SUPREME POWER | BBS Wheel Gallery For F8X M3/M4

supremepower · 03-26-2019, 10:53 AM

Quote:

Originally Posted by ethannie9696

Great! Looking forward to hear back!

They are actually the Emmanuelle Design springs

ethannie9696 · 03-26-2019, 04:09 PM

Quote:

Originally Posted by supremepower

They are actually the Emmanuelle Design springs

So it's around 1'3'' F and .8'' R drop?

matt@supremepower · 03-30-2019, 12:30 AM

Quote:

Originally Posted by ethannie9696

So it's around 1'3'' F and .8'' R drop?

Yessir!

ptper · 08-07-2019, 10:23 AM

What is your opinion on spacers for the BBS FI-R's? I feel like they can be a little more flush, but I don't want it to rub or have any other negative effects to driving behavior. Do you have any pics with that setup?

Yes, I'm a pic whore...

itsmeeeugene · 08-15-2019, 03:44 PM

Thanks to supremepower kim@supremepower for helping me get these

Eric gave me these shots to hold me over until then

Will post more when i get them on the M4

THEROK · 08-18-2019, 05:50 PM

Is BBS still not making the BBS LM in F8X specific sizes? Ideally, 20x9.5 ET20-22, 20x11 ET38-40?

EVO_S4 · 09-04-2019, 10:37 AM

Finally installed

MR_X · 11-28-2019, 07:25 AM

BBS LM-R rolling on MPSS4 lowered on Swift springs.
20x9.5 with 265/30-20
20x11 with 295/30-20

I'm either going to get 275s up front or 3mm spacers eventually.

EVO_S4 · 03-15-2020, 07:37 PM

19 E88 on EDM springs

supremepower · 03-16-2020, 11:40 PM

BBS LM 20" on M4 CS w Bilstein Damptronic Suspension

LOW4LYF · 03-18-2020, 08:53 PM

Is this the lowest setting in the front on the CS? Trying to figure if the Damptronic can go lower as the KW HAS?

Thanks

supremepower · 03-19-2020, 03:44 PM

Quote:

Originally Posted by LOW4LYF

Is this the lowest setting in the front on the CS? Trying to figure if the Damptronic can go lower as the KW HAS?

Thanks

Yes thats the lowest setting in the front on the Damptronics and ride quality & performance is amazing.

THEROK · 03-20-2020, 12:50 PM

Supreme team, can please consider using some of your BBS relationship juice to have them release a set of 20" LMs in satin black and silver with the following specs?

9.5" fronts ET22
11" rears ET 40

Gracias.

supremepower · 03-20-2020, 01:30 PM

Quote:

Originally Posted by THEROK

Supreme team, can please consider using some of your BBS relationship juice to have them release a set of 20" LMs in satin black and silver with the following specs?

9.5" fronts ET22
11" rears ET 40

Gracias.

Hey THEROK! How are you man? We JUST had this request from another customer and he couldnt wait so we built these in our 3piece custom using LM centers:

THEROK · 03-20-2020, 04:02 PM

Quote:

Originally Posted by supremepower

Hey THEROK! How are you man? We JUST had this request from another customer and he couldnt wait so we built these in our 3piece custom using LM centers:

What up, team? I'm sure you have another happy customer!

I'm a BBS purist at heart so want it all BBS in-house. Designed by them. Sourced by them. Run-out and testing certified by them. Warrantied by them.

The rim lip and the bolts look different here and doesn't jive with me. I prefer the flatter stepped lip profile so unique to the LM and LM-Rs. These are everything to me as a BBS fan.

If you can help, it'd be much appreciated. If not, all good as well. Stay safe out there.

supremepower · 03-20-2020, 06:01 PM

Nobody and I mean nobody is as much as a purist as we are. Goes against all the grain to make the LM or LM-R in 3piece but if someone has to have it we will do it.

We lobbied for the 19 x 9.5 and 11 LM and it took some time and pushing but it eventually materialized.

We have requested in the past the LM to be made like the LM-R which is available in 20 x 9.5 and 11 and nothing was done.

We are requesting again for the LM in 20 x 9.5 and 11 and will report back findings.

