MST Intake For BMW M2 Competition, M3 & M4 *** NEW PRODUCT ***

mike@x-ph.com · 01-25-2020, 10:38 AM

We have completed the development of the BMW M2 M3 M4 intake system that is dedicated to the S55 3.0T engine. This intake kit includes a 3" intake pipe, an engine heat shield that helps block hot engine air, a MST high-flow air filter and easy to install.

We also did the Dyno testing, the maximum increase is about 10-13HP, the throttle response is better than the original air intake,and there are more exciting sounds. After installation, it can be upgraded to the original power programming or Stage 1-3 programming.

Features

* Maximizes airflow to provide gains of 10-12 HP!
* High quality laser cut heat shield helps block hot engine air
* Better throttle response and more exciting sounds
* Can be upgraded to the original power programming or Stage 1-3 programming
* High-flow air filter, easy to maintain

Fits

BMW S55 3.0 Engine M2/M3/M4

jpy1980 · 01-25-2020, 12:30 PM

Hey Mike,

How’s fitment on this intake? Is it Better than the VRSF? I didn’t like the fact that I had to use an angled coupler along with the revised passenger pipe for the VRSF system.

calubi · 01-25-2020, 01:48 PM

Where is the driver side MAF located? The first picture shows it in the middle of the pipe, while the second shows it close to the filter.

deemack79 · 01-25-2020, 05:20 PM

Installed these on xmas. Installation was straightforward, and no issues with fitment. Name: IMG_6503.jpg
Views: 2742
Size: 466.9 KB

jpy1980 · 01-25-2020, 10:17 PM

Quote:

Originally Posted by calubi

Where is the driver side MAF located? The first picture shows it in the middle of the pipe, while the second shows it close to the filter.

You’re right. But looking at the last post it seems like it’s closer to the filter.

mike@x-ph.com · 01-27-2020, 10:38 AM

Quote:

Originally Posted by deemack79

Installed these on xmas. Installation was straightforward, and no issues with fitment.Attachment 2226577

Looks great

TR930 · 01-27-2020, 12:11 PM

Quote:

Originally Posted by mike@x-ph.com

Looks great

How much? NVMd, went to the web site.

TR930 · 01-27-2020, 12:18 PM

Quote:

Originally Posted by deemack79

Installed these on xmas. Installation was straightforward, and no issues with fitment.Attachment 2226577

Any thoughts on feedback on these? I doubt there is any power, but sound? throttle response??

mike@x-ph.com · 01-28-2020, 10:22 AM

Quote:

Originally Posted by TR930

How much? NVMd, went to the web site.

deemack79 · 01-29-2020, 05:31 PM

Quote:

Originally Posted by TR930

Quote:

Originally Posted by deemack79

Installed these on xmas. Installation was straightforward, and no issues with fitment.Attachment 2226577

Any thoughts on feedback on these? I doubt there is any power, but sound? throttle response??

Not sure of power, supposed to be 10hp or so. But the sound is proper! You get a nice spool up sound along with a pretty decent blow off sound. Throttle response does seem a tad bit more crisp than with the stock air boxes. My car is all stock except for the intakes, and the exhaust sounds meaner than before. A bit more aggressive, a bit louder, with none of the pops and bangs associated with after market exhausts. I will not being doing an exhaust, this sound is more than enough.

mike@x-ph.com · 01-29-2020, 06:57 PM

Quote:

Originally Posted by deemack79

Not sure of power, supposed to be 10hp or so. But the sound is proper! You get a nice spool up sound along with a pretty decent blow off sound. Throttle response does seem a tad bit more crisp than with the stock air boxes. My car is all stock except for the intakes, and the exhaust sounds meaner than before. A bit more aggressive, a bit louder, with none of the pops and bangs associated with after market exhausts. I will not being doing an exhaust, this sound is more than enough.

DanMpower · 01-29-2020, 09:57 PM

Now this looks like a very nice intake, definitely looks well designed and decently priced. No unnecessary bling, just function over form. I like it!

deemack79 · 01-30-2020, 01:58 AM

Quote:

Originally Posted by RSXiMUS

Now this looks like a very nice intake, definitely looks well designed and decently priced. No unnecessary bling, just function over form. I like it!

It does come with a big MST badge on the pipe, but it's easily removed for a much cleaner look.

mike@x-ph.com · 01-30-2020, 10:07 AM

Quote:

Originally Posted by RSXiMUS

Now this looks like a very nice intake, definitely looks well designed and decently priced. No unnecessary bling, just function over form. I like it!

mike@x-ph.com · 02-03-2020, 11:36 AM

mike@x-ph.com · 02-24-2020, 01:10 PM

Thank you Justin for the picture

thomaslchen · 02-24-2020, 01:21 PM

any vids showing the sound?

mike@x-ph.com · 02-25-2020, 11:06 AM

Quote:

Originally Posted by thomaslchen

any vids showing the sound?

