Wheels & tyres for sale

[RevNev]

Set of 4 custom Koya SF11's 19x9.5 ET22 and 19x11 ET43 with Michelin Cup 2 tyres, fits F8x M3/M4 and clears carbon ceramic brakes. Front: 265/35 and rear 315/30. Fits F8x M3/M4 and clears carbon ceramic brakes. Virtually brand new with BMW centre caps travelled 150km's no track work or skids.

Great setup for the track or if you like the look of a serious bit of rubber filling the rear guards scrape free, this is the ideal fitment

Wheels and tyres new cost $4750, feel free to PM me with an offer.

Can Send Australia wide.

[mihail.b]

Any prices?

[RevNev]

Originally Posted by mihail.b

Any prices?

Wheels and tyres new cost $4750, feel free to PM me with an offer.

The wheels and tyres are a great track setup and a serious bit of rubber on back (315) totally scrape free looks pretty good too: A dedicated set of track wheels and tyres is the only way to go instead of skating around on street tyres and messing up your road wheels

[bruce4030]

hi Rev
how old are the cup 2 285`s?

[rokkuchan]

Wanna swap cup 2s with my ps4s in 295/30/20?

Also done about 250kms since I got them. They just scrape a little with my wheels. I'm also in Adelaide

[RevNev]

Originally Posted by bruce4030

hi Rev
how old are the cup 2 285`s?

Dealer took them off a brand new M4CS late '18. Buyer wanted PS4S's on their new car and I bought the Cup 2's with 6km's on them for my CS (763M) wheels.

[RevNev]

Originally Posted by rokkuchan

Wanna swap cup 2s with my ps4s in 295/30/20?

Also done about 250kms since I got them. They just scrape a little with my wheels. I'm also in Adelaide

No, I recently bought a set of Bridgestone S007A's for my street wheels. I couldn't get any 285/30 PS4S's (on back order) at the time. Not as grippy as Cup 2's of course, but the car feels pretty good on Bridgestone's for a street tyre.

295's are a bit tall I think and going for width in the rear, 19's have a better selection of tyre sizes.

[RevNev]

Bump, anyone want these wheels and tyres so I can free up some room in my shed?

[RevNev]

Bump

[Robbo]

Hi were are you located RevNev
I live in regional Victoria. And what is your asking price.

[RevNev]

Originally Posted by Robbo

Hi were are you located RevNev
I live in regional Victoria. And what is your asking price.

PM sent

[RevNev]

Bump, anyone for a great wheel/tyre setup for the track?

[RevNev]

Bump

[RevNev]

Sold

[mynameisplayer]

Holy shit. You have a ~$150k car and you put Chinese wheels on it?!

khttps://www.industry.gov.au/sites/default/files/adc/public-record/007_-_submission_-_importer_-_koya_corporation_pty_ltd.pdf

https://www.boatsales.com.au/editori...stralia-17307/

[koastal]

Originally Posted by mynameisplayer

Holy shit. You have a ~$150k car and you put Chinese wheels on it?!

khttps://www.industry.gov.au/sites/default/files/adc/public-record/007_-_submission_-_importer_-_koya_corporation_pty_ltd.pdf

https://www.boatsales.com.au/editori...stralia-17307/

Nothing wrong with Koya - they do custom offsets at reasonable money. Good value track wheels imo. Im not sure what closing thier aus boat business has to do with anything

[RevNev]

Originally Posted by mynameisplayer

Holy shit. You have a ~$150k car and you put Chinese wheels on it?!

khttps://www.industry.gov.au/sites/default/files/adc/public-record/007_-_submission_-_importer_-_koya_corporation_pty_ltd.pdf

https://www.boatsales.com.au/editori...stralia-17307/

Be pretty dumb playing with a set of 14k HRE's to test tyre combos and offsets don't you think? But don't stress, here's the wheels that replaced the Koya's, a set of forged Signature wheels, a bit wider and a bit different offsets than the Koya "test" wheels.

For the record, Koya passed CAMS approval for a race wheel and are a controlled wheel supplier for a circuit category. Nothing wrong with them for a cast wheel.

[uh_mwm3]

Hi, are these still available?

[AdmiralBulldog]

Pm'ed