We are working on bringing the RT-88 back as a standard production wheel but do feel the 20 x 9.5 and 11 LM would be a good choice too. We have been running 20 x 9 and 10 and its been working but a little more would be nice

Here is the 19 x 9.5 and 11 to enjoy for now....please stay safe n healthy! Keep you posted. Appreciate ya!

LOW4LYF · 03-20-2020, 06:14 PM

Quote:

Originally Posted by supremepower

Hey THEROK! How are you man? We JUST had this request from another customer and he couldnt wait so we built these in our 3piece custom using LM centers:

Beautiful wheels!

AlejoEvo · 03-20-2020, 06:46 PM

Quote:

Originally Posted by supremepower

Quote:

Originally Posted by THEROK

Supreme team, can please consider using some of your BBS relationship juice to have them release a set of 20" LMs in satin black and silver with the following specs?

9.5" fronts ET22
11" rears ET 40

Gracias.

Hey THEROK! How are you man? We JUST had this request from another customer and he couldnt wait so we built these in our 3piece custom using LM centers:

I love how that wheels look! If I change my wheels I'm going with that full black version!!

supremepower · 03-20-2020, 07:37 PM

Quote:

Originally Posted by THEROK

Supreme team, can please consider using some of your BBS relationship juice to have them release a set of 20" LMs in satin black and silver with the following specs?

9.5" fronts ET22
11" rears ET 40

Gracias.

Received a response just now to the message sent in earlier today:

"Hey Eric. It is possible, but not anytime soon. BBS Japan stated thatthere is no room for aftermarket development for at least a year..."

THEROK · 03-20-2020, 08:01 PM

Quote:

Originally Posted by supremepower

Quote:

Originally Posted by THEROK

Supreme team, can please consider using some of your BBS relationship juice to have them release a set of 20" LMs in satin black and silver with the following specs?

9.5" fronts ET22
11" rears ET 40

Gracias.

Received a response just now to the message sent in earlier today:

"Hey Eric. It is possible, but not anytime soon. BBS Japan stated thatthere is no room for aftermarket development for at least a year..."

Many thanks, Eric. Appreciate the insider access & follow-up. 🤜🏼🤛🏼

Soymichael · 06-05-2020, 05:28 PM

Quote:

Originally Posted by supremepower

Nobody and I mean nobody is as much as a purist as we are. Goes against all the grain to make the LM or LM-R in 3piece but if someone has to have it we will do it.

We lobbied for the 19 x 9.5 and 11 LM and it took some time and pushing but it eventually materialized.

We have requested in the past the LM to be made like the LM-R which is available in 20 x 9.5 and 11 and nothing was done.

We are requesting again for the LM in 20 x 9.5 and 11 and will report back findings.

We are working on bringing the RT-88 back as a standard production wheel but do feel the 20 x 9.5 and 11 LM would be a good choice too. We have been running 20 x 9 and 10 and its been working but a little more would be nice

Here is the 19 x 9.5 and 11 to enjoy for now....please stay safe n healthy! Keep you posted. Appreciate ya!

What are the offset on the wheels and is 19 X 9.5 in the rear as well?

trungnguyen28 · 08-10-2021, 09:45 PM

Just put these on today. Picked them up locally but pretty sure they belonged to a forum member on here who got them from Slicer.

19x10.5 +19 265/35
19x11.5 +43 305/30

08-07-2019, 10:23 AM	#136
ptper Major 589 Rep 1,094 Posts Drives: '18 Avus Blue F80 Join Date: Sep 2016 Location: MD iTrader: (1)	What is your opinion on spacers for the BBS FI-R's? I feel like they can be a little more flush, but I don't want it to rub or have any other negative effects to driving behavior. Do you have any pics with that setup? Yes, I'm a pic whore... Attached Images
	Appreciate 0

08-15-2019, 03:44 PM	#137
itsmeeeugene Private First Class 160 Rep 170 Posts Drives: 2018 MW M4 ZCP Join Date: Sep 2008 Location: SoCal iTrader: (0)	Thanks to supremepower kim@supremepower for helping me get these Eric gave me these shots to hold me over until then Will post more when i get them on the M4 Attached Images
	Appreciate 0

08-18-2019, 05:50 PM	#138
THEROK Major 1268 Rep 1,287 Posts Drives: Genesis GV80 Join Date: Dec 2010 Location: Gangnam District iTrader: (0)	Is BBS still not making the BBS LM in F8X specific sizes? Ideally, 20x9.5 ET20-22, 20x11 ET38-40? __________________ Dry sump flat six
	Appreciate 0

