03-26-2020, 08:56 AM | #1 |
Lieutenant Colonel
1932
Rep 1,532
Posts |
VTT - New Product Release - Billet Motor Mount Inserts
Here at VTT we have been painfully aware of the relatively poor choices for motor mount upgrades for the N5X platform for quite a while. While there are some options on the market, they are either A. Expensive, B. simply do not fit well, C. Have harsh NVH and road manners, or D. a combo of all of the above. What we decided to do, is do what BMW does for their own factory race cars (Except BMW wants $150 each). That is instead of completely replacing the mount, simply make a billet aluminum insert for them. This leaves the feel of the factory mount in place but stiffens them up quite a bit removing unwanted engine movement without rattling your teeth out or emptying your wallet.
We have made two styles, and using a combo of both they fit the chassis line up across the board - N54, N55, and S55, N20 and most B58 engines! We found on the N54 after install with the stock idle level you will feel an increase of NVH at idle which goes way when driving, but a simple idle increase to 800-900RPM with MHD gets rid of this for a near-stock feel at idle. Shifts are incredibly crisp with no engine movement, and you get more of a sense of a planted feel. Install is simple, remove your mounts, install these using either a rubber mallet or soft blow hammer, or light press, and reinstall your mounts. We also offer Ready to install mount kits for even less work, and if your stock mounts are in need of replacement. These include Inserts pre-installed into a set of Aftermarket N54 mounts and preinstalled into a set of OEM mounts. Pricing is as follows: N54, E/F N55, N20, B58 Both Billet inserts ONLY - See Site for Pricing S55 Both Billet inserts ONLY - See Site for Pricing N54/ E-Series N55, N20 Both billet inserts + New aftermarket mounts - See Site for Pricing N54 / E-Series N55, N20 Both inserts + New Genuine OEM mounts - See Site for Pricing F-Series N55/B58 Both inserts + New aftermarket mounts - See Site for Pricing F-Series N55/B58 Both inserts + New OEM mounts - See Site for Pricing F8X S55 Both inserts + new OEM mounts - See Site for Pricing Can be ordered here: https://vargasturbo.com/product/vtt-...mount-inserts/ 100 sets in stock ready to ship. (if ordered with a complete mount kit may take an extra 1-2 days before shipping) Last edited by Chris@VargasTurboTech; 03-27-2020 at 12:01 AM.. |
03-26-2020, 10:46 AM | #2 |
BimmerPost Supporting Vendor
24166
Rep 190,725
Posts |
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
1
Chris@VargasTurboTech1932.00 |
03-26-2020, 07:54 PM | #3 | |
Major
2050
Rep 1,200
Posts |
Quote:
22118431709 - 60.79USD 22118416823 - 115.96USD Decision is pretty simple here...will be buying the BMW Motorsport ones.
__________________
575RWHP F87 M2C - ECUTEK RACEROM with flex fuel tuning by Bend Calibration 1000+RWHP E46 M3, Lab22 Built Turbo S54, Bend Calibration Tuned - BMW Half Mile Record Holder |
|
Appreciate
0
|
03-26-2020, 08:08 PM | #4 |
Car Noob
79
Rep 87
Posts |
|
Appreciate
1
behindthen0thing839.50 |
03-26-2020, 08:27 PM | #5 |
Major
2050
Rep 1,200
Posts |
Checkout Schmiedmann with those PN's. I have other contacts that might be cheaper so I'm going to explore those when I decide to pull the trigger.
__________________
575RWHP F87 M2C - ECUTEK RACEROM with flex fuel tuning by Bend Calibration 1000+RWHP E46 M3, Lab22 Built Turbo S54, Bend Calibration Tuned - BMW Half Mile Record Holder |
Appreciate
0
|
03-26-2020, 10:04 PM | #6 |
Colonel
213
Rep 2,602
Posts |
So....why is the link down?
__________________
|
Appreciate
1
Chris@VargasTurboTech1932.00 |
03-27-2020, 12:01 AM | #7 |
Lieutenant Colonel
1932
Rep 1,532
Posts |
|
Appreciate
0
|
03-27-2020, 07:37 AM | #8 |
Lieutenant Colonel
1932
Rep 1,532
Posts |
|
Appreciate
1
Commanderwiggin2050.00 |
07-21-2022, 02:32 AM | #11 |
Second Lieutenant
52
Rep 263
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|