w/ BMS + BM3

03/13/20 As of the most recent BM3 update, I've received word that only authorized BM3 tuners are allowed to upload raw .bin file formats. Thus, ending the option to self-upload JB4 BEF maps.

Sorry folks! This was a good open source option while it lasted, but business is business.





All credit goes to Terry@BMS for providing these free maps to the F8x M community.

Here's a quick tutorial on how to flash a FREE full E85 tune without the need for a custom e-tune. It's a well known fact that the BMS back-end flash maps can be flashed with MHD. However, many people are not aware that the same [.bin] flash files can also be flashed using bootmod3 -- see steps below:


1. Login to www.bootmod3.net
2. Navigate to [My Maps]
3. Click [+ File] option on the upper right corner
4. Click [Tap here to browse] and select your BMS E85 .bin flash file
5. Enter map description and click [Upload Map]
6. (Optional) Click [Config] for custom map configuration changes, such as:
* Burbles
* Cold-start delete
* No VMAX Speed Limiter
* No CEL from catless downpipes
7. Save Changes
8. Click [Flash] and select [Press Here to Flash Now]


F.A.Q.


What do I need to run full E85?

You can load the BMS E85 BEF similar to a Stage 0 or Stage 1 map. Because the boost values remain stock, the only requirement for the full E85 map is 100% E85 fuel content, with everything else optional.

Do I need to have a JB4 installed?
Both RACE and E85 back-end flash maps from BMS are self sufficient maps. Having a JB4 installed is optional, but mainly if you're looking to push more than stock boost values (18-21 psi).

What supporting mods are recommended?

* NGK 97506 spark plugs gapped between 0.018" to 0.020" (only if you experience misfires)
* BMS charge pipes or equivalent

Is this tune safe?
With the help of F8x volunteers, the BMS E85 BEF has been thoroughly tested and refined by Terry@BMS over the last two years. You can read more about its history at https://www.n54tech.com/forums/showthread.php?t=54795

Essentially, this is the same E85 BEF that was used to set the stock turbos 1/4 mile W.R. of 10.2 seconds at 135mph, along with many 10-second 1/4 mile passes achieved by other members.

What's the use of running this map if it stays at stock boost?
Aside from knowledge sharing, the purpose of this map is to allow those who are curious to know what it's like to run full E85 without spending $500 for a custom tune.

From personal experience, the E85 BEF on stock boost is levels above your traditional pump gas map in terms of performance. You can always run a stack tune setup (JB4 + BEF) if you feel the need for more horsepower.

Are there any known issues or limitations by running the BMS BEF maps?
Currently, both burbles and GTS startup roar options are not being applied correctly via BM3. There is an open support ticket for PTF to address this issue with a future update.

Where can I download the maps?
You can download the free maps at https://www.n54tech.com/forums/showthread.php?t=54795

Disclaimer: In the video walkthrough, you may have noticed that a newer version was uploaded over what's currently available via the download link. E85_IGN_14_T1 was a custom revision provided by Terry, which offers better startup under cold conditions and improved throttle response. Contact me via PM if you want to get your hands on this particular version.

Update 02/17/20: E85_IGN_14_T1 download link

Last edited by FriedPiston; 03-13-2020 at 02:48 PM..
Appreciate 6
Shadow2121.00
tanzm4_175.00
TideMD291.50
FSociety3810.00
FastM3CT165.50
      09-21-2019, 12:02 AM   #2
Shadow2
Second Lieutenant
Shadow2's Avatar
United_States
121
Rep
254
Posts

Drives: '16 MG F80 M3
Join Date: Dec 2018
Location: DMV

iTrader: (0)

Very timely, had just started looking into this, thanks!
Appreciate 0
      09-21-2019, 12:19 AM   #3
Fast4d
Captain
267
Rep
885
Posts

Drives: 325
Join Date: Jan 2012
Location: So cal

iTrader: (0)

didnt know I can import.


THANKS!!!!
__________________
SAFE-GUARD tire/wheel/windshield/paint protection is a FRAUD! do not waste your money!
Appreciate 0
      09-21-2019, 02:37 PM   #4
Fuel-It!
Banned
547
Rep
949
Posts

Drives: M4, M5, M2C, X4M, 440i, etc...
Join Date: Mar 2019
Location: Phoenix AZ

iTrader: (0)

Nice!
Appreciate 0
      09-22-2019, 04:39 PM   #5
MuffinFlavored
Second Lieutenant
79
Rep
260
Posts

Drives: 2014 F10 M5 MT
Join Date: Apr 2017
Location: N/A

iTrader: (0)

> What's the use of running this map if it stays at stock boost?
Aside from knowledge sharing, the purpose of this map is to allow those who are curious to know what it's like to run full E85 without spending $500 for a custom tune.