09-04-2019, 10:37 AM	#139
EVO_S4 Colonel 117 Rep 2,232 Posts Drives: 2016 M3 Join Date: Apr 2005 Location: TN iTrader: (28) Garage List 2016 BMW M3 [0.00] 2009 BMW [8.24]	Finally installed Attached Images __________________ 2016 M3 2016 Audi Q5 3.0T
	Appreciate 0

11-28-2019, 07:25 AM	#140
MR_X Old guy 306 Rep 266 Posts Drives: tricycle Join Date: Dec 2009 Location: Austin, Tx iTrader: (0)	BBS LM-R rolling on MPSS4 lowered on Swift springs. 20x9.5 with 265/30-20 20x11 with 295/30-20 I'm either going to get 275s up front or 3mm spacers eventually. Attached Images
	Appreciate 2 THEROK1267.50 f82hopeful9.00

03-15-2020, 07:37 PM	#141
EVO_S4 Colonel 117 Rep 2,232 Posts Drives: 2016 M3 Join Date: Apr 2005 Location: TN iTrader: (28) Garage List 2016 BMW M3 [0.00] 2009 BMW [8.24]	19 E88 on EDM springs Attached Images __________________ 2016 M3 2016 Audi Q5 3.0T
	Appreciate 1 clutchdj1877.00

03-16-2020, 11:40 PM	#142
supremepower Supreme Leader 2283 Rep 6,548 Posts Drives: G80, 996GT2, 996TT, 991RS 356b Join Date: Jun 2006 Location: Fullerton, CA So.Cal. iTrader: (15)	BBS LM 20" on M4 CS w Bilstein Damptronic Suspension
	Appreciate 3 zamboni1127.50 Bulleh0.00 Andi-M2192.50

03-18-2020, 08:53 PM	#143
LOW4LYF Brigadier General 2163 Rep 4,106 Posts Drives: E92 M3 & F85 X5M Join Date: Jul 2016 Location: @Home iTrader: (1)	Is this the lowest setting in the front on the CS? Trying to figure if the Damptronic can go lower as the KW HAS? Thanks
	Appreciate 0

03-20-2020, 12:50 PM	#145
THEROK Major 1268 Rep 1,287 Posts Drives: Genesis GV80 Join Date: Dec 2010 Location: Gangnam District iTrader: (0)	Supreme team, can please consider using some of your BBS relationship juice to have them release a set of 20" LMs in satin black and silver with the following specs? 9.5" fronts ET22 11" rears ET 40 Gracias. __________________ Dry sump flat six
	Appreciate 1 JustAnothaM4883.50

03-20-2020, 06:01 PM	#148
supremepower Supreme Leader 2283 Rep 6,548 Posts Drives: G80, 996GT2, 996TT, 991RS 356b Join Date: Jun 2006 Location: Fullerton, CA So.Cal. iTrader: (15)	Nobody and I mean nobody is as much as a purist as we are. Goes against all the grain to make the LM or LM-R in 3piece but if someone has to have it we will do it. We lobbied for the 19 x 9.5 and 11 LM and it took some time and pushing but it eventually materialized. We have requested in the past the LM to be made like the LM-R which is available in 20 x 9.5 and 11 and nothing was done. We are requesting again for the LM in 20 x 9.5 and 11 and will report back findings. We are working on bringing the RT-88 back as a standard production wheel but do feel the 20 x 9.5 and 11 LM would be a good choice too. We have been running 20 x 9 and 10 and its been working but a little more would be nice Here is the 19 x 9.5 and 11 to enjoy for now....please stay safe n healthy! Keep you posted. Appreciate ya! Last edited by supremepower; 03-20-2020 at 06:07 PM..
	Appreciate 0

08-10-2021, 09:45 PM	#154
trungnguyen28 Second Lieutenant 51 Rep 220 Posts Drives: 2015 BMW M3 Join Date: Nov 2018 Location: California iTrader: (7)	Just put these on today. Picked them up locally but pretty sure they belonged to a forum member on here who got them from Slicer. 19x10.5 +19 265/35 19x11.5 +43 305/30
	Appreciate 0