AC Schnizter wheel fitment

[mowgli_sms]

Hi.

Will be picking up my M4 by the end of June.

I plan to sell the OE 666 wheels which come with it.

Wheels i plan to replace it with are a set of AC Schnizter Type 3 Non racing in 19s.

Issue is the offsets of the wheels.

They are:

fronts - 8.5j et15

Rears - 9.5j et 21.5.

Planned to put them on my e46 M3. But was thinking of trying it on the M4.
Spec were off the E39 5 series and the E38.

Would i have issue on fitment, as i plan to fit eibach springs on the car and also what tire sizes would you recommend.

Regards

sive

[RevNev]

Originally Posted by mowgli_sms

Hi.

Will be picking up my M4 by the end of June.

I plan to sell the OE 666 wheels which come with it.

Wheels i plan to replace it with are a set of AC Schnizter Type 3 Non racing in 19s.

Issue is the offsets of the wheels.

They are:

fronts - 8.5j et15

Rears - 9.5j et 21.5.

Planned to put them on my e46 M3. But was thinking of trying it on the M4.
Spec were off the E39 5 series and the E38.

Would i have issue on fitment, as i plan to fit eibach springs on the car and also what tire sizes would you recommend.

Regards

sive

With a 275 tyre, an ET 21.5 is the same as a stock 19 with an 18mm spacer. Pretty aggressive offset on the rear to avoid scraping.

[mowgli_sms]

Originally Posted by RevNev

With a 275 tyre, an ET 21.5 is the same as a stock 19 with an 18mm spacer. Pretty aggressive offset on the rear to avoid scraping.

Thanks for the reply.

Tires for the would be 245 right.

Thanks for the advice.