How much boost + timing do stage 1 / stage 2 maps add roughly?
Appreciate 0
      09-22-2019, 07:59 PM   #6
Fuel-It!
Banned
547
Rep
949
Posts

Drives: M4, M5, M2C, X4M, 440i, etc...
Join Date: Mar 2019
Location: Phoenix AZ

iTrader: (0)

The JB4 BEF maps allow a lot more performance than is possible JB4 only and gives you custom flash tune like performance with lots of extra features and safety systems provided by the JB4.
Appreciate 0
      09-23-2019, 10:25 AM   #7
FriedPiston
Colonel
United_States
1968
Rep
2,711
Posts

Drives: Scraper
Join Date: Oct 2013
Location: East Oakland, CA

iTrader: (26)

Quote:
Originally Posted by MuffinFlavored View Post
> What's the use of running this map if it stays at stock boost?
Aside from knowledge sharing, the purpose of this map is to allow those who are curious to know what it's like to run full E85 without spending $500 for a custom tune.

How much boost + timing do stage 1 / stage 2 maps add roughly?
OTS maps are usually on the conservative side. With the exception of one vendor pushing 26 psi, the rest are at 22-24 psi with various ignition timing.
Appreciate 0
      09-23-2019, 02:43 PM   #8
MuffinFlavored
Second Lieutenant
79
Rep
260
Posts

Drives: 2014 F10 M5 MT
Join Date: Apr 2017
Location: N/A

iTrader: (0)

Quote:
Originally Posted by nars3000 View Post
OTS maps are usually on the conservative side. With the exception of one vendor pushing 26 psi, the rest are at 22-24 psi with various ignition timing.
How much of an improvement over stock boost is that? aka what is stock boost for comparison?
Appreciate 0
      09-23-2019, 03:28 PM   #9
blockdoc
Lieutenant
United_States
373
Rep
500
Posts

Drives: 2015 M4
Join Date: Jul 2018
Location: Santa Barbara, CA

iTrader: (0)

Quote:
Originally Posted by MuffinFlavored View Post
How much of an improvement over stock boost is that? aka what is stock boost for comparison?
Stock boost is around 18 for base M4 IIRC. Around 20 for CS? Others please correct me if I am wrong
Appreciate 0
      11-07-2019, 01:30 PM   #10
TurboSid
Brigadier General
TurboSid's Avatar
1083
Rep
3,256
Posts

Drives: 2022 M4Cx BSM/FR
Join Date: Apr 2008
Location: Florida

iTrader: (4)

Garage List
2008 335i  [0.00]
I have a JB4 for S55 for sale if anyone wants. With the Bluetooth Connect kit
__________________


2022 BSM/FR M4 Competition X-Drive
2017 MW/SO M4 ZCP [SOLD] • 2015 MW/SO M4 M-DCT FBO [SOLD] • 2011 AW/CR 335is DCT FBO [SOLD] • 2008 AW/CR 335i 6MT FBO [SOLD]
Appreciate 0
      11-07-2019, 01:42 PM   #11
tdott
Brigadier General
3931
Rep
3,972
Posts

Drives: M3
Join Date: Nov 2010
Location: South FL / 6ix

iTrader: (4)

Cue some upset tuners.
Appreciate 0
      02-17-2020, 01:08 AM   #12
gdawgg
New Member
9
Rep
17
Posts

Drives: 2016 M3
Join Date: Feb 2020
Location: DFW

iTrader: (0)

Quote:
Originally Posted by FriedPiston View Post

Disclaimer: In the video walkthrough, you may have noticed that a newer version was uploaded over what's currently available via the download link. E85_IGN_14_T1 was a custom revision provided by Terry, which offers better startup under cold conditions and improved throttle response. Contact me via PM if you want to get your hands on this particular version.
Any updates on when v14 might be available?
Appreciate 0
      02-17-2020, 07:49 PM   #13
FriedPiston
Colonel
United_States
1968
Rep
2,711
Posts

Drives: Scraper
Join Date: Oct 2013
Location: East Oakland, CA

iTrader: (26)

Quote:
Originally Posted by gdawgg View Post
Any updates on when v14 might be available?
Added download link in the main post.
Appreciate 0
      02-17-2020, 10:22 PM   #14
gdawgg
New Member
9
Rep
17
Posts

Drives: 2016 M3
Join Date: Feb 2020
Location: DFW

iTrader: (0)

Quote:
Originally Posted by FriedPiston View Post
Added download link in the main post.
That’s great, thanks for providing. I’ll be sure to post results on my build once complete.
Appreciate 0
      02-18-2020, 10:28 AM   #15
mike@x-ph.com
BimmerPost Supporting Vendor
mike@x-ph.com's Avatar
United_States
23784
Rep
190,128
Posts


Drives: 07-335/12-328/18-M4/21-M4CP
Join Date: Sep 2013
Location: Las Vegas

iTrader: (23)

__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/

Phone number 702-494-9435
Appreciate 0
      02-18-2020, 12:42 PM   #16
theweebabySeamus
Captain
365
Rep
895
Posts

Drives: M3
Join Date: Jul 2014
Location: Bay Area

iTrader: (1)

Has anybody dyno'd this yet? I'm curious with the E85 will add. 30, 40 whp?
Appreciate 0
      02-18-2020, 02:33 PM   #17
FriedPiston
Colonel
United_States
1968
Rep
2,711
Posts

Drives: Scraper
Join Date: Oct 2013
Location: East Oakland, CA

iTrader: (26)

Quote:
Originally Posted by theweebabySeamus View Post
Has anybody dyno'd this yet? I'm curious with the E85 will add. 30, 40 whp?
Should be around ~480whp depending on whether the car is ZCP or non-ZCP. If you want more boost, either throw in a JB4, or fire up the unlocked map in TunerPro.
Appreciate 0
      02-18-2020, 03:53 PM   #18
gdawgg
New Member
9
Rep
17
Posts

Drives: 2016 M3
Join Date: Feb 2020
Location: DFW

iTrader: (0)

Quote:
Originally Posted by FriedPiston View Post
Should be around ~480whp depending on whether the car is ZCP or non-ZCP. If you want more boost, either throw in a JB4, or fire up the unlocked map in TunerPro.
So is the consensus on these Back End Flash maps that they should be fine to run as independent maps (of course with all necessary disclaimers), but the full benefit isn't realized unless used in conjunction with JB4 or further adjustment of the unlocked map by a qualified tuner? I guess what I'm asking is if I am okay uploading one of the BEF maps with BM3 or MHD even if I don't have JB4? Maybe that's the whole point of this thread...as indicated in the FAQs at the beginning. But just wanted to confirm before pulling the trigger.
Appreciate 0
      02-18-2020, 04:28 PM   #19
FriedPiston
Colonel
United_States
1968
Rep
2,711
Posts

Drives: Scraper
Join Date: Oct 2013
Location: East Oakland, CA

iTrader: (26)

Quote:
Originally Posted by gdawgg View Post
So is the consensus on these Back End Flash maps that they should be fine to run as independent maps (of course with all necessary disclaimers), but the full benefit isn't realized unless used in conjunction with JB4 or further adjustment of the unlocked map by a qualified tuner? I guess what I'm asking is if I am okay uploading one of the BEF maps with BM3 or MHD even if I don't have JB4? Maybe that's the whole point of this thread...as indicated in the FAQs at the beginning. But just wanted to confirm before pulling the trigger.
What do I need to run full E85?
You can load the BMS E85 BEF similar to a Stage 0 or Stage 1 map. Because the boost values remain stock, the only requirement for the full E85 map is 100% E85 fuel content, with everything else optional.
Appreciate 0
      02-18-2020, 04:41 PM   #20
theweebabySeamus
Captain
365
Rep
895
Posts

Drives: M3
Join Date: Jul 2014
Location: Bay Area

iTrader: (1)

Quote:
Originally Posted by FriedPiston View Post
Should be around ~480whp depending on whether the car is ZCP or non-ZCP. If you want more boost, either throw in a JB4, or fire up the unlocked map in TunerPro.
Solid numbers for stock boost.
Appreciate 0
      02-18-2020, 05:39 PM   #21
FriedPiston
Colonel
United_States
1968
Rep
2,711
Posts

Drives: Scraper
Join Date: Oct 2013
Location: East Oakland, CA

iTrader: (26)

Quote:
Originally Posted by theweebabySeamus View Post
Solid numbers for stock boost.
Indeed, and that's just me throwing a random number based on how it felt. The car felt very strong in the low end range, so it could potentially put down 490whp or higher... it's all a guessing game until someone spends the time to strap their car on the dyno using this base map.
Appreciate 0
      02-19-2020, 06:18 AM   #22
Smee
Colonel
Smee's Avatar
505
Rep
2,152
Posts

Drives: BMW M4 F83
Join Date: Aug 2016
Location: Norfolk

iTrader: (0)

anyone got the stage 2 tunes ?
__________________
Current: BMW M4 F83 - Mods : Pedal Covers, LCI Stereo facia Retrofit and Carbon Rear corner covers

Old: F32 435d M Sport - Mods : HR Sport Springs, 20" Veemann V-FS23 in Gun Metal, M Performance Body Kit, Pedal Covers, Eurspec CF Mirror Caps, More-BHP remap 364 BHP 741 NM, M4 Under Chassis Brace, 15mm Rear ARB, 8.8" Screen Retrofit and LCI Stereo facia Retrofit
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:39 AM.




f80post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST