09-20-2021, 03:37 PM | #2 |
Private
8
Rep 64
Posts
Drives: E39 M5, F80 M3 6MT
Join Date: Jun 2018
Location: SoCal, 91748
|
08 - its for - Front & rear cigarette lighter, 12V socket / Glove box charging socket (12V) according to link below. might be OK?
https://www.servicetutorials.com/en/...ols-explained/
__________________
JRZ PRO 3way, BMC, VTT V2 CH, WAGNER TMIC, ESS CP, IP Ign Coils, BMS catch can, ID fuel filter, Xclutch twin disc, Brembo BBK, Whiteline roll bars, Vorshlag CPs, SPL arms, Turner diff plate & oil cooler guard, Akrapovic exhaust, RZ39 BC Forged w/ P4S 275/325-19, 3D style carbon kits, Suv GTS hood, Sparco QRT-Carbon, CAE SSK, MSL65-80 Turbo, BMP LPFP & PI. Bend Motive E85.
|
Appreciate
1
TractionControlDelete4588.50 |
09-21-2021, 10:02 PM | #3 | |
Private
88
Rep 94
Posts |
Quote:
I'm sure there are peeps with the f87 fuse box who already tapped it. Where y'all at! |
|
Appreciate
0
|
09-22-2021, 02:12 AM | #4 |
Major General
5459
Rep 5,152
Posts |
This vid has some info that might help. Check at the minute and a half mark. He goes into detail of power hookup(s). F30 is very similar to ours.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
1
methkingM2C87.50 |
09-22-2021, 01:07 PM | #5 |
Private
8
Rep 64
Posts
Drives: E39 M5, F80 M3 6MT
Join Date: Jun 2018
Location: SoCal, 91748
|
I would run power wire from battery for the pump. lighter fuse for the ignition signal.
__________________
JRZ PRO 3way, BMC, VTT V2 CH, WAGNER TMIC, ESS CP, IP Ign Coils, BMS catch can, ID fuel filter, Xclutch twin disc, Brembo BBK, Whiteline roll bars, Vorshlag CPs, SPL arms, Turner diff plate & oil cooler guard, Akrapovic exhaust, RZ39 BC Forged w/ P4S 275/325-19, 3D style carbon kits, Suv GTS hood, Sparco QRT-Carbon, CAE SSK, MSL65-80 Turbo, BMP LPFP & PI. Bend Motive E85.
|
Appreciate
0
|
09-22-2021, 04:19 PM | #6 | |
Private
88
Rep 94
Posts |
Quote:
|
|
Appreciate
0
|
09-22-2021, 04:39 PM | #7 |
Captain
759
Rep 950
Posts |
Are you installing a solenoid with your kit? Those check valves suck and do tend to leak with time.
__________________
M4CS Frozen Blue
ARM DP's/Resonated Mid-pipe | SPL links | Hotchkis bars | JRZ RS2/camber plates | K&N | Koyorad HX | Powerflex purple | Rouge | Spiegler | Speed Eng. snorkel | Vargas CBC/hub | Wagner IC | xHP | Xpel stealth ppf |
Appreciate
0
|
09-22-2021, 05:34 PM | #8 |
Private
88
Rep 94
Posts |
Yeah solenoid required with trunk install. Never had a leak issue in my 3 years with the previous check valve + solenoid setup. Forget which fuse I used for wiring
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|