10-12-2021, 02:31 PM | #1 |
Major General
964
Rep 5,033
Posts |
KW EDC Delete kit(will work with other brands)
I separated this kit when I sold my Clubsports, so they are up for sale here. The standard price for a used EDC delete kit on here is about $250, and many times that is only for the (4) modules, but this kit will be complete. *You will receive everything in the bottom corner of the pic: (4) modules (2) gaskets (2) rear damper caps (6) bolts(only 5 showing, but I have the other) |
10-17-2021, 04:31 PM | #3 |
Captain
1130
Rep 828
Posts |
Missing the 4 x electrical connectors. Those yellow delete kits will not plug into the car side EDC harness. KW includes 4 connectors (green vs blue OEM) to make all this work.
Without them this is pretty much useless. See them here: https://f80.bimmerpost.com/forums/sh....php?t=1645414 |
Appreciate
0
|
10-18-2021, 02:01 PM | #4 | |
Major General
964
Rep 5,033
Posts |
This would be true if I had not removed the small piece of plastic inside each yellow plug that would prevent them from plugging into factory plugs.
Therefore you are incorrect, these are pretty much perfect and useful. Thank you for contributing, chief. Quote:
|
|
Appreciate
0
|
10-18-2021, 03:58 PM | #5 | |
Captain
1130
Rep 828
Posts |
Quote:
FWIW this is the difference between the stock EDC connector and the KW EDC delete connectors so I am assuming you just removed that one slat inside the KW yellow connectors? Beyond me why they made them this way either instead of making them plug and play Removing the wires from the stock side connectors are a real bitch. |
|
Appreciate
0
|
10-18-2021, 04:20 PM | #6 | |
Major General
964
Rep 5,033
Posts |
Buyer only needs to know that when they go to install that it will, just as it was run on my car for the duration of my ownership.
In that pic the top left most piece of plastic inside the yellow connector needs to be removed with a fine tip on a soldering iron, and then will slide onto stock connector. My kit was shipped absent the connector pieces, and I could not wait to get my car ready to be on track, so had to use some ingenuity. Quote:
|
|
Appreciate
1
dms-011129.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|