I will post videos as soon as I have one available

Mike. · 01-10-2021, 12:08 PM

Here is a video showing the sound. Sorry for the wind noise ⁣

mike@x-ph.com · 01-11-2021, 11:38 AM

Quote:

Originally Posted by Mike.

Here is a video showing the sound. Sorry for the wind noise ⁣

Thank you for sharing

mike@x-ph.com · 05-22-2023, 08:20 PM

Update: MST has changed the filters they use with this intake. Also posted a new Dyno

Dyno

01-25-2020, 10:38 AM	#1
mike@x-ph.com BimmerPost Supporting Vendor 24178 Rep 190,767 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	MST Intake For BMW M2 Competition, M3 & M4 * NEW PRODUCT * We have completed the development of the BMW M2 M3 M4 intake system that is dedicated to the S55 3.0T engine. This intake kit includes a 3" intake pipe, an engine heat shield that helps block hot engine air, a MST high-flow air filter and easy to install. We also did the Dyno testing, the maximum increase is about 10-13HP, the throttle response is better than the original air intake,and there are more exciting sounds. After installation, it can be upgraded to the original power programming or Stage 1-3 programming. Features * Maximizes airflow to provide gains of 10-12 HP! * High quality laser cut heat shield helps block hot engine air * Better throttle response and more exciting sounds * Can be upgraded to the original power programming or Stage 1-3 programming * High-flow air filter, easy to maintain Fits BMW S55 3.0 Engine M2/M3/M4 __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Tweet Quote

01-25-2020, 12:30 PM	#2
jpy1980 Lieutenant Colonel 1582 Rep 1,976 Posts Drives: 2015 BMW M3 -Smurfy Blue Vinyl Join Date: Sep 2018 Location: Los Angeles iTrader: (3)	Hey Mike, How’s fitment on this intake? Is it Better than the VRSF? I didn’t like the fact that I had to use an angled coupler along with the revised passenger pipe for the VRSF system.
	Appreciate 0 Quote

01-25-2020, 01:48 PM	#3
calubi Private First Class 26 Rep 125 Posts Drives: F80 M3 Comp Join Date: Aug 2019 Location: Ohio iTrader: (0)	Where is the driver side MAF located? The first picture shows it in the middle of the pipe, while the second shows it close to the filter.
	Appreciate 1 ntg442888.50 Quote

01-25-2020, 05:20 PM	#4
deemack79 Second Lieutenant 286 Rep 255 Posts Drives: F80 M3 Join Date: Jan 2020 Location: Long Island iTrader: (1)	Installed these on xmas. Installation was straightforward, and no issues with fitment.
	Appreciate 1 Detoxified204.50 Quote

01-29-2020, 09:57 PM	#12
DanMpower Colonel 3234 Rep 2,160 Posts Drives: BMW M3s and a Red VW Join Date: Feb 2018 Location: Southern CA iTrader: (28)	Now this looks like a very nice intake, definitely looks well designed and decently priced. No unnecessary bling, just function over form. I like it!
	Appreciate 0 Quote

02-03-2020, 11:36 AM	#15
mike@x-ph.com BimmerPost Supporting Vendor 24178 Rep 190,767 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	__________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

02-24-2020, 01:10 PM	#16
mike@x-ph.com BimmerPost Supporting Vendor 24178 Rep 190,767 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Thank you Justin for the picture __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 1 so_f80m395.50 Quote

02-24-2020, 01:21 PM	#17
thomaslchen New Member 10 Rep 13 Posts Drives: M3 Join Date: Jan 2016 Location: Houston, TX iTrader: (0)	any vids showing the sound?
	Appreciate 0 Quote

01-10-2021, 12:08 PM	#19
Mike. Mike: Everyone's Pal 2042 Rep 2,972 Posts Drives: F80 M3 Join Date: May 2013 Location: Eastern Long Island iTrader: (5) Garage List 2013 BMW 335xi [10.00]	Here is a video showing the sound. Sorry for the wind noise ⁣ __________________ Alpine MSS Stage 2+ E30 tune\|MST Intakes\|VRSF Single Mid Pipe\|Agency Power Intercooler\|VTT Full solution crank hub fix
	Appreciate 0 Quote

05-22-2023, 08:20 PM	#21
mike@x-ph.com BimmerPost Supporting Vendor 24178 Rep 190,767 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Update: MST has changed the filters they use with this intake. Also posted a new Dyno Dyno __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote