|
Post Reply |
|
Thread Tools | Search this Thread |
07-04-2022, 06:38 PM | #67 | |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
07-05-2022, 09:35 AM | #68 |
New Member
2
Rep 25
Posts |
Thanks for your help again, I manage to Flash the HU-CIC this morning successfully. Still getting my gremlins though so I'm going to have to try get some 2nd hand modules and code them in and see if that does anything. If not I'll be getting the pink bike.
|
Appreciate
0
|
07-05-2022, 10:27 AM | #69 |
Private
101
Rep 72
Posts |
Hey Guys,
i think ive made a mistake in the coding process so ive got a Error by Esys [short vin invalid character). First i've made some changes with my Car and after that ive started to code with the car of my father (same G20) ive think ive forgotten to Read the new (Fahrzeugauftrag) can i get this fixed? The error occurs only at BDC-Body3 |
Appreciate
0
|
07-05-2022, 10:54 AM | #70 | |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
07-05-2022, 12:49 PM | #72 |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
This is when doing what? Read CPS from an ECU?
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
07-05-2022, 02:32 PM | #73 |
Private
101
Rep 72
Posts |
|
Appreciate
0
|
07-05-2022, 03:01 PM | #74 | |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
E-Sys => Expert Mode => FSC Extended=> WriteDataByIdentifierVIN = Enter xxxxxCARxVINxxxxx => Press “Start” button and check Log window for “ok” result.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
1
Seans10.00 |
07-06-2022, 06:20 AM | #75 |
Private
101
Rep 72
Posts |
22-07-06 13:29:56,617 [INFO] [] com.bmw.psdz.jobs.uds.MCD3_ReadCPSfromECU: sjob READ_CPS_FROM_ECU/MCD3_ReadCPSfromECU finished Result: [Response 0: [POS_RESP_MESSAGE: job succeeded], [DATA: (7) ff ff ff ff ff ff ff ]] [Thread-67]
22-07-06 13:29:56,617 [INFO] [] com.bmw.prodias.collections.mcd.AbstractNamedColle ction: provided name TP_CONTROL doesn't map to an item [Thread-67] 22-07-06 13:29:56,617 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: Could not read TP_CONTROL successfully cause Code=49184, CodeDescription='Object with name not found', Severity=2051, VendorCode=3, VendorCodeDescription='provided name TP_CONTROL doesn't map to an item' [Thread-67] 22-07-06 13:29:56,617 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: Could not get TP_CONTROL from MCDResponse, the reading of TP_CONTROL will be ignored. [Thread-67] 22-07-06 13:29:56,617 [DEEP_TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: update ECU statistics from job: DA: 0x40 State: 2 [Thread-67] 22-07-06 13:29:56,617 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: removing Job: ECUId:BDC_BODY3_0x40com.bmw.prodias.execution.prim itives.mcd.SingleEcuJob[state=25089, primitiveSN=READ_CPS_FROM_ECU, logicalLinkSN=BDC_BODY3_40_ETHERNET] [Thread-67] 22-07-06 13:29:56,617 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LegacyJobW rapper: removed Job: ECUId:BDC_BODY3_0x40com.bmw.prodias.execution.prim itives.mcd.SingleEcuJob[state=25089, primitiveSN=READ_CPS_FROM_ECU, logicalLinkSN=BDC_BODY3_40_ETHERNET] [Thread-67] 22-07-06 13:29:56,617 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LinkPool: closeECUConnection started [Thread-67] 22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.LinkPool: detaching from logical link BDC_BODY3_40_ETHERNET use count = 0 [Thread-67] 22-07-06 13:29:56,618 [DEEP_TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.Configured DProject: execute stopCom on logicalLink BDC_BODY3_40_ETHERNET [Thread-67] 22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.Configured DProject: trying to remove logical link BDC_BODY3_40_ETHERNET from project [Thread-67] 22-07-06 13:29:56,618 [INFO] [] com.bmw.prodias.execution.DefaultJobProcessor: logical link BDC_BODY3_40_ETHERNET is not cleanly removable, but will remove (and reset) it anyway [Thread-67] 22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.vehicle.connection.wrapper.Configured DProject: successfully removed logical link [Thread-67] 22-07-06 13:29:56,618 [TRACE] [] com.bmw.psdz.vehicle.connection.wrapper.LinkPool: closeECUConnection finished [Thread-67] 22-07-06 13:29:56,618 [TRACE] [] com.bmw.psdz.vehicle.connection.bf.Coding1Jobs: requestCPSfromECU finished for BDC_BODY3 [Thread-67] 22-07-06 13:29:56,618 [DEBUG] [] com.bmw.psdz.connection.facade.ConnectionImpl: unlockProgrammingTarget started for TargetSelector: Project=S18A_21_11_566_V_004_000_001, VehicleInfo=S18A [Thread-67] 22-07-06 13:29:56,618 [INFO] [] com.bmw.psdz.api.impl.bf.ECUBF: API: requestCPS(Connection pConnection,ECUIdentifier pECUIdentifier) finished [Thread-67] 22-07-06 13:29:56,618 [TRACE] [] com.bmw.esys.domain.psdz.Psdz: Result CPS: [B@69a08b9d [Thread-67] 22-07-06 13:29:56,618 [INFO] [] com.bmw.esys.domain.psdz.Psdz: PSdZ: requestCPS Ende [Thread-67] 22-07-06 13:29:56,623 [WARN] [] com.bmw.esys.commons.exception.EsysExceptionHandle r: E-Sys Error -- <CpsData object contains a Short-Vin with an invalid character.> [Thread-67] com.bmw.esys.commons.exception.EsysException: <CpsData object contains a Short-Vin with an invalid character.> at com.bmw.esys.domain.cps.CpsData.verifyShortVin(Cps Data.java:219) at com.bmw.esys.domain.cps.CpsData.generateCpsFromByt eArray(CpsData.java:202) at com.bmw.esys.domain.cps.CpsData.valueOf(CpsData.ja va:70) at com.bmw.esys.domain.cps.CpsUtils.readCps(CpsUtils. java:22) at com.bmw.esys.gui.coding.CodingController.readCps(C odingController.java:652) at com.bmw.esys.gui.coding.CodingController.doReadCod ingdata(CodingController.java:675) at com.bmw.esys.gui.coding.CodingController.readCodin gdata(CodingController.java:704) at com.bmw.esys.gui.coding.CodingView$CodingPanel$Rea dCodingdataAction.doActionPerformed(CodingView.jav a:567) at com.bmw.esys.gui.AbstractView$AbstractGuiProgressA ction$1.init(AbstractView.java:486) at com.bmw.esys.gui.component.DialogProgress$2.constr uct(DialogProgress.java:153) at com.bmw.esys.gui.component.SwingWorker.lambda$new$ 1(SwingWorker.java:133) at java.lang.Thread.run(Unknown Source) ive tried the step with the WriteDataByIdentifierVIN but it dont works Last edited by ring0r; 07-06-2022 at 07:08 AM.. |
Appreciate
0
|
07-06-2022, 09:23 AM | #76 |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
"doesn't map to an item" normally means incorrect E-Sys Connection Target, or you have FrankenPSdZdata, where new PSdZData version folder was copied on top of older version, rather then deleting and replacing.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
1
Seans10.00 |
07-13-2022, 02:47 AM | #77 |
Private
101
Rep 72
Posts |
I broke the BDC control unit. I coded the CAFD of my Car to my father's and then everything was bricked ... luckily I know a few people from the BMW dealership who flashed the control units for me with ISTA... :] Now everything works flaweless
|
Appreciate
0
|
07-13-2022, 09:13 AM | #78 |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
07-18-2022, 09:26 AM | #80 |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Your Receive PM function is disabled. PM me when working.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
07-24-2022, 11:17 AM | #82 |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Assuming you can use old Launcher PRO 2.8.1, all you need including .est Token and Activation Code is in Post #1.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
07-30-2022, 08:01 AM | #83 |
Brigadier General
423
Rep 4,499
Posts |
Hi Guys
I wonder if someone can help me, I generate EST and put it in my E-sys folder I launch PRO and select the path where the new EST is and I click Launch Now and then I get an error message "EST software token is invalid Invalid token" can someone let me know what I am missing or doing wrong? Thanks in advance!
__________________
Have BT Tool professional, will scan and clear codes on your BMW. And now I am able to code my 2011 335is and M4
Link to my M4 euro delivery! http://f80.bimmerpost.com/forums/sho....php?t=1006526 |
Appreciate
0
|
07-30-2022, 09:42 AM | #84 | |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
08-13-2022, 10:28 AM | #85 |
New Member
0
Rep 5
Posts |
Same for me
I cannot activate my pm system right now. Are there other ways like E-Mail? fernst1291@gmx.de Big Thanks |
Appreciate
0
|
08-13-2022, 10:30 AM | #86 | |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
08-13-2022, 10:38 AM | #87 |
New Member
0
Rep 5
Posts |
"In order to use the PM system and be a full fledged member of this community, you will have to make a certain number of verified post replies and wait 7 days for your account to be upgraded"
I'm going to wait then. I just want to code the checkbox for traffic information within the NBT evo module. Do I need a token therefore or is the normal esys sufficient? |
Appreciate
0
|
08-13-2022, 10:40 AM | #88 | |
General
10539
Rep 41,181
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
1
Seans10.00 |
Post Reply |
Bookmarks |
